On Wed, Jan 13, 2021 at 01:51:00PM +0200, Jani Nikula wrote:
> On Wed, 13 Jan 2021, Koba Ko <koba...@canonical.com> wrote:
> > After read the link rate from MST hub, align with
> > maximum source rate.
> >
> > Signed-off-by: Koba Ko <koba...@canonical.com>
> > ---
> > drivers/gpu/drm/drm_dp_mst_topology.c | 8 ++++++++
> > drivers/gpu/drm/i915/display/intel_dp.c | 7 +++++++
> > include/drm/drm_dp_helper.h | 8 ++++++++
> > include/drm/drm_dp_mst_helper.h | 4 ++++
> > 4 files changed, 27 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c
> > b/drivers/gpu/drm/drm_dp_mst_topology.c
> > index 6982ecbf30b5..e7ceae97be85 100644
> > --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> > +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> > @@ -3672,6 +3672,10 @@ int drm_dp_mst_topology_mgr_set_mst(struct
> > drm_dp_mst_topology_mgr *mgr, bool ms
> > {
> > int ret = 0;
> > struct drm_dp_mst_branch *mstb = NULL;
> > + unsigned int max_link_rate_tbl[MAX_DRM_DP_MAX_RATE + 1] = {
> > + DP_LINK_BW_1_62, DP_LINK_BW_2_7, DP_LINK_BW_5_4,
> > + DP_LINK_BW_8_1, DP_LINK_RATE_TABLE
> > + };
>
> Please no. Read on for why.
>
> >
> > mutex_lock(&mgr->payload_lock);
> > mutex_lock(&mgr->lock);
> > @@ -3693,6 +3697,9 @@ int drm_dp_mst_topology_mgr_set_mst(struct
> > drm_dp_mst_topology_mgr *mgr, bool ms
> > goto out_unlock;
> > }
> >
> > + if (mgr->max_source_rate < MAX_DRM_DP_MAX_RATE)
> > + mgr->dpcd[1] = max_link_rate_tbl[mgr->max_source_rate];
>
> Make ->max_source_rate the actual physical rate in kHz, and use
> drm_dp_link_rate_to_bw_code() here.
>
> > +
> > mgr->pbn_div = drm_dp_get_vc_payload_bw(mgr->dpcd[1],
> > mgr->dpcd[2] &
> > DP_MAX_LANE_COUNT_MASK);
> > if (mgr->pbn_div == 0) {
> > @@ -5422,6 +5429,7 @@ int drm_dp_mst_topology_mgr_init(struct
> > drm_dp_mst_topology_mgr *mgr,
> > mgr->aux = aux;
> > mgr->max_dpcd_transaction_bytes = max_dpcd_transaction_bytes;
> > mgr->max_payloads = max_payloads;
> > + mgr->max_source_rate = MAX_DRM_DP_MAX_RATE;
> > mgr->conn_base_id = conn_base_id;
> > if (max_payloads + 1 > sizeof(mgr->payload_mask) * 8 ||
> > max_payloads + 1 > sizeof(mgr->vcpi_mask) * 8)
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> > b/drivers/gpu/drm/i915/display/intel_dp.c
> > index 469e765a1b7b..a89b4c823123 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -5392,6 +5392,13 @@ intel_dp_configure_mst(struct intel_dp *intel_dp)
> > intel_dp->is_mst = sink_can_mst &&
> > i915->params.enable_dp_mst;
> >
> > + if (intel_dp_source_supports_hbr3(intel_dp))
> > + intel_dp->mst_mgr.max_source_rate = DRM_DP_MAX_RATE_HBR3;
> > + else if (intel_dp_source_supports_hbr2(intel_dp))
> > + intel_dp->mst_mgr.max_source_rate = DRM_DP_MAX_RATE_HBR2;
> > + else
> > + intel_dp->mst_mgr.max_source_rate = DRM_DP_MAX_RATE_HBR;
>
> Whenever this file references a "rate", it's the rate in kHz. This is
> confusing. Use the rate in kHz.
>
> Also, please look at how intel_dp_source_supports_hbr* are implemented;
> we already have all the supported source rates cached in intel_dp.
>
> The max source rate is:
>
> intel_dp->source_rates[intel_dp->num_source_rates - 1].
>
> No need to do the if ladder here at all. If you like, you can add a
> helper:
>
> int intel_dp_max_source_rate(struct intel_dp *intel_dp)
> {
> return intel_dp->source_rates[intel_dp->num_source_rates - 1];
> }
Using the max source rate isn't super great either. A bit better
than the current mess though.
The correct fix would be to let the driver provide the actually
used link_rate+lane_count to the MST code during atomic_check(),
instead of trying to guess what the driver is going to use.
--
Ville Syrjälä
Intel
