The vhub engine has two dma mode, one is descriptor list, another
is single stage DMA. Each mode has different stop register setting.
Descriptor list operation (bit2) : 0 disable reset, 1: enable reset
Single mode operation (bit0) : 0 : disable, 1: enable
Signed-off-by: Ryan Chen <ryan_c...@aspeedtech.com>
---
drivers/usb/gadget/udc/aspeed-vhub/epn.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c
b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
index 0bd6b20435b8..02d8bfae58fb 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/epn.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
@@ -420,7 +420,10 @@ static void ast_vhub_stop_active_req(struct ast_vhub_ep
*ep,
u32 state, reg, loops;
/* Stop DMA activity */
- writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
+ if (ep->epn.desc_mode)
+ writel(VHUB_EP_DMA_CTRL_RESET, ep->epn.regs +
AST_VHUB_EP_DMA_CTLSTAT);
+ else
+ writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
/* Wait for it to complete */
for (loops = 0; loops < 1000; loops++) {
--
2.17.1
