From: Krzysztof Kozlowski <k...@kernel.org>
commit bd7e7ff56feea7810df900fb09c9741d259861d9 upstream.
On Odroid XU LDO12 and LDO15 supplies the power to USB 3.0 blocks but
the GPK GPIO pins are supplied by LDO7 (VDDQ_LCD). LDO7 also supplies
GPJ GPIO pins.
The Exynos pinctrl driver does not take any supplies, so to have entire
GPIO block always available, make the regulator always on.
Fixes: 88644b4c750b ("ARM: dts: exynos: Configure PWM, usb3503, PMIC and
thermal on Odroid XU board")
Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>
Cc: <sta...@vger.kernel.org>
Link: https://lore.kernel.org/r/20201015182044.480562-3-k...@kernel.org
Tested-by: Gabriel Ribba Esteva <gabriel.rib...@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
arch/arm/boot/dts/exynos5410-odroidxu.dts | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -324,6 +324,8 @@
regulator-name = "vddq_lcd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ /* Supplies also GPK and GPJ */
+ regulator-always-on;
};
ldo8_reg: LDO8 {
