Hi,
On 17/11/2020 0.20, Viorel Suman (OSS) wrote:
> From: Viorel Suman <[email protected]>
>
> Using GPIO API seems not a way to go for the case
> when the same reset GPIO is used to control several codecs.
> For a such case we can use the "gpio-reset" driver
> and the "shared" reset API to manage the reset GPIO -
> to deassert the reset when the first codec is powered up
> and assert it when there is no codec in use.
> DTS is supposed to look as follows:
>
> / {
> ak4458_reset: gpio-reset {
> compatible = "gpio-reset";
> reset-gpios = <&pca6416 4 GPIO_ACTIVE_LOW>;
> #reset-cells = <0>;
> initially-in-reset;
I can not find anything resembling to this in next-20201119.
Where is the implementation and documentation for this gpio-reset?
> };
> };
>
> &i2c3 {
> pca6416: gpio@20 {
> compatible = "ti,tca6416";
> reg = <0x20>;
> gpio-controller;
> #gpio-cells = <2>;
> };
>
> ak4458_1: ak4458@10 {
> compatible = "asahi-kasei,ak4458";
> reg = <0x10>;
> resets = <&ak4458_reset>;
> };
>
> ak4458_2: ak4458@11 {
> compatible = "asahi-kasei,ak4458";
> reg = <0x11>;
> resets = <&ak4458_reset>;
> };
>
> ak4458_3: ak4458@12 {
> compatible = "asahi-kasei,ak4458";
> reg = <0x12>;
> resets = <&ak4458_reset>;
> };
> };
>
> Signed-off-by: Viorel Suman <[email protected]>
> ---
> sound/soc/codecs/ak4458.c | 23 +++++++++++------------
> 1 file changed, 11 insertions(+), 12 deletions(-)
>
> diff --git a/sound/soc/codecs/ak4458.c b/sound/soc/codecs/ak4458.c
> index 1010c9ee2e83..f27727cb1382 100644
> --- a/sound/soc/codecs/ak4458.c
> +++ b/sound/soc/codecs/ak4458.c
> @@ -13,6 +13,7 @@
> #include <linux/of_gpio.h>
> #include <linux/pm_runtime.h>
> #include <linux/regulator/consumer.h>
> +#include <linux/reset.h>
> #include <linux/slab.h>
> #include <sound/initval.h>
> #include <sound/pcm_params.h>
> @@ -45,7 +46,7 @@ struct ak4458_priv {
> const struct ak4458_drvdata *drvdata;
> struct device *dev;
> struct regmap *regmap;
> - struct gpio_desc *reset_gpiod;
> + struct reset_control *reset;
> struct gpio_desc *mute_gpiod;
> int digfil; /* SSLOW, SD, SLOW bits */
> int fs; /* sampling rate */
> @@ -597,17 +598,17 @@ static struct snd_soc_dai_driver ak4497_dai = {
>
> static void ak4458_power_off(struct ak4458_priv *ak4458)
> {
> - if (ak4458->reset_gpiod) {
> - gpiod_set_value_cansleep(ak4458->reset_gpiod, 0);
> - usleep_range(1000, 2000);
> + if (ak4458->reset) {
> + reset_control_assert(ak4458->reset);
> + msleep(20);
> }
> }
>
> static void ak4458_power_on(struct ak4458_priv *ak4458)
> {
> - if (ak4458->reset_gpiod) {
> - gpiod_set_value_cansleep(ak4458->reset_gpiod, 1);
> - usleep_range(1000, 2000);
> + if (ak4458->reset) {
> + reset_control_deassert(ak4458->reset);
> + msleep(20);
> }
> }
>
> @@ -685,7 +686,6 @@ static int __maybe_unused ak4458_runtime_resume(struct
> device *dev)
> if (ak4458->mute_gpiod)
> gpiod_set_value_cansleep(ak4458->mute_gpiod, 1);
>
> - ak4458_power_off(ak4458);
> ak4458_power_on(ak4458);
>
> regcache_cache_only(ak4458->regmap, false);
> @@ -771,10 +771,9 @@ static int ak4458_i2c_probe(struct i2c_client *i2c)
>
> ak4458->drvdata = of_device_get_match_data(&i2c->dev);
>
> - ak4458->reset_gpiod = devm_gpiod_get_optional(ak4458->dev, "reset",
> - GPIOD_OUT_LOW);
> - if (IS_ERR(ak4458->reset_gpiod))
> - return PTR_ERR(ak4458->reset_gpiod);
> + ak4458->reset = devm_reset_control_get_optional_shared(ak4458->dev,
> NULL);
> + if (IS_ERR(ak4458->reset))
> + return PTR_ERR(ak4458->reset);
The binding documentation must be updated and you must support the gpio
way as well.
When I had this discussion around using the reset framework for shared
enable and/or reset pins it was suggested that _if_ such a driver makes
sense then it should internally handle (by using magic strings) the
fallback and work with pre-reset binding.
>
> ak4458->mute_gpiod = devm_gpiod_get_optional(ak4458->dev, "mute",
> GPIOD_OUT_LOW);
>
- Péter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
