[PATCH 1/1] ARM: dts: opos6ul: add ksz8081 phy properties

[Sébastien Szymanski]

Set clock mode and the LED mode in the device tree instead of relying on
the fixup in mach-imx6ul.

Signed-off-by: Sébastien Szymanski <sebastien.szyman...@armadeus.com>
---
 arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi 
b/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi
index f2386dcb9ff2..dda4fa91b2f2 100644
--- a/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6ul.dtsi
@@ -40,6 +40,9 @@ ethphy1: ethernet-phy@1 {
                        reg = <1>;
                        interrupt-parent = <&gpio4>;
                        interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+                       micrel,led-mode = <1>;
+                       clocks = <&clks IMX6UL_CLK_ENET_REF>;
+                       clock-names = "rmii-ref";
                        status = "okay";
                };
        };
-- 
2.26.2