Add qpic_bam node to support QPIC BAM DMA controller on SDX55 platform.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasi...@linaro.org>
Reviewed-by: Vinod Koul <vk...@kernel.org>
---
arch/arm/boot/dts/qcom-sdx55.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi
b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 5c091787c458..fde3a9da68e7 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -139,6 +139,18 @@ blsp1_uart3: serial@831000 {
status = "disabled";
};
+ qpic_bam: dma-controller@1b04000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x01b04000 0x1c000>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rpmhcc RPMH_QPIC_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ qcom,controlled-remotely;
+ status = "disabled";
+ };
+
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x01f40000 0x40000>;
--
2.25.1
