On 10/11/2020 06:29, Frank Lee wrote:
> From: Yangtao Li <fr...@allwinnertech.com>
>
> The A100 SoC has a DMA controller that supports 8 DMA channels
> to and from various peripherals.
>
> Add a device node for it.
>
> Signed-off-by: Yangtao Li <fr...@allwinnertech.com>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> index cc321c04f121..c34ed8045363 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
> @@ -101,6 +101,18 @@ ccu: clock@3001000 {
> #reset-cells = <1>;
> };
>
> + dma: dma-controller@3002000 {
> + compatible = "allwinner,sun50i-a100-dma";
So at it appears to work with the exact same settings in the driver as
the H6, we should have that as a compatible fallback:
compatible = "allwinner,sun50i-a100-dma", "allwinner,sun50i-h6-dma";
Cheers,
Andre
> + reg = <0x03002000 0x1000>;
> + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
> + clock-names = "bus", "mbus";
> + dma-channels = <8>;
> + dma-requests = <51>;
> + resets = <&ccu RST_BUS_DMA>;
> + #dma-cells = <1>;
> + };
> +
> gic: interrupt-controller@3021000 {
> compatible = "arm,gic-400";
> reg = <0x03021000 0x1000>, <0x03022000 0x2000>,
>
