Il 26/01/21 14:39, Stanimir Varbanov ha scritto:
On 1/13/21 8:38 PM, AngeloGioacchino Del Regno wrote:
From: Martin Botka <[email protected]>
Add a driver for the multimedia clock controller found on SDM660
based devices. This should allow most multimedia device drivers
to probe and control their clocks.
Signed-off-by: Martin Botka <[email protected]>
Co-developed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
[[email protected]: Cleaned up SDM630 clock fixups]
Signed-off-by: AngeloGioacchino Del Regno
<[email protected]>
---
drivers/clk/qcom/Kconfig | 9 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/mmcc-sdm660.c | 2864 ++++++++++++++++++
include/dt-bindings/clock/qcom,mmcc-sdm660.h | 162 +
4 files changed, 3036 insertions(+)
create mode 100644 drivers/clk/qcom/mmcc-sdm660.c
create mode 100644 include/dt-bindings/clock/qcom,mmcc-sdm660.h
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index d32bb12cd8d0..eb9746e84556 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -366,6 +366,15 @@ config SDM_GCC_660
Say Y if you want to use peripheral devices such as UART, SPI,
i2C, USB, UFS, SDDC, PCIe, etc.
+config SDM_MMCC_660
+ tristate "SDM660 Multimedia Clock Controller"
+ select SDM_GCC_660
+ select QCOM_GDSC
+ help
+ Support for the multimedia clock controller on SDM660 devices.
+ Say Y if you want to support multimedia devices such as display,
+ graphics, video encode/decode, camera, etc.
+
config QCS_TURING_404
tristate "QCS404 Turing Clock Controller"
help
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 9e5e0e3cb7b4..bfa8350f088d 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_SC_VIDEOCC_7180) += videocc-sc7180.o
obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o
obj-$(CONFIG_SDM_DISPCC_845) += dispcc-sdm845.o
obj-$(CONFIG_SDM_GCC_660) += gcc-sdm660.o
+obj-$(CONFIG_SDM_MMCC_660) += mmcc-sdm660.o
obj-$(CONFIG_SDM_GCC_845) += gcc-sdm845.o
obj-$(CONFIG_SDM_GPUCC_845) += gpucc-sdm845.o
obj-$(CONFIG_SDM_LPASSCC_845) += lpasscc-sdm845.o
diff --git a/drivers/clk/qcom/mmcc-sdm660.c b/drivers/clk/qcom/mmcc-sdm660.c
new file mode 100644
index 000000000000..d268e1c89f57
--- /dev/null
+++ b/drivers/clk/qcom/mmcc-sdm660.c
@@ -0,0 +1,2864 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020, Martin Botka <[email protected]>
+ * Copyright (c) 2020, Konrad Dybcio <[email protected]>
+ */
+
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+#include <linux/clk.h>
+
+
+#include <dt-bindings/clock/qcom,mmcc-sdm660.h>
+
+#include "common.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "clk-alpha-pll.h"
+#include "clk-rcg.h"
+#include "clk-branch.h"
+#include "reset.h"
+#include "gdsc.h"
+
<cut>
+
+static struct gdsc venus_gdsc = {
+ .gdscr = 0x1024,
+ .pd = {
+ .name = "venus",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc venus_core0_gdsc = {
+ .gdscr = 0x1040,
+ .pd = {
+ .name = "venus_core0",
+ },
+ .parent = &venus_gdsc.pd,
+ .pwrsts = PWRSTS_OFF_ON,
I think this gdsc should be under hw control?
+ .flags = HW_CTRL,
Feels strange, eh? Was the same for me, but then noupe, there is no
hw control for this GDSC downstream, nor a hw_ctrl address for it, so
on this SoC it shouldn't be under hw control.
Besides that, testing also agrees with this (enc/dec works)...
P.S.: Thanks for the review!
-- Angelo
+};
+
