From: Jeremy Cline <jer...@jcline.org> [ Upstream commit 5bfb3a4bd8f6b5329464edb9b772738708509d4a ]
Some BOSC0200 acpi_device-s describe two accelerometers in a single ACPI device. Normally we would handle this by letting the special drivers/platform/x86/i2c-multi-instantiate.c driver handle the BOSC0200 ACPI id and let it instantiate 2 bmc150_accel type i2c_client-s for us. But doing so changes the modalias for the first accelerometer (which is already supported and used on many devices) from acpi:BOSC0200 to i2c:bmc150_accel. The modalias is not only used to load the driver, but is also used by hwdb matches in /lib/udev/hwdb.d/60-sensor.hwdb which provide a mountmatrix to userspace by setting the ACCEL_MOUNT_MATRIX udev property. Switching the handling of the BOSC0200 over to i2c-multi-instantiate.c will break the hwdb matches causing the ACCEL_MOUNT_MATRIX udev prop to no longer be set. So switching over to i2c-multi-instantiate.c is not an option. Changes by Hans de Goede: -Add explanation to the commit message why i2c-multi-instantiate.c cannot be used -Also set the dev_name, fwnode and irq i2c_board_info struct members for the 2nd client Signed-off-by: Jeremy Cline <jer...@jcline.org> Signed-off-by: Hans de Goede <hdego...@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevche...@gmail.com> Link: https://lore.kernel.org/r/20201130141954.339805-2-hdego...@redhat.com BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198671 Signed-off-by: Jonathan Cameron <jonathan.came...@huawei.com> Signed-off-by: Sasha Levin <sas...@kernel.org> --- drivers/iio/accel/bmc150-accel-core.c | 21 ++++++++++++++ drivers/iio/accel/bmc150-accel-i2c.c | 41 +++++++++++++++++++++++++-- drivers/iio/accel/bmc150-accel.h | 2 ++ 3 files changed, 62 insertions(+), 2 deletions(-) diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c index bcdf25f32e220..f63743a62d2ed 100644 --- a/drivers/iio/accel/bmc150-accel-core.c +++ b/drivers/iio/accel/bmc150-accel-core.c @@ -204,6 +204,7 @@ struct bmc150_accel_data { int ev_enable_state; int64_t timestamp, old_timestamp; /* Only used in hw fifo mode. */ const struct bmc150_accel_chip_info *chip_info; + struct i2c_client *second_device; struct iio_mount_matrix orientation; }; @@ -1663,6 +1664,26 @@ int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq, } EXPORT_SYMBOL_GPL(bmc150_accel_core_probe); +struct i2c_client *bmc150_get_second_device(struct i2c_client *client) +{ + struct bmc150_accel_data *data = i2c_get_clientdata(client); + + if (!data) + return NULL; + + return data->second_device; +} +EXPORT_SYMBOL_GPL(bmc150_get_second_device); + +void bmc150_set_second_device(struct i2c_client *client) +{ + struct bmc150_accel_data *data = i2c_get_clientdata(client); + + if (data) + data->second_device = client; +} +EXPORT_SYMBOL_GPL(bmc150_set_second_device); + int bmc150_accel_core_remove(struct device *dev) { struct iio_dev *indio_dev = dev_get_drvdata(dev); diff --git a/drivers/iio/accel/bmc150-accel-i2c.c b/drivers/iio/accel/bmc150-accel-i2c.c index 06021c8685a70..8c45963fe3cdb 100644 --- a/drivers/iio/accel/bmc150-accel-i2c.c +++ b/drivers/iio/accel/bmc150-accel-i2c.c @@ -29,6 +29,8 @@ static int bmc150_accel_probe(struct i2c_client *client, i2c_check_functionality(client->adapter, I2C_FUNC_I2C) || i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK); + struct acpi_device __maybe_unused *adev; + int ret; regmap = devm_regmap_init_i2c(client, &bmc150_regmap_conf); if (IS_ERR(regmap)) { @@ -39,12 +41,47 @@ static int bmc150_accel_probe(struct i2c_client *client, if (id) name = id->name; - return bmc150_accel_core_probe(&client->dev, regmap, client->irq, name, - block_supported); + ret = bmc150_accel_core_probe(&client->dev, regmap, client->irq, name, block_supported); + if (ret) + return ret; + + /* + * Some BOSC0200 acpi_devices describe 2 accelerometers in a single ACPI + * device, try instantiating a second i2c_client for an I2cSerialBusV2 + * ACPI resource with index 1. The !id check avoids recursion when + * bmc150_accel_probe() gets called for the second client. + */ +#ifdef CONFIG_ACPI + adev = ACPI_COMPANION(&client->dev); + if (!id && adev && strcmp(acpi_device_hid(adev), "BOSC0200") == 0) { + struct i2c_board_info board_info = { + .type = "bmc150_accel", + /* + * The 2nd accel sits in the base of 2-in-1s. Note this + * name is static, as there should never be more then 1 + * BOSC0200 ACPI node with 2 accelerometers in it. + */ + .dev_name = "BOSC0200:base", + .fwnode = client->dev.fwnode, + .irq = -ENOENT, + }; + struct i2c_client *second_dev; + + second_dev = i2c_acpi_new_device(&client->dev, 1, &board_info); + if (!IS_ERR(second_dev)) + bmc150_set_second_device(second_dev); + } +#endif + + return 0; } static int bmc150_accel_remove(struct i2c_client *client) { + struct i2c_client *second_dev = bmc150_get_second_device(client); + + i2c_unregister_device(second_dev); + return bmc150_accel_core_remove(&client->dev); } diff --git a/drivers/iio/accel/bmc150-accel.h b/drivers/iio/accel/bmc150-accel.h index ae6118ae11b1d..6e965a3ca3226 100644 --- a/drivers/iio/accel/bmc150-accel.h +++ b/drivers/iio/accel/bmc150-accel.h @@ -16,6 +16,8 @@ enum { int bmc150_accel_core_probe(struct device *dev, struct regmap *regmap, int irq, const char *name, bool block_supported); int bmc150_accel_core_remove(struct device *dev); +struct i2c_client *bmc150_get_second_device(struct i2c_client *second_device); +void bmc150_set_second_device(struct i2c_client *second_device); extern const struct dev_pm_ops bmc150_accel_pm_ops; extern const struct regmap_config bmc150_regmap_conf; -- 2.27.0
