[PATCH v2] clk: Add hardware-enable column to clk summary

[Dmitry Osipenko]

Add "hardware enable" column to the clk summary in order to show actual
hardware enable-state of all clocks. The possible states are "Y/N/?",
where question mark means that state is unknown, i.e. clock isn't a
mux and clk-driver doesn't support is_enabled() callback for this clock.

In conjunction with clk_ignore_unused, this tells us what unused clocks
are left enabled after bootloader. This is also useful a useful aid for
debugging interactions with firmware which changes clock states without
notifying kernel.

Signed-off-by: Dmitry Osipenko <dig...@gmail.com>
---

Changelog:

v2: - Renamed "enable state" column to "hardware enable" and changed
      reported values to Y/N/?

    - Improved commit message.

 drivers/clk/clk.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index f83dac54ed85..c2cbf3618680 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2931,7 +2931,14 @@ static void clk_summary_show_one(struct seq_file *s, 
struct clk_core *c,
        else
                seq_puts(s, "-----");
 
-       seq_printf(s, " %6d\n", clk_core_get_scaled_duty_cycle(c, 100000));
+       seq_printf(s, " %6d", clk_core_get_scaled_duty_cycle(c, 100000));
+
+       if (c->ops->is_enabled)
+               seq_printf(s, " %9c\n", clk_core_is_enabled(c) ? 'Y' : 'N');
+       else if (!c->ops->enable)
+               seq_printf(s, " %9c\n", 'Y');
+       else
+               seq_printf(s, " %9c\n", '?');
 }
 
 static void clk_summary_show_subtree(struct seq_file *s, struct clk_core *c,
@@ -2950,9 +2957,9 @@ static int clk_summary_show(struct seq_file *s, void 
*data)
        struct clk_core *c;
        struct hlist_head **lists = (struct hlist_head **)s->private;
 
-       seq_puts(s, "                                 enable  prepare  protect  
                              duty\n");
-       seq_puts(s, "   clock                          count    count    count  
      rate   accuracy phase  cycle\n");
-       seq_puts(s, 
"---------------------------------------------------------------------------------------------\n");
+       seq_puts(s, "                                 enable  prepare  protect  
                              duty  hardware\n");
+       seq_puts(s, "   clock                          count    count    count  
      rate   accuracy phase  cycle    enable\n");
+       seq_puts(s, 
"-------------------------------------------------------------------------------------------------------\n");
 
        clk_prepare_lock();
 
-- 
2.29.2