Hi Rob,
From: Sameer Pujar <spu...@nvidia.com>
Convert device tree bindings of graph to YAML format. Currently graph.txt
doc is referenced in multiple files and all of these need to use schema
references. For now graph.txt is updated to refer to graph.yaml.
For users of the graph binding, they should reference to the graph
schema from either 'ports' or 'port' property:
properties:
ports:
type: object
$ref: graph.yaml#/properties/ports
properties:
port@0:
description: What data this port has
...
Or:
properties:
port:
description: What data this port has
type: object
$ref: graph.yaml#/properties/port
Signed-off-by: Sameer Pujar <spu...@nvidia.com>
Acked-by: Philipp Zabel <p.za...@pengutronix.de>
Signed-off-by: Rob Herring <r...@kernel.org>
---
v3:
- Move port 'reg' to port@* and make required
- Make remote-endpoint required
- Add 'additionalProperties: true' now required
- Fix yamllint warnings
Documentation/devicetree/bindings/graph.txt | 129 +-----------
Documentation/devicetree/bindings/graph.yaml | 199 +++++++++++++++++++
2 files changed, 200 insertions(+), 128 deletions(-)
create mode 100644 Documentation/devicetree/bindings/graph.yaml
...
diff --git a/Documentation/devicetree/bindings/graph.yaml
b/Documentation/devicetree/bindings/graph.yaml
new file mode 100644
index 000000000000..b56720c5a13e
--- /dev/null
+++ b/Documentation/devicetree/bindings/graph.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/graph.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common bindings for device graphs
+
+description: |
+ The hierarchical organisation of the device tree is well suited to describe
+ control flow to devices, but there can be more complex connections between
+ devices that work together to form a logical compound device, following an
+ arbitrarily complex graph.
+ There already is a simple directed graph between devices tree nodes using
+ phandle properties pointing to other nodes to describe connections that
+ can not be inferred from device tree parent-child relationships. The device
+ tree graph bindings described herein abstract more complex devices that can
+ have multiple specifiable ports, each of which can be linked to one or more
+ ports of other devices.
+
+ These common bindings do not contain any information about the direction or
+ type of the connections, they just map their existence. Specific properties
+ may be described by specialized bindings depending on the type of connection.
+
+ To see how this binding applies to video pipelines, for example, see
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+ Here the ports describe data interfaces, and the links between them are
+ the connecting data buses. A single port with multiple connections can
+ correspond to multiple devices being connected to the same physical bus.
+
+maintainers:
+ - Philipp Zabel <p.za...@pengutronix.de>
+
+select: false
+
+properties:
+ port:
+ type: object
+ description:
+ If there is more than one endpoint node or 'reg' property present in
+ endpoint nodes then '#address-cells' and '#size-cells' properties are
+ required.
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ patternProperties:
+ "^endpoint(@[0-9a-f]+)?$":
+ type: object
+ properties:
+ reg:
+ maxItems: 1
+
+ remote-endpoint:
+ description: |
+ phandle to an 'endpoint' subnode of a remote device node.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ required:
+ - remote-endpoint
Does 'remote-endpoint' have to be a required property?
In case of pluggable modules, the remote-endpoint may not be available
unless the module is plugged in. In other words, device-2 in below
example may not always be available, but still device-1 endpoint
configuration and usage may be required?
...
+ # Links between endpoints:
+ #
+ # Each endpoint should contain a 'remote-endpoint' phandle property that
+ # points to the corresponding endpoint in the port of the remote device.
+ # In turn, the remote endpoint should contain a 'remote-endpoint' property.
+ # If it has one, it must not point to anything other than the local endpoint.
+ # Two endpoints with their 'remote-endpoint' phandles pointing at each other
+ # form a link between the containing ports.
+ - |
+ device-1 {
+ port {
+ device_1_output: endpoint {
+ remote-endpoint = <&device_2_input>;
+ };
+ };
+ };
+
+ device-2 {
+ port {
+ device_2_input: endpoint {
+ remote-endpoint = <&device_1_output>;
+ };
+ };
+ };
+
+...
--
2.25.1
