Initial support for the Silergy SY7636A Power Management chip
driver.
Signed-off-by: Alistair Francis <alist...@alistair23.me>
---
drivers/mfd/Kconfig | 10 ++
drivers/mfd/Makefile | 2 +
drivers/mfd/sy7636a.c | 252 ++++++++++++++++++++++++++++++++++++
include/linux/mfd/sy7636a.h | 50 +++++++
4 files changed, 314 insertions(+)
create mode 100644 drivers/mfd/sy7636a.c
create mode 100644 include/linux/mfd/sy7636a.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index bdfce7b15621..c8c62d92433c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1360,6 +1360,16 @@ config MFD_SYSCON
Select this option to enable accessing system control registers
via regmap.
+config MFD_SY7636A
+ tristate "Silergy SY7636A Power Management chip driver"
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ depends on I2C=y
+ help
+ Select this option to enable support for the Silergy SY7636A
+ Power Management chip driver.
+
config MFD_DAVINCI_VOICECODEC
tristate
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 14fdb188af02..1fa1e635f506 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -265,6 +265,8 @@ obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o
obj-$(CONFIG_MFD_STMFX) += stmfx.o
obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o
+obj-$(CONFIG_MFD_SY7636A) += sy7636a.o
+
obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
diff --git a/drivers/mfd/sy7636a.c b/drivers/mfd/sy7636a.c
new file mode 100644
index 000000000000..39aac965d854
--- /dev/null
+++ b/drivers/mfd/sy7636a.c
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * MFD driver for SY7636A chip
+ *
+ * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+ *
+ * Author: Lars Ivar Miljeteig <lars.ivar.miljet...@remarkable.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Based on the lp87565 driver by Keerthy <j-keer...@ti.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/sysfs.h>
+
+#include <linux/mfd/sy7636a.h>
+
+static const struct regmap_config sy7636a_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static const struct mfd_cell sy7636a_cells[] = {
+ { .name = "sy7636a-regulator", },
+ { .name = "sy7636a-temperature", },
+ { .name = "sy7636a-thermal", },
+};
+
+static const struct of_device_id of_sy7636a_match_table[] = {
+ { .compatible = "silergy,sy7636a", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, of_sy7636a_match_table);
+
+static const char * const states[] = {
+ "no fault event",
+ "UVP at VP rail",
+ "UVP at VN rail",
+ "UVP at VPOS rail",
+ "UVP at VNEG rail",
+ "UVP at VDDH rail",
+ "UVP at VEE rail",
+ "SCP at VP rail",
+ "SCP at VN rail",
+ "SCP at VPOS rail",
+ "SCP at VNEG rail",
+ "SCP at VDDH rail",
+ "SCP at VEE rail",
+ "SCP at V COM rail",
+ "UVLO",
+ "Thermal shutdown",
+};
+
+int get_vcom_voltage_mv(struct regmap *regmap)
+{
+ int ret;
+ unsigned int val, val_h;
+
+ ret = regmap_read(regmap, SY7636A_REG_VCOM_ADJUST_CTRL_L, &val);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(regmap, SY7636A_REG_VCOM_ADJUST_CTRL_H, &val_h);
+ if (ret)
+ return ret;
+
+ val |= (val_h << 8);
+
+ return (val & 0x1FF) * 10;
+}
+
+int set_vcom_voltage_mv(struct regmap *regmap, unsigned int vcom)
+{
+ int ret;
+ unsigned int val;
+
+ if (vcom < 0 || vcom > 5000)
+ return -EINVAL;
+
+ val = (unsigned int)(vcom / 10) & 0x1ff;
+
+ ret = regmap_write(regmap, SY7636A_REG_VCOM_ADJUST_CTRL_L, val);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(regmap, SY7636A_REG_VCOM_ADJUST_CTRL_H, val >> 8);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static ssize_t state_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ unsigned int val;
+ struct sy7636a *sy7636a = dev_get_drvdata(dev);
+
+ ret = regmap_read(sy7636a->regmap, SY7636A_REG_FAULT_FLAG, &val);
+ if (ret) {
+ dev_err(sy7636a->dev, "Failed to read from device\n");
+ return ret;
+ }
+
+ val = val >> 1;
+
+ if (val >= ARRAY_SIZE(states)) {
+ dev_err(sy7636a->dev, "Unexpected value read from device:
%u\n", val);
+ return -EINVAL;
+ }
+
+ return snprintf(buf, PAGE_SIZE, "%s\n", states[val]);
+}
+static DEVICE_ATTR(state, 0444, state_show, NULL);
+
+static ssize_t power_good_show(struct device *dev, struct device_attribute
*attr,
+ char *buf)
+{
+ int ret;
