On Mon, Jan 25, 2021 at 10:44:32AM +0100, Jonathan Albrieux wrote:
> BQ Aquaris X5 (Longcheer L8910) has:
> - BMI160 accelerometer and gyroscope sensor
> - AK09911 magnetometer sensor
> Add them to the device tree.
>
> This patch depends on patch "arm64: dts: qcom: msm8916: Add blsp_i2c3".
>
> Signed-off-by: Jonathan Albrieux <jonathan.albri...@gmail.com>
Reviewed-by: Stephan Gerhold <step...@gerhold.net>
> ---
> .../boot/dts/qcom/msm8916-longcheer-l8910.dts | 37 +++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
> b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
> index 7d5eff922f41..27845189ac2b 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts
> @@ -56,6 +56,35 @@
> };
> };
>
> +&blsp_i2c3 {
> + status = "okay";
> +
> + magnetometer@d {
> + compatible = "asahi-kasei,ak09911";
> + reg = <0x0d>;
> +
> + vdd-supply = <&pm8916_l17>;
> + vid-supply = <&pm8916_l6>;
> +
> + reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&mag_reset_default>;
> + };
> +
> + imu@68 {
> + compatible = "bosch,bmi160";
> + reg = <0x68>;
> +
> + vdd-supply = <&pm8916_l17>;
> + vddio-supply = <&pm8916_l6>;
> +
> + mount-matrix = "0", "1", "0",
> + "-1", "0", "0",
> + "0", "0", "1";
> + };
> +};
> +
> &blsp1_uart2 {
> status = "okay";
> };
> @@ -220,6 +249,14 @@
> bias-pull-up;
> };
>
> + mag_reset_default: mag-reset-default {
> + pins = "gpio111";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> usb_id_default: usb-id-default {
> pins = "gpio110";
> function = "gpio";
> --
> 2.17.1
>
