Initial support for the Silergy SY7636A-regulator Power Management chip
driver.
Signed-off-by: Alistair Francis <alist...@alistair23.me>
---
drivers/regulator/Kconfig | 6 +
drivers/regulator/Makefile | 1 +
drivers/regulator/sy7636a-regulator.c | 233 ++++++++++++++++++++++++++
3 files changed, 240 insertions(+)
create mode 100644 drivers/regulator/sy7636a-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 5abdd29fb9f3..76510a0db4f9 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1097,6 +1097,12 @@ config REGULATOR_STW481X_VMMC
This driver supports the internal VMMC regulator in the STw481x
PMIC chips.
+config REGULATOR_SY7636A
+ tristate "Silergy SY7636A voltage regulator"
+ depends on MFD_SY7636A
+ help
+ This driver supports Silergy SY3686A voltage regulator.
+
config REGULATOR_SY8106A
tristate "Silergy SY8106A regulator"
depends on I2C && (OF || COMPILE_TEST)
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 680e539f6579..fe05347cbf84 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -131,6 +131,7 @@ obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o
obj-$(CONFIG_REGULATOR_STPMIC1) += stpmic1_regulator.o
obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
+obj-$(CONFIG_REGULATOR_SY7636A) += sy7636a-regulator.o
obj-$(CONFIG_REGULATOR_SY8106A) += sy8106a-regulator.o
obj-$(CONFIG_REGULATOR_SY8824X) += sy8824x.o
obj-$(CONFIG_REGULATOR_SY8827N) += sy8827n.o
diff --git a/drivers/regulator/sy7636a-regulator.c
b/drivers/regulator/sy7636a-regulator.c
new file mode 100644
index 000000000000..a639830298d6
--- /dev/null
+++ b/drivers/regulator/sy7636a-regulator.c
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Functions to access SY3686A power management chip voltages
+ *
+ * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
+ *
+ * Author: Lars Ivar Miljeteig <lars.ivar.miljet...@remarkable.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/gpio/consumer.h>
+
+#include <linux/mfd/sy7636a.h>
+
+static int get_vcom_voltage_op(struct regulator_dev *rdev)
+{
+ int ret = get_vcom_voltage_mv(rdev->regmap);
+
+ if (ret < 0)
+ return ret;
+
+ return ret * 1000;
+}
+
+static int disable_regulator(struct regulator_dev *rdev)
+{
+ struct sy7636a *sy7636a = dev_get_drvdata(rdev->dev.parent);
+ int ret = 0;
+
+ mutex_lock(&sy7636a->reglock);
+ ret = regulator_disable_regmap(rdev);
+ usleep_range(30000, 35000);
+ mutex_unlock(&sy7636a->reglock);
+
+ return ret;
+}
+
+static int sy7636a_regulator_is_enabled(struct regulator_dev *rdev)
+{
+ struct sy7636a *sy7636a = dev_get_drvdata(rdev->dev.parent);
+ int ret;
+
+ mutex_lock(&sy7636a->reglock);
+ ret = regulator_is_enabled_regmap(rdev);
+ mutex_unlock(&sy7636a->reglock);
+
+ return ret;
+}
+
+static int enable_regulator_pgood(struct regulator_dev *rdev)
+{
+ struct sy7636a *sy7636a = dev_get_drvdata(rdev->dev.parent);
+ int pwr_good = 0;
+ int ret = 0;
+ unsigned long t0, t1;
+ const unsigned int wait_time = 500;
+ unsigned int wait_cnt;
+
+ t0 = jiffies;
+
+ mutex_lock(&sy7636a->reglock);
+
+ ret = regulator_enable_regmap(rdev);
+ if (ret)
+ goto finish;
+
+ for (wait_cnt = 0; wait_cnt < wait_time; wait_cnt++) {
+ pwr_good = gpiod_get_value_cansleep(sy7636a->pgood_gpio);
+ if (pwr_good < 0) {
+ dev_err(&rdev->dev, "Failed to read pgood gpio: %d\n",
pwr_good);
+ ret = pwr_good;
+ goto finish;
+ } else if (pwr_good)
+ break;
+
+ usleep_range(1000, 1500);
+ }
+
+ t1 = jiffies;
+
+ if (!pwr_good) {
+ dev_err(&rdev->dev, "Power good signal timeout after %u ms\n",
