Hi Kevin Paul,

On Tue, Dec 22, 2020 at 11:48:50AM -0800, Kevin Paul Herbert wrote:
> Only the Layerscape SoCs have interrupts on bus idle, which facilitate
> sending events which complete slave bus transactions.
> 
> Add support for synthesizing missing events. If we see a master request,
> or a newly addressed slave request, if the last event sent to the backend
> was I2C_SLAVE_READ_REQUESTED, send the backend a I2C_SLAVE_READ_PROCESSED
> followed by I2C_SLAVE_STOP. For all other events, send an I2C_SLAVE_STOP.
> 
> Signed-off-by: Kevin Paul Herbert <[email protected]>
> ---
>  drivers/i2c/busses/i2c-imx.c | 59 +++++++++++++++++++++++++++++++-----
>  1 file changed, 52 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
> index b444fbf1a262..b3e2a6a7fc19 100644
> --- a/drivers/i2c/busses/i2c-imx.c
> +++ b/drivers/i2c/busses/i2c-imx.c
> @@ -209,6 +209,7 @@ struct imx_i2c_struct {
>  
>       struct imx_i2c_dma      *dma;
>       struct i2c_client       *slave;
> +     enum i2c_slave_event last_slave_event;
>  };
>  
>  static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
> @@ -662,6 +663,36 @@ static void i2c_imx_enable_bus_idle(struct 
> imx_i2c_struct *i2c_imx)
>       }
>  }
>  
> +static void i2c_imx_slave_event(struct imx_i2c_struct *i2c_imx,
> +                             enum i2c_slave_event event, u8 *val)
> +{
> +     i2c_slave_event(i2c_imx->slave, event, val);
> +     i2c_imx->last_slave_event = event;
> +}
> +
> +static void i2c_imx_slave_finish_op(struct imx_i2c_struct *i2c_imx)
> +{
> +     u8 val;
> +
> +     while (i2c_imx->last_slave_event != I2C_SLAVE_STOP) {
> +             switch (i2c_imx->last_slave_event) {
> +             case I2C_SLAVE_READ_REQUESTED:
> +                     i2c_imx_slave_event(i2c_imx, I2C_SLAVE_READ_PROCESSED,
> +                                         &val);
> +                     break;
> +
> +             case I2C_SLAVE_WRITE_REQUESTED:
> +             case I2C_SLAVE_READ_PROCESSED:
> +             case I2C_SLAVE_WRITE_RECEIVED:
> +                     i2c_imx_slave_event(i2c_imx, I2C_SLAVE_STOP, &val);
> +                     break;
> +
> +             case I2C_SLAVE_STOP:
> +                     break;
> +             }
> +     }
> +}

Is it really working code?

The i2c_imx_slave_finish_op() is a waiting busy loop withing an IRQ! And
it is waiting for an event, which is updated in the same IRQ callback.
Or am i missing some thing?

Regards,
Oleksij

>  static irqreturn_t i2c_imx_slave_isr(struct imx_i2c_struct *i2c_imx,
>                                    unsigned int status, unsigned int ctl)
>  {
> @@ -674,9 +705,11 @@ static irqreturn_t i2c_imx_slave_isr(struct 
> imx_i2c_struct *i2c_imx,
>       }
>  
>       if (status & I2SR_IAAS) { /* Addressed as a slave */
> +             i2c_imx_slave_finish_op(i2c_imx);
>               if (status & I2SR_SRW) { /* Master wants to read from us*/
>                       dev_dbg(&i2c_imx->adapter.dev, "read requested");
> -                     i2c_slave_event(i2c_imx->slave, 
> I2C_SLAVE_READ_REQUESTED, &value);
> +                     i2c_imx_slave_event(i2c_imx,
> +                                         I2C_SLAVE_READ_REQUESTED, &value);
>  
>                       /* Slave transmit */
>                       ctl |= I2CR_MTX;
> @@ -686,7 +719,8 @@ static irqreturn_t i2c_imx_slave_isr(struct 
> imx_i2c_struct *i2c_imx,
>                       imx_i2c_write_reg(value, i2c_imx, IMX_I2C_I2DR);
>               } else { /* Master wants to write to us */
>                       dev_dbg(&i2c_imx->adapter.dev, "write requested");
> -                     i2c_slave_event(i2c_imx->slave, 
> I2C_SLAVE_WRITE_REQUESTED, &value);
> +                     i2c_imx_slave_event(i2c_imx,
> +                                         I2C_SLAVE_WRITE_REQUESTED, &value);
>  
>                       /* Slave receive */
>                       ctl &= ~I2CR_MTX;
> @@ -697,17 +731,20 @@ static irqreturn_t i2c_imx_slave_isr(struct 
> imx_i2c_struct *i2c_imx,
>       } else if (!(ctl & I2CR_MTX)) { /* Receive mode */
>               if (status & I2SR_IBB) { /* No STOP signal detected */
>                       value = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
> -                     i2c_slave_event(i2c_imx->slave, 
> I2C_SLAVE_WRITE_RECEIVED, &value);
> +                     i2c_imx_slave_event(i2c_imx,
> +                                         I2C_SLAVE_WRITE_RECEIVED, &value);
>               } else { /* STOP signal is detected */
>                       dev_dbg(&i2c_imx->adapter.dev,
>                               "STOP signal detected");
> -                     i2c_slave_event(i2c_imx->slave, I2C_SLAVE_STOP, &value);
> +                     i2c_imx_slave_event(i2c_imx,
> +                                         I2C_SLAVE_STOP, &value);
>               }
>       } else if (!(status & I2SR_RXAK)) { /* Transmit mode received ACK */
>               ctl |= I2CR_MTX;
>               imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
>  
> -             i2c_slave_event(i2c_imx->slave, I2C_SLAVE_READ_PROCESSED, 
> &value);
> +             i2c_imx_slave_event(i2c_imx,
> +                                 I2C_SLAVE_READ_PROCESSED, &value);
>  
>               imx_i2c_write_reg(value, i2c_imx, IMX_I2C_I2DR);
>       } else { /* Transmit mode received NAK */
> @@ -748,6 +785,7 @@ static int i2c_imx_reg_slave(struct i2c_client *client)
>               return -EBUSY;
>  
>       i2c_imx->slave = client;
> +     i2c_imx->last_slave_event = I2C_SLAVE_STOP;
>  
>       /* Resume */
>       ret = pm_runtime_get_sync(i2c_imx->adapter.dev.parent);
> @@ -800,10 +838,17 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
>  
>       status = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
>       ctl = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
> +
>       if (status & I2SR_IIF) {
>               i2c_imx_clear_irq(i2c_imx, I2SR_IIF);
> -             if (i2c_imx->slave && !(ctl & I2CR_MSTA))
> -                     return i2c_imx_slave_isr(i2c_imx, status, ctl);
> +             if (i2c_imx->slave) {
> +                     if (!(ctl & I2CR_MSTA)) {
> +                             return i2c_imx_slave_isr(i2c_imx, status, ctl);
> +                     } else if (i2c_imx->last_slave_event !=
> +                                I2C_SLAVE_STOP) {
> +                             i2c_imx_slave_finish_op(i2c_imx);
> +                     }
> +             }
>               return i2c_imx_master_isr(i2c_imx, status);
>       }
>  
> -- 
> 2.25.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Reply via email to