Takashi Iwai wrote:
> On Sat, 23 Jan 2021 12:08:02 +0100,
> Jamie Heilman wrote:
> >
> > > If the problem is still seen with the very latest Linus tree and the
> > > previous patch, please enable the dyndbg, e.g. pass dydbg=+p option to
> > > snd-usb-audio module, i.e. reload like
> > > modprobe snd-usb-audio dydbg=+p
> > > or boot with
> > > snd_usb_audio.dyndbg=+p
> > > boot option, retest, and give the kernel messages.
> >
> > OK, updated to 5.11.0-rc4-00202-gfe75a21824e7, repatched & rebuilt with:
> > CONFIG_SND_DEBUG=y
> > CONFIG_SND_CTL_VALIDATION=y
> > CONFIG_DYNAMIC_DEBUG=y
> > CONFIG_DYNAMIC_DEBUG_CORE=y
> >
> > and added dyndbg=+p to my snd-usb-audio options, dmesg after an
> > attempted aplay execution is attached.
> (snip)
> > [ 108.941521] WARNING: CPU: 0 PID: 2776 at sound/core/pcm_lib.c:1148
> > snd_pcm_hw_rule_add+0xd3/0x160 [snd_pcm]
>
> OK, this must be the culprit of the weird behavior.
> I totally overlooked that the max dependencies are three because of
> the terminator.
>
> Could you try the patch below in addition?
Yep, this works now, thanks! FWIW, here's what the debug output looks
like when its working, and I start jack now:
usb 1-1.1.2: 1:1: found sync_ep=0x81, iface=1, alt=1, implicit_fb=0
usb 1-1.1.2: 1:1: add audio endpoint 0x1
usb 1-1.1.2: Creating new data endpoint #1
usb 1-1.1.2: Creating new sync endpoint #81
usb 1-1.1.2: 1:1 Set sample rate 192000, clock 40
usb 1-1.1.2: [10] FU [M2Tech Audio 2.0 Output Playback Switch] ch = 2, val =
0/1/1
usb 1-1.1.2: [10] FU [M2Tech Audio 2.0 Output Playback Switch] ch = 1, val =
0/1/1
usb 1-1.1.2: RANGE setting not yet supported
usb 1-1.1.2: [10] FU [M2Tech Audio 2.0 Output Playback Volume] ch = 2, val =
-32512/0/256
usb 1-1.1.2: RANGE setting not yet supported
usb 1-1.1.2: [10] FU [M2Tech Audio 2.0 Output Playback Volume] ch = 1, val =
-32512/0/256
usb 1-1.1.2: Open EP 0x1, iface=1:1, idx=0
usb 1-1.1.2: channels=2, rate=96000, format=S32_LE, period_bytes=8192,
periods=3, implicit_fb=0
usb 1-1.1.2: Open EP 0x81, iface=1:1, idx=1
usb 1-1.1.2: channels=2, rate=96000, format=S32_LE, period_bytes=8192,
periods=3, implicit_fb=0
usb 1-1.1.2: Setting usb interface 1:0 for EP 0x1
usb 1-1.1.2: 1:1 Set sample rate 96000, clock 40
usb 1-1.1.2: Setting params for data EP 0x1, pipe 0x8600
usb 1-1.1.2: Set up 12 URBS, ret=0
usb 1-1.1.2: Setting usb interface 1:1 for EP 0x1
usb 1-1.1.2: Setting params for sync EP 0x81, pipe 0x8680
usb 1-1.1.2: Set up 4 URBS, ret=0
usb 1-1.1.2: Starting data EP 0x1 (running 0)
usb 1-1.1.2: 12 URBs submitted for EP 0x1
usb 1-1.1.2: Starting sync EP 0x81 (running 0)
usb 1-1.1.2: 4 URBs submitted for EP 0x81
usb 1-1.1.2: 1:1 Start Playback PCM
> --- a/include/sound/pcm.h
> +++ b/include/sound/pcm.h
> @@ -229,7 +229,7 @@ typedef int (*snd_pcm_hw_rule_func_t)(struct
> snd_pcm_hw_params *params,
> struct snd_pcm_hw_rule {
> unsigned int cond;
> int var;
> - int deps[4];
> + int deps[5];
>
> snd_pcm_hw_rule_func_t func;
> void *private;
--
Jamie Heilman http://audible.transient.net/~jamie/
