The keys on the baseboard are laid out in an diamond pattern, up, down, left, right and center. Update the descriptions to make it easier to read.
Signed-off-by: Adam Ford <[email protected]> --- .../dts/renesas/beacon-renesom-baseboard.dtsi | 20 +++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi index beaea6de547b..db3ef33faac5 100644 --- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi @@ -40,38 +40,38 @@ hdmi0_con: endpoint { keys { compatible = "gpio-keys"; - key-1 { + key-1 { /* S19 */ gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_1>; - label = "Switch-1"; + label = "Up"; wakeup-source; debounce-interval = <20>; }; - key-2 { + key-2 { /*S20 */ gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; linux,code = <KEY_2>; - label = "Switch-2"; + label = "Left"; wakeup-source; debounce-interval = <20>; }; - key-3 { + key-3 { /* S21 */ gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; linux,code = <KEY_3>; - label = "Switch-3"; + label = "Down"; wakeup-source; debounce-interval = <20>; }; - key-4 { + key-4 { /* S22 */ gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; linux,code = <KEY_4>; - label = "Switch-4"; + label = "Right"; wakeup-source; debounce-interval = <20>; }; - key-5 { + key-5 { /* S23 */ gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; linux,code = <KEY_5>; - label = "Switch-4"; + label = "Center"; wakeup-source; debounce-interval = <20>; }; -- 2.25.1
