Hi,
Wesley Cheng <wch...@codeaurora.org> writes:
> +void composite_reset(struct usb_gadget *gadget)
> +{
> + /*
> + * Section 1.4.13 Standard Downstream Port of the USB battery charging
> + * specification v1.2 states that a device connected on a SDP shall only
> + * draw at max 100mA while in a connected, but unconfigured state.
The requirements are different, though. I think OTG spec has some extra
requirements where only 8mA can be drawn max. You need to check for the
otg flag. Moreover, USB3+ spec has units of 150mA meaning the device
can't draw 100mA (IIRC).
--
balbi
