[PATCH 1/8] crypto: hisilicon/qm - numbers are replaced by macros

[Weili Qian]

Some numbers are replaced by macros to avoid incomprehension.

Signed-off-by: Weili Qian <qianwe...@huawei.com>
Reviewed-by: Zhou Wang <wangzh...@hisilicon.com>
---
 drivers/crypto/hisilicon/qm.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
index 050fe4e..1de3aac 100644
--- a/drivers/crypto/hisilicon/qm.c
+++ b/drivers/crypto/hisilicon/qm.c
@@ -473,7 +473,7 @@ static int qm_wait_mb_ready(struct hisi_qm *qm)
 
        return readl_relaxed_poll_timeout(qm->io_base + QM_MB_CMD_SEND_BASE,
                                          val, !((val >> QM_MB_BUSY_SHIFT) &
-                                         0x1), 10, 1000);
+                                         0x1), POLL_PERIOD, POLL_TIMEOUT);
 }
 
 /* 128 bit should be written to hardware at one time to trigger a mailbox */
@@ -583,7 +583,8 @@ static int qm_dev_mem_reset(struct hisi_qm *qm)
 
        writel(0x1, qm->io_base + QM_MEM_START_INIT);
        return readl_relaxed_poll_timeout(qm->io_base + QM_MEM_INIT_DONE, val,
-                                         val & BIT(0), 10, 1000);
+                                         val & BIT(0), POLL_PERIOD,
+                                         POLL_TIMEOUT);
 }
 
 static u32 qm_get_irq_num_v1(struct hisi_qm *qm)
@@ -804,7 +805,8 @@ static int qm_set_vft_common(struct hisi_qm *qm, enum 
vft_type type,
        int ret;
 
        ret = readl_relaxed_poll_timeout(qm->io_base + QM_VFT_CFG_RDY, val,
-                                        val & BIT(0), 10, 1000);
+                                        val & BIT(0), POLL_PERIOD,
+                                        POLL_TIMEOUT);
        if (ret)
                return ret;
 
@@ -818,7 +820,8 @@ static int qm_set_vft_common(struct hisi_qm *qm, enum 
vft_type type,
        writel(0x1, qm->io_base + QM_VFT_CFG_OP_ENABLE);
 
        return readl_relaxed_poll_timeout(qm->io_base + QM_VFT_CFG_RDY, val,
-                                         val & BIT(0), 10, 1000);
+                                         val & BIT(0), POLL_PERIOD,
+                                         POLL_TIMEOUT);
 }
 
 /* The config should be conducted after qm_dev_mem_reset() */
@@ -1785,10 +1788,11 @@ static int qm_qp_ctx_cfg(struct hisi_qp *qp, int qp_id, 
u32 pasid)
 
        INIT_QC_COMMON(cqc, qp->cqe_dma, pasid);
        if (ver == QM_HW_V1) {
-               cqc->dw3 = cpu_to_le32(QM_MK_CQC_DW3_V1(0, 0, 0, 4));
+               cqc->dw3 = cpu_to_le32(QM_MK_CQC_DW3_V1(0, 0, 0,
+                                                       QM_QC_CQE_SIZE));
                cqc->w8 = cpu_to_le16(QM_Q_DEPTH - 1);
        } else {
-               cqc->dw3 = cpu_to_le32(QM_MK_CQC_DW3_V2(4));
+               cqc->dw3 = cpu_to_le32(QM_MK_CQC_DW3_V2(QM_QC_CQE_SIZE));
                cqc->w8 = 0;
        }
        cqc->dw6 = cpu_to_le32(1 << QM_CQ_PHASE_SHIFT | 1 << QM_CQ_FLAG_SHIFT);
@@ -2011,7 +2015,8 @@ static void hisi_qm_cache_wb(struct hisi_qm *qm)
 
        writel(0x1, qm->io_base + QM_CACHE_WB_START);
        if (readl_relaxed_poll_timeout(qm->io_base + QM_CACHE_WB_DONE,
-                                           val, val & BIT(0), 10, 1000))
+                                      val, val & BIT(0), POLL_PERIOD,
+                                      POLL_TIMEOUT))
                dev_err(&qm->pdev->dev, "QM writeback sqc cache fail!\n");
 }
 
-- 
2.8.1