When we set bit 10 high we use continuous mode and not single mode. Let's correct this to avoid confusion. No functional changes here, the code does the right thing with bit 10.
Cc: Adam Ford <[email protected]> Cc: Carl Philipp Klemm <[email protected]> Cc: Eduardo Valentin <[email protected]> Cc: Merlijn Wajer <[email protected]> Cc: Pavel Machek <[email protected]> Cc: Peter Ujfalusi <[email protected]> Cc: Sebastian Reichel <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> --- drivers/thermal/ti-soc-thermal/omap4-thermal-data.c | 4 ++-- drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c --- a/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c +++ b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c @@ -24,7 +24,7 @@ omap4430_mpu_temp_sensor_registers = { .bgap_dtemp_mask = OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK, .bgap_mode_ctrl = OMAP4430_TEMP_SENSOR_CTRL_OFFSET, - .mode_ctrl_mask = OMAP4430_SINGLE_MODE_MASK, + .mode_ctrl_mask = OMAP4430_CONTINUOUS_MODE_MASK, .bgap_efuse = OMAP4430_FUSE_OPP_BGAP, }; @@ -97,7 +97,7 @@ omap4460_mpu_temp_sensor_registers = { .mask_cold_mask = OMAP4460_MASK_COLD_MASK, .bgap_mode_ctrl = OMAP4460_BGAP_CTRL_OFFSET, - .mode_ctrl_mask = OMAP4460_SINGLE_MODE_MASK, + .mode_ctrl_mask = OMAP4460_CONTINUOUS_MODE_MASK, .bgap_counter = OMAP4460_BGAP_COUNTER_OFFSET, .counter_mask = OMAP4460_COUNTER_MASK, diff --git a/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h --- a/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h +++ b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h @@ -40,7 +40,7 @@ /* OMAP4430.TEMP_SENSOR bits */ #define OMAP4430_BGAP_TEMPSOFF_MASK BIT(12) #define OMAP4430_BGAP_TSHUT_MASK BIT(11) -#define OMAP4430_SINGLE_MODE_MASK BIT(10) +#define OMAP4430_CONTINUOUS_MODE_MASK BIT(10) #define OMAP4430_BGAP_TEMP_SENSOR_SOC_MASK BIT(9) #define OMAP4430_BGAP_TEMP_SENSOR_EOCZ_MASK BIT(8) #define OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK (0xff << 0) @@ -113,7 +113,7 @@ #define OMAP4460_BGAP_TEMP_SENSOR_DTEMP_MASK (0x3ff << 0) /* OMAP4460.BANDGAP_CTRL bits */ -#define OMAP4460_SINGLE_MODE_MASK BIT(31) +#define OMAP4460_CONTINUOUS_MODE_MASK BIT(31) #define OMAP4460_MASK_HOT_MASK BIT(1) #define OMAP4460_MASK_COLD_MASK BIT(0) -- 2.29.2