+ jiffies_to_msecs(t1 - t0));
+ ret = -ETIME;
+ goto finish;
+ }
+
+ dev_dbg(&rdev->dev, "Power good OK (took %u ms, %u waits)\n",
+ jiffies_to_msecs(t1 - t0),
+ wait_cnt);
+
+finish:
+ mutex_unlock(&sy7636a->reglock);
+ return ret;
+}
+
+static const struct regulator_ops sy7636a_vcom_volt_ops = {
+ .get_voltage = get_vcom_voltage_op,
+ .enable = enable_regulator_pgood,
+ .disable = disable_regulator,
+ .is_enabled = sy7636a_regulator_is_enabled,
+};
+
+struct regulator_desc desc = {
+ .name = "vcom",
+ .id = 0,
+ .ops = &sy7636a_vcom_volt_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = SY7636A_REG_OPERATION_MODE_CRL,
+ .enable_mask = SY7636A_OPERATION_MODE_CRL_ONOFF,
+ .regulators_node = of_match_ptr("regulators"),
+ .of_match = of_match_ptr("vcom"),
+};
+
+static int sy7636a_regulator_init(struct sy7636a *sy7636a)
+{
+ return regmap_write(sy7636a->regmap,
+ SY7636A_REG_POWER_ON_DELAY_TIME,
+ 0x0);
+}
+
+static int sy7636a_regulator_suspend(struct device *dev)
+{
+ int ret;
+ struct sy7636a *sy7636a = dev_get_drvdata(dev->parent);
+
+ ret = get_vcom_voltage_mv(sy7636a->regmap);
+
+ if (ret > 0)
+ sy7636a->vcom = (unsigned int)ret;
+
+ return 0;
+}
+
+static int sy7636a_regulator_resume(struct device *dev)
+{
+ int ret;
+
+ struct sy7636a *sy7636a = dev_get_drvdata(dev->parent);
+
+ if (!sy7636a->vcom || sy7636a->vcom > 5000) {
+ dev_warn(dev, "Vcom value invalid, and thus not restored\n");
+ } else {
+ ret = set_vcom_voltage_mv(sy7636a->regmap, sy7636a->vcom);
+ if (ret)
+ return ret;
+ }
+
+ return sy7636a_regulator_init(sy7636a);
+}
+
+static int sy7636a_regulator_probe(struct platform_device *pdev)
+{
+ struct sy7636a *sy7636a = dev_get_drvdata(pdev->dev.parent);
+ struct regulator_config config = { };
+ struct regulator_dev *rdev;
+ struct gpio_desc *gdp;
+ int ret;
+
+ if (!sy7636a)
+ return -EPROBE_DEFER;
+
+ platform_set_drvdata(pdev, sy7636a);
+
+ mutex_init(&sy7636a->reglock);
+
+ gdp = devm_gpiod_get(sy7636a->dev, "epd-pwr-good", GPIOD_IN);
+ if (IS_ERR(gdp)) {
+ dev_err(sy7636a->dev, "Power good GPIO fault %ld\n",
PTR_ERR(gdp));
+ return PTR_ERR(gdp);
+ }
+
+ sy7636a->pgood_gpio = gdp;
+ dev_info(sy7636a->dev,
+ "Power good GPIO registered (gpio# %d)\n",
+ desc_to_gpio(sy7636a->pgood_gpio));
+
+ ret = sy7636a_regulator_init(sy7636a);
+ if (ret) {
+ dev_err(sy7636a->dev, "Failed to initialize regulator: %d\n",
ret);
+ return ret;
+ }
+
+ config.dev = &pdev->dev;
+ config.dev->of_node = sy7636a->dev->of_node;
+ config.driver_data = sy7636a;
+ config.regmap = sy7636a->regmap;
+
+ rdev = devm_regulator_register(&pdev->dev, &desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(sy7636a->dev, "Failed to register %s regulator\n",
+ pdev->name);
+ return PTR_ERR(rdev);
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id sy7636a_regulator_id_table[] = {
+ { "sy7636a-regulator", },
+};
+MODULE_DEVICE_TABLE(platform, sy7636a_regulator_id_table);
+
+static const struct dev_pm_ops sy7636a_pm_ops = {
+ .suspend = sy7636a_regulator_suspend,
+ .resume = sy7636a_regulator_resume,
+};
+
+static struct platform_driver sy7636a_regulator_driver = {
+ .driver = {
+ .name = "sy7636a-regulator",
+ .pm = &sy7636a_pm_ops,
+ },
+ .probe = sy7636a_regulator_probe,
+ .id_table = sy7636a_regulator_id_table,
+};
+module_platform_driver(sy7636a_regulator_driver);
+
+MODULE_AUTHOR("Lars Ivar Miljeteig <lars.ivar.miljet...@remarkable.com>");
+MODULE_DESCRIPTION("SY7636A voltage regulator driver");
+MODULE_LICENSE("GPL v2");
--
2.29.2