+ unsigned int val;
+ struct sy7636a *sy7636a = dev_get_drvdata(dev);
+
+ ret = regmap_read(sy7636a->regmap, SY7636A_REG_FAULT_FLAG, &val);
+ if (ret) {
+ dev_err(sy7636a->dev, "Failed to read from device\n");
+ return ret;
+ }
+
+ val &= 0x01;
+
+ return snprintf(buf, PAGE_SIZE, "%s\n", val ? "ON" : "OFF");
+}
+static DEVICE_ATTR(power_good, 0444, power_good_show, NULL);
+
+static ssize_t vcom_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ struct sy7636a *sy7636a = dev_get_drvdata(dev);
+
+ ret = get_vcom_voltage_mv(sy7636a->regmap);
+ if (ret < 0)
+ return ret;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", -ret);
+}
+
+static ssize_t vcom_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ int ret;
+ int vcom;
+ struct sy7636a *sy7636a = dev_get_drvdata(dev);
+
+ ret = kstrtoint(buf, 0, &vcom);
+ if (ret)
+ return ret;
+
+ if (vcom > 0 || vcom < -5000)
+ return -EINVAL;
+
+ ret = set_vcom_voltage_mv(sy7636a->regmap, (unsigned int)(-vcom));
+ if (ret)
+ return ret;
+
+ return count;
+}
+static DEVICE_ATTR(vcom, 0644, vcom_show, vcom_store);
+
+static struct attribute *sy7636a_sysfs_attrs[] = {
+ &dev_attr_state.attr,
+ &dev_attr_power_good.attr,
+ &dev_attr_vcom.attr,
+ NULL,
+};
+
+static const struct attribute_group sy7636a_sysfs_attr_group = {
+ .attrs = sy7636a_sysfs_attrs,
+};
+
+static int sy7636a_probe(struct i2c_client *client,
+ const struct i2c_device_id *ids)
+{
+ struct sy7636a *sy7636a;
+ int ret;
+
+ sy7636a = devm_kzalloc(&client->dev, sizeof(struct sy7636a),
GFP_KERNEL);
+ if (sy7636a == NULL)
+ return -ENOMEM;
+
+ sy7636a->dev = &client->dev;
+
+ sy7636a->regmap = devm_regmap_init_i2c(client, &sy7636a_regmap_config);
+ if (IS_ERR(sy7636a->regmap)) {
+ ret = PTR_ERR(sy7636a->regmap);
+ dev_err(sy7636a->dev,
+ "Failed to initialize register map: %d\n", ret);
+ return ret;
+ }
+
+ i2c_set_clientdata(client, sy7636a);
+
+ ret = sysfs_create_group(&client->dev.kobj, &sy7636a_sysfs_attr_group);
+ if (ret) {
+ dev_err(sy7636a->dev, "Failed to create sysfs attributes\n");
+ return ret;
+ }
+
+ ret = devm_mfd_add_devices(sy7636a->dev, PLATFORM_DEVID_AUTO,
+ sy7636a_cells,
ARRAY_SIZE(sy7636a_cells),
+ NULL, 0, NULL);
+ if (ret) {
+ dev_err(sy7636a->dev, "Failed to add mfd devices\n");
+ sysfs_remove_group(&client->dev.kobj,
&sy7636a_sysfs_attr_group);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id sy7636a_id_table[] = {
+ { "sy7636a", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, sy7636a_id_table);
+
+static struct i2c_driver sy7636a_driver = {
+ .driver = {
+ .name = "sy7636a",
+ .of_match_table = of_sy7636a_match_table,
+ },
+ .probe = sy7636a_probe,
+ .id_table = sy7636a_id_table,
+};
+module_i2c_driver(sy7636a_driver);
+
+MODULE_AUTHOR("Lars Ivar Miljeteig <lars.ivar.miljet...@remarkable.com>");
+MODULE_DESCRIPTION("Silergy SY7636A Multi-Function Device Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/sy7636a.h b/include/linux/mfd/sy7636a.h
new file mode 100644
index 000000000000..642789c4d0a9
--- /dev/null
+++ b/include/linux/mfd/sy7636a.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Functions to access SY3686A power management chip.
+ *
+ * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_MFD_SY7636A_H
+#define __LINUX_MFD_SY7636A_H
+
+#include <linux/i2c.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regmap.h>
+
+#define SY7636A_REG_OPERATION_MODE_CRL 0x00
+#define SY7636A_OPERATION_MODE_CRL_VCOMCTL (1 << 6)
+#define SY7636A_OPERATION_MODE_CRL_ONOFF (1 << 7)
+#define SY7636A_REG_VCOM_ADJUST_CTRL_L 0x01
+#define SY7636A_REG_VCOM_ADJUST_CTRL_H 0x02
+#define SY7636A_REG_VCOM_ADJUST_CTRL_MASK 0x01ff
+#define SY7636A_REG_VLDO_VOLTAGE_ADJULST_CTRL 0x03
+#define SY7636A_REG_POWER_ON_DELAY_TIME 0x06
+#define SY7636A_REG_FAULT_FLAG 0x07
+#define SY7636A_FAULT_FLAG_PG (1 << 0)
+#define SY7636A_REG_TERMISTOR_READOUT 0x08
+
+#define SY7636A_REG_MAX 0x08
+
+struct sy7636a {
+ struct device *dev;
+ struct regmap *regmap;
+ unsigned int vcom;
+ struct gpio_desc *pgood_gpio;
+ struct mutex reglock;
+};
+
+int get_vcom_voltage_mv(struct regmap *regmap);
+int set_vcom_voltage_mv(struct regmap *regmap, unsigned int vcom);
+
+#endif /* __LINUX_MFD_SY7636A_H */
--
2.29.2
