From: Sven Van Asbroeck <[email protected]>
This driver makes sure the underlying SPI bus is set to "mode 0"
by assigning SPI_MODE_0 to spi->mode. Which overwrites all other
SPI mode flags.
In some circumstances, this can break the underlying SPI bus driver.
For example, if SPI_CS_HIGH is set on the SPI bus, the driver
will clear that flag, which results in a chip-select polarity issue.
Fix by changing only the SPI_MODE_N bits, i.e. SPI_CPHA and SPI_CPOL.
Fixes: a8e510f682fe ("phy: Micrel KS8995MA 5-ports 10/100 managed Ethernet
switch support added")
Fixes: f3186dd87669 ("spi: Optionally use GPIO descriptors for CS GPIOs")
Link:
https://patchwork.kernel.org/project/spi-devel-general/patch/[email protected]/#23747737
Signed-off-by: Sven Van Asbroeck <[email protected]>
---
Tree: git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git #
989ef49bdf10
To be followed by a proposed spi helper function. Submit to net-next after net
gets merged into net-next.
# large number of people, from get_maintainer.pl
To: Andrew Lunn <[email protected]>
To: Heiner Kallweit <[email protected]>
To: Jakub Kicinski <[email protected]>
Cc: Russell King <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Mark Brown <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Frederic LAMBERT <[email protected]>
Cc: Gabor Juhos <[email protected]>
Cc: Jonathan Cameron <[email protected]>
# Cc SPI group, suggested by Jakub Kicinski
Cc: [email protected]
drivers/net/phy/spi_ks8995.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/spi_ks8995.c b/drivers/net/phy/spi_ks8995.c
index 4b198399bfa2..3c6c87a09b03 100644
--- a/drivers/net/phy/spi_ks8995.c
+++ b/drivers/net/phy/spi_ks8995.c
@@ -491,7 +491,9 @@ static int ks8995_probe(struct spi_device *spi)
spi_set_drvdata(spi, ks);
- spi->mode = SPI_MODE_0;
+ /* use SPI_MODE_0 without changing any other mode flags */
+ spi->mode &= ~(SPI_CPHA | SPI_CPOL);
+ spi->mode |= SPI_MODE_0;
spi->bits_per_word = 8;
err = spi_setup(spi);
if (err) {
--
2.17.1
