From: Sven Van Asbroeck <thesve...@gmail.com>

Commit 6f197fb63850 ("lan743x: Added fixed link and RGMII support")
assumes that chips with an internal PHY will never have a devicetree
entry. This is incorrect: even for these chips, a devicetree entry
can be useful e.g. to pass the mac address from bootloader to chip:

    &pcie {
            status = "okay";

            host@0 {
                    reg = <0 0 0 0 0>;

                    #address-cells = <3>;
                    #size-cells = <2>;

                    lan7430: ethernet@0 {
                            /* LAN7430 with internal PHY */
                            compatible = "microchip,lan743x";
                            status = "okay";
                            reg = <0 0 0 0 0>;
                            /* filled in by bootloader */
                            local-mac-address = [00 00 00 00 00 00];
                    };
            };
    };

If a devicetree entry is present, the driver will not attach the chip
to its internal phy, and the chip will be non-operational.

Fix by tweaking the phy connection algorithm:
- first try to connect to a phy specified in the devicetree
  (could be 'real' phy, or just a 'fixed-link')
- if that doesn't succeed, try to connect to an internal phy, even
  if the chip has a devnode

Tested on a LAN7430 with internal PHY. I cannot test a device using
fixed-link, as I do not have access to one.

Fixes: 6f197fb63850 ("lan743x: Added fixed link and RGMII support")
Tested-by: Sven Van Asbroeck <thesve...@gmail.com> # lan7430
Signed-off-by: Sven Van Asbroeck <thesve...@gmail.com>
---

v1 -> v2:
    Andrew Lunn: keep patch minimal and correct, so keep open-coded version
    of of_phy_get_and_connect().

    Jakub Kicinski: fix e-mail address case.

Tree: v5.10-rc2

To: Andrew Lunn <and...@lunn.ch>
To: Bryan Whitehead <bryan.whiteh...@microchip.com>
To: "David S. Miller" <da...@davemloft.net>
To: Jakub Kicinski <k...@kernel.org>
Cc: Microchip Linux Driver Support <unglinuxdri...@microchip.com>
Cc: Roelof Berg <rb...@berg-solutions.de>
Cc: net...@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

 drivers/net/ethernet/microchip/lan743x_main.c | 21 +++++++++++--------
 drivers/net/ethernet/microchip/lan743x_main.h |  1 -
 2 files changed, 12 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/microchip/lan743x_main.c 
b/drivers/net/ethernet/microchip/lan743x_main.c
index f2d13e8d20f0..65e80d41c9bc 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -957,7 +957,7 @@ static void lan743x_phy_link_status_change(struct 
net_device *netdev)
                data = lan743x_csr_read(adapter, MAC_CR);
 
                /* set interface mode */
-               if (phy_interface_mode_is_rgmii(adapter->phy_mode))
+               if (phy_interface_is_rgmii(phydev))
                        /* RGMII */
                        data &= ~MAC_CR_MII_EN_;
                else
@@ -1014,17 +1014,18 @@ static void lan743x_phy_close(struct lan743x_adapter 
*adapter)
 static int lan743x_phy_open(struct lan743x_adapter *adapter)
 {
        struct lan743x_phy *phy = &adapter->phy;
+       struct phy_device *phydev = NULL;
        struct device_node *phynode;
-       struct phy_device *phydev;
        struct net_device *netdev;
+       phy_interface_t phy_mode;
        int ret = -EIO;
 
        netdev = adapter->netdev;
        phynode = of_node_get(adapter->pdev->dev.of_node);
-       adapter->phy_mode = PHY_INTERFACE_MODE_GMII;
 
        if (phynode) {
-               of_get_phy_mode(phynode, &adapter->phy_mode);
+               /* try devicetree phy, or fixed link */
+               of_get_phy_mode(phynode, &phy_mode);
 
                if (of_phy_is_fixed_link(phynode)) {
                        ret = of_phy_register_fixed_link(phynode);
@@ -1037,18 +1038,19 @@ static int lan743x_phy_open(struct lan743x_adapter 
*adapter)
                }
                phydev = of_phy_connect(netdev, phynode,
                                        lan743x_phy_link_status_change, 0,
-                                       adapter->phy_mode);
+                                       phy_mode);
                of_node_put(phynode);
-               if (!phydev)
-                       goto return_error;
-       } else {
+       }
+
+       if (!phydev) {
+               /* try internal phy */
                phydev = phy_find_first(adapter->mdiobus);
                if (!phydev)
                        goto return_error;
 
                ret = phy_connect_direct(netdev, phydev,
                                         lan743x_phy_link_status_change,
-                                        adapter->phy_mode);
+                                        PHY_INTERFACE_MODE_GMII);
                if (ret)
                        goto return_error;
        }
@@ -1063,6 +1065,7 @@ static int lan743x_phy_open(struct lan743x_adapter 
*adapter)
 
        phy_start(phydev);
        phy_start_aneg(phydev);
+       phy_attached_info(phydev);
        return 0;
 
 return_error:
diff --git a/drivers/net/ethernet/microchip/lan743x_main.h 
b/drivers/net/ethernet/microchip/lan743x_main.h
index a536f4a4994d..3a0e70daa88f 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.h
+++ b/drivers/net/ethernet/microchip/lan743x_main.h
@@ -703,7 +703,6 @@ struct lan743x_rx {
 struct lan743x_adapter {
        struct net_device       *netdev;
        struct mii_bus          *mdiobus;
-       phy_interface_t         phy_mode;
        int                     msg_enable;
 #ifdef CONFIG_PM
        u32                     wolopts;
-- 
2.17.1

Reply via email to