On Mon, Jan 25, 2021 at 02:56:28PM -0600, richard.g...@linux.intel.com wrote:
> From: Richard Gong <richard.g...@intel.com>
>
> Extend FPGA manager driver to support FPGA bitstream authentication on
> Intel SocFPGA platforms.
>
> Signed-off-by: Richard Gong <richard.g...@intel.com>
> ---
> v3: add handle to retriev the firmware version to keep driver
> back compatible
> v2: use flag defined in stratix10-svc driver
> ---
> drivers/fpga/stratix10-soc.c | 62
> +++++++++++++++++++++++++++++++++++++++-----
> 1 file changed, 56 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/fpga/stratix10-soc.c b/drivers/fpga/stratix10-soc.c
> index 657a70c..59d738c 100644
> --- a/drivers/fpga/stratix10-soc.c
> +++ b/drivers/fpga/stratix10-soc.c
> @@ -24,6 +24,10 @@
> #define S10_BUFFER_TIMEOUT (msecs_to_jiffies(SVC_RECONFIG_BUFFER_TIMEOUT_MS))
> #define S10_RECONFIG_TIMEOUT
> (msecs_to_jiffies(SVC_RECONFIG_REQUEST_TIMEOUT_MS))
>
> +#define INVALID_FIRMWARE_VERSION 0xFFFF
> +typedef void (*s10_callback)(struct stratix10_svc_client *client,
> + struct stratix10_svc_cb_data *data);
> +
> /*
> * struct s10_svc_buf
> * buf: virtual address of buf provided by service layer
> @@ -40,11 +44,13 @@ struct s10_priv {
> struct completion status_return_completion;
> struct s10_svc_buf svc_bufs[NUM_SVC_BUFS];
> unsigned long status;
> + unsigned int fw_version;
> };
>
> static int s10_svc_send_msg(struct s10_priv *priv,
> enum stratix10_svc_command_code command,
> - void *payload, u32 payload_length)
> + void *payload, u32 payload_length,
> + s10_callback callback)
> {
> struct stratix10_svc_chan *chan = priv->chan;
> struct device *dev = priv->client.dev;
> @@ -57,6 +63,7 @@ static int s10_svc_send_msg(struct s10_priv *priv,
> msg.command = command;
> msg.payload = payload;
> msg.payload_length = payload_length;
> + priv->client.receive_cb = callback;
>
> ret = stratix10_svc_send(chan, &msg);
> dev_dbg(dev, "stratix10_svc_send returned status %d\n", ret);
> @@ -134,6 +141,29 @@ static void s10_unlock_bufs(struct s10_priv *priv, void
> *kaddr)
> }
>
> /*
> + * s10_fw_version_callback - callback for the version of running firmware
> + * @client: service layer client struct
> + * @data: message from service layer
> + */
> +static void s10_fw_version_callback(struct stratix10_svc_client *client,
> + struct stratix10_svc_cb_data *data)
> +{
> + struct s10_priv *priv = client->priv;
> + unsigned int *version = (unsigned int *)data->kaddr1;
> +
> + if (data->status == BIT(SVC_STATUS_OK))
> + priv->fw_version = *version;
> + else if (data->status == BIT(SVC_STATUS_NO_SUPPORT))
> + dev_warn(client->dev,
> + "FW doesn't support bitstream authentication\n");
> + else
> + dev_err(client->dev, "Failed to get FW version %lu\n",
> + BIT(data->status));
> +
> + complete(&priv->status_return_completion);
> +}
> +
> +/*
> * s10_receive_callback - callback for service layer to use to provide client
> * (this driver) messages received through the mailbox.
> * client: service layer client struct
> @@ -186,13 +216,22 @@ static int s10_ops_write_init(struct fpga_manager *mgr,
> if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
> dev_dbg(dev, "Requesting partial reconfiguration.\n");
> ctype.flags |= BIT(COMMAND_RECONFIG_FLAG_PARTIAL);
> + } else if (info->flags & FPGA_MGR_BITSTREM_AUTHENTICATION) {
BITSTREAM ;-)
Nit: Maybe the flag could be FPGA_MGR_BITSTREAM_AUTHENTICATE and/or
FPGA_MGR_BITSTREAM_AUTH_AND_PERSIST.
> + if (priv->fw_version == INVALID_FIRMWARE_VERSION) {
> + dev_err(dev, "FW doesn't support\n");
> + return -EINVAL;
> + }
> +
> + dev_dbg(dev, "Requesting bitstream authentication.\n");
> + ctype.flags |= BIT(COMMAND_AUTHENTICATE_BITSTREAM);
> } else {
> dev_dbg(dev, "Requesting full reconfiguration.\n");
> }
>
> reinit_completion(&priv->status_return_completion);
> ret = s10_svc_send_msg(priv, COMMAND_RECONFIG,
> - &ctype, sizeof(ctype));
> + &ctype, sizeof(ctype),
> + s10_receive_callback);
> if (ret < 0)
> goto init_done;
>
> @@ -259,7 +298,7 @@ static int s10_send_buf(struct fpga_manager *mgr, const
> char *buf, size_t count)
> svc_buf = priv->svc_bufs[i].buf;
> memcpy(svc_buf, buf, xfer_sz);
> ret = s10_svc_send_msg(priv, COMMAND_RECONFIG_DATA_SUBMIT,
> - svc_buf, xfer_sz);
> + svc_buf, xfer_sz, s10_receive_callback);
> if (ret < 0) {
> dev_err(dev,
> "Error while sending data to service layer (%d)", ret);
> @@ -303,7 +342,7 @@ static int s10_ops_write(struct fpga_manager *mgr, const
> char *buf,
>
> ret = s10_svc_send_msg(
> priv, COMMAND_RECONFIG_DATA_CLAIM,
> - NULL, 0);
> + NULL, 0, s10_receive_callback);
> if (ret < 0)
> break;
> }
> @@ -357,7 +396,8 @@ static int s10_ops_write_complete(struct fpga_manager
> *mgr,
> do {
> reinit_completion(&priv->status_return_completion);
>
> - ret = s10_svc_send_msg(priv, COMMAND_RECONFIG_STATUS, NULL, 0);
> + ret = s10_svc_send_msg(priv, COMMAND_RECONFIG_STATUS,
> + NULL, 0, s10_receive_callback);
> if (ret < 0)
> break;
>
> @@ -411,8 +451,9 @@ static int s10_probe(struct platform_device *pdev)
> if (!priv)
> return -ENOMEM;
>
> + priv->fw_version = INVALID_FIRMWARE_VERSION;
> priv->client.dev = dev;
> - priv->client.receive_cb = s10_receive_callback;
> + priv->client.receive_cb = NULL;
> priv->client.priv = priv;
>
> priv->chan = stratix10_svc_request_channel_byname(&priv->client,
> @@ -440,6 +481,15 @@ static int s10_probe(struct platform_device *pdev)
> goto probe_err;
> }
>
> + /* get the running firmware version */
> + ret = s10_svc_send_msg(priv, COMMAND_FIRMWARE_VERSION,
> + NULL, 0, s10_fw_version_callback);
> + if (ret) {
> + dev_err(dev, "couldn't get firmware version\n");
> + fpga_mgr_free(mgr);
> + goto probe_err;
> + }
> +
> platform_set_drvdata(pdev, mgr);
> return ret;
>
> --
> 2.7.4
>
Thanks,
Moritz
