[PATCH 1/3] ARM: dts: sam9x60: add pincontrol for USB Host

[cristian.birsan]

From: Cristian Birsan <cristian.bir...@microchip.com>

The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without
it the driver probes but VBus is not powered because of wrong pincontrol
configuration.

Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and 
board")
Signed-off-by: Cristian Birsan <cristian.bir...@microchip.com>
---
 arch/arm/boot/dts/at91-sam9x60ek.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts 
b/arch/arm/boot/dts/at91-sam9x60ek.dts
index eae28b82c7fd..0e3b6147069f 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -569,6 +569,13 @@ pinctrl_usba_vbus: usba_vbus {
                        atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO 
AT91_PINCTRL_NONE>;
                };
        };
+
+       usb1 {
+               pinctrl_usb_default: usb_default {
+                       atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO 
AT91_PINCTRL_NONE
+                                     AT91_PIOD 16 AT91_PERIPH_GPIO 
AT91_PINCTRL_NONE>;
+               };
+       };
 }; /* pinctrl */
 
 &pmc {
@@ -684,6 +691,8 @@ &usb1 {
        atmel,vbus-gpio = <0
                           &pioD 15 GPIO_ACTIVE_HIGH
                           &pioD 16 GPIO_ACTIVE_HIGH>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usb_default>;
        status = "okay";
 };
 
-- 
2.25.1