On Wed, 6 Jan 2021 11:14:36 +0100 Maxime Ripard <max...@cerno.tech> wrote:
> Hi, > > On Wed, Dec 23, 2020 at 03:49:19PM -0700, Rob Herring wrote: > > On Wed, Dec 23, 2020 at 4:34 AM Wilken Gottwalt > > <wilken.gottw...@posteo.net> wrote: > > > > > > Adds documentation on how to use the sun6i_hwspinlock driver for sun6i > > > compatible SoCs. > > > > Please resend to DT list so that automated checks run and it's in my > > queue (PW). You need to run 'make dt_binding_check' as there are > > several issues. > > > > > Signed-off-by: Wilken Gottwalt <wilken.gottw...@posteo.net> > > > --- > > > Changes in v5: > > > - changed binding to earliest known supported SoC sun6i-a31 > > > - dropped unnecessary entries > > > > > > Changes in v4: > > > - changed binding to sun8i-a33-hwpinlock > > > - added changes suggested by Maxime Ripard > > > > > > Changes in v3: > > > - changed symbols from sunxi to sun8i > > > > > > Changes in v2: > > > - fixed memory ranges > > > --- > > > .../bindings/hwlock/sun6i-a31-hwspinlock.yaml | 44 +++++++++++++++++++ > > > 1 file changed, 44 insertions(+) > > > create mode 100644 > > > Documentation/devicetree/bindings/hwlock/sun6i-a31-hwspinlock.yaml > > > > > > diff --git > > > a/Documentation/devicetree/bindings/hwlock/sun6i-a31-hwspinlock.yaml > > > b/Documentation/devicetree/bindings/hwlock/sun6i-a31-hwspinlock.yaml new > > > file mode 100644 > > > index 000000000000..481c5c995ad7 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/hwlock/sun6i-a31-hwspinlock.yaml > > > @@ -0,0 +1,44 @@ > > > +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause) > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/hwlock/sun6i-hwspinlock.yaml# > > > > This will fail checks. Wrong filename. > > Also, the name should be the whole compatible, so > "allwinner,sun6i-a31-hwspinlock.yaml". Yes, I mixed it up a bit. I was a bit to tired this day. And changing the names/symbols in the last minute didn't go well either. > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: SUN6I hardware spinlock driver for Allwinner sun6i compatible SoCs > > > + > > > +maintainers: > > > + - Wilken Gottwalt <wilken.gottw...@posteo.net> > > > + > > > +description: > > > + The hardware unit provides semaphores between the ARM cores and the > > > embedded > > > + companion core on the SoC. > > > + > > > +properties: > > > + compatible: > > > + const: allwinner,sun6i-a31-hwspinlock > > > + > > > + reg: > > > + maxItems: 1 > > > + > > > + clocks: > > > + maxItems: 1 > > > + > > > + resets: > > > + maxItems: 1 > > And this is not indented properly, it should be at the same level than > compatible, not under it. Doesn't the meta-schema catch this? Hmm, yeah, this is odd. I need to check my scripts. The bindings stuff is clearly not checked. > Maxime