Hi!
On Fri, Oct 30, 2020 at 11:43:22PM +0000, Matteo Scordino wrote:
> The Elimo Engineering Impetus is an Open Source Hardware System-on-Module
> based on the SoChip S3 SoC.
>
> It is meant for integration into carrier boards or, more generally,
> larger designs, and uses an M2 connector to facilitate that.
>
> Interfaces on the M.2/NGFF 42mm connector:
> WiFi IEEE 802. 11abgn (on-module Realtek)
> Bluetooth 4.2/BLE (on-module Realtek)
> RGB LCD Interface (on-module connector)
> MIPI Camera Interface (on-module connector)
> IEEE 802. 3u Ethernet MAC (external connecto)
> USB2.0 (Host, Device, OTG) (external connector)
> Audio Line In/Out (external connector)
>
> Signed-off-by: Matteo Scordino <matteo.scord...@gmail.com>
> ---
> arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi | 51 +++++++++++++++++++
> 1 file changed, 51 insertions(+)
> create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
>
> diff --git a/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
> b/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
> new file mode 100644
> index 000000000000..f219188fc9ba
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
> @@ -0,0 +1,51 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2020 Matteo Scordino <mat...@elimo.io>
> + */
> +
> +/dts-v1/;
> +#include "sun8i-v3.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +
> +/ {
> + model = "Elimo Impetus SoM";
> + compatible = "elimo,impetus", "sochip,s3", "allwinner,sun8i-v3";
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&mmc0 {
> + broken-cd;
> + bus-width = <4>;
> + vmmc-supply = <®_vcc3v3>;
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-0 = <&uart0_pb_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-0 = <&uart1_pg_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};What is uart1 used for? the BT chip? Maxime
signature.asc
Description: PGP signature
