On Wednesday 23 December 2020 01:02:43 Peter Chen wrote:
> On 20-12-22 14:30:51, Pali Rohár wrote:
> > On Tuesday 22 December 2020 10:23:27 Pali Rohár wrote:
> > > On Tuesday 22 December 2020 02:14:45 Peter Chen wrote:
> > > > On 20-12-21 16:09:03, Pali Rohár wrote:
> > > > > Currently init_quirk callbacks for xhci platform drivers are called
> > > > > xhci_plat_setup() function which is called after chip reset completes.
> > > > > It happens in the middle of the usb_add_hcd() function.
> > > > >
> > > > > But XHCI_SKIP_PHY_INIT quirk is checked in the xhci_plat_probe()
> > > > > function
> > > > > prior calling usb_add_hcd() function. Therefore this
> > > > > XHCI_SKIP_PHY_INIT
> > > > > currently does nothing as prior xhci_plat_setup() it is not set.
> > > > >
> > > > > Quirk XHCI_SKIP_PHY_INIT is only setting hcd->skip_phy_initialization
> > > > > value
> > > > > which really needs to be set prior calling usb_add_hcd() as this
> > > > > function
> > > > > at its beginning skips PHY init if this member is set.
> > > > >
> > > > > This patch fixes implementation of the XHCI_SKIP_PHY_INIT quirk by
> > > > > calling
> > > > > init_quirk callbacks (via xhci_priv_init_quirk()) prior checking if
> > > > > XHCI_SKIP_PHY_INIT is set.
> > > > >
> > > > > Fixes: f768e718911e0 ("usb: host: xhci-plat: add priv quirk for skip
> > > > > PHY initialization")
> > > > > Signed-off-by: Pali Rohár <p...@kernel.org>
>
> Hi Pali,
>
> I know your case, you need to choose XHCI_SKIP_PHY_INIT quirk
> conditionally, but you may can't add Fixes tag at your patch
> since your issue was existed before my patch.
Ok, no problem, in V2 I will not add it.
> Peter
>
>
> > > > > ---
> > > > > drivers/usb/host/xhci-plat.c | 14 +++++++-------
> > > > > 1 file changed, 7 insertions(+), 7 deletions(-)
> > > > >
> > > > > diff --git a/drivers/usb/host/xhci-plat.c
> > > > > b/drivers/usb/host/xhci-plat.c
> > > > > index 4d34f6005381..58704c5b002b 100644
> > > > > --- a/drivers/usb/host/xhci-plat.c
> > > > > +++ b/drivers/usb/host/xhci-plat.c
> > > > > @@ -89,13 +89,6 @@ static void xhci_plat_quirks(struct device *dev,
> > > > > struct xhci_hcd *xhci)
> > > > > /* called during probe() after chip reset completes */
> > > > > static int xhci_plat_setup(struct usb_hcd *hcd)
> > > > > {
> > > > > - int ret;
> > > > > -
> > > > > -
> > > > > - ret = xhci_priv_init_quirk(hcd);
> > > > > - if (ret)
> > > > > - return ret;
> > > > > -
> > > > > return xhci_gen_setup(hcd, xhci_plat_quirks);
> > > > > }
> > > > >
> > > > > @@ -330,6 +323,13 @@ static int xhci_plat_probe(struct
> > > > > platform_device *pdev)
> > > > >
> > > > > hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
> > > > > xhci->shared_hcd->tpl_support = hcd->tpl_support;
> > > > > +
> > > > > + if (priv) {
> > > > > + ret = xhci_priv_init_quirk(hcd);
> > > > > + if (ret)
> > > > > + goto disable_usb_phy;
> > > > > + }
> > > > > +
> > > > > if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
> > > > > hcd->skip_phy_initialization = 1;
> > > > >
> > > >
> > > > Hi Pali,
> > > >
> > > > What's problem you have met? In structure xhci_plat_priv, the quirks are
> > > > defined at .quirks entry which is got at below code. .init_quirk is the
> > > > routine if special initializations are needed.
> > >
> > > Hello!
> > >
> > > I'm talking about .init_quirk. And if XHCI_SKIP_PHY_INIT quirk is set in
> > > this function then has no effect.
> >
> > Ok, this patch is not enough, I will send V2.
> >
> > > I'm working currently on patch for xhci mvebu which conditionally enable
> > > or disable XHCI_SKIP_PHY_INIT quirk (it is going to fix existing
> > > regression since v5.1 kernel) and without this patch XHCI_SKIP_PHY_INIT
> > > quirk from the init_quirk does not work.
> >
> > And now I have tested V2 with my mvebu regression fix. I will send it to
> > mailing list for review.
> >
> > > > if (pdev->dev.of_node)
> > > > priv_match = of_device_get_match_data(&pdev->dev);
> > > > else
> > > > priv_match = dev_get_platdata(&pdev->dev);
> > > >
> > > > if (priv_match) {
> > > > priv = hcd_to_xhci_priv(hcd);
> > > > /* Just copy data for now */
> > > > *priv = *priv_match;
> > > > }
> > > > --
> > > >
> > > > Thanks,
> > > > Peter Chen
>
> --
>
> Thanks,
> Peter Chen
