Enable the option necessary to boot mt8173-based boards to boot from usb devices, like its phy and the regulators needed to have proper support.
Signed-off-by: Enric Balletbo i Serra <enric.balle...@collabora.com> --- arch/arm64/configs/defconfig | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 01aa3eee90e8..30db9b50efaa 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -444,6 +444,7 @@ CONFIG_I2C_GPIO=m CONFIG_I2C_IMX=y CONFIG_I2C_IMX_LPI2C=y CONFIG_I2C_MESON=y +CONFIG_I2C_MT65XX=y CONFIG_I2C_MV64XXX=y CONFIG_I2C_OMAP=y CONFIG_I2C_OWL=y @@ -586,6 +587,7 @@ CONFIG_MFD_EXYNOS_LPASS=m CONFIG_MFD_HI6421_PMIC=y CONFIG_MFD_HI655X_PMIC=y CONFIG_MFD_MAX77620=y +CONFIG_MFD_MT6397=y CONFIG_MFD_SPMI_PMIC=y CONFIG_MFD_RK808=y CONFIG_MFD_SEC_CORE=y @@ -602,6 +604,8 @@ CONFIG_REGULATOR_HI6421V530=y CONFIG_REGULATOR_HI655X=y CONFIG_REGULATOR_MAX77620=y CONFIG_REGULATOR_MAX8973=y +CONFIG_REGULATOR_MT6358=y +CONFIG_REGULATOR_MT6397=y CONFIG_REGULATOR_PCA9450=y CONFIG_REGULATOR_PFUZE100=y CONFIG_REGULATOR_PWM=y @@ -765,6 +769,7 @@ CONFIG_USB_RENESAS_USBHS_HCD=m CONFIG_USB_RENESAS_USBHS=m CONFIG_USB_ACM=m CONFIG_USB_STORAGE=y +CONFIG_USB_MTU3=y CONFIG_USB_MUSB_HDRC=y CONFIG_USB_MUSB_SUNXI=y CONFIG_USB_DWC3=y @@ -958,6 +963,7 @@ CONFIG_OWL_PM_DOMAINS=y CONFIG_RASPBERRYPI_POWER=y CONFIG_FSL_DPAA=y CONFIG_FSL_MC_DPIO=y +CONFIG_MTK_PMIC_WRAP=y CONFIG_QCOM_AOSS_QMP=y CONFIG_QCOM_COMMAND_DB=y CONFIG_QCOM_GENI_SE=y @@ -1032,6 +1038,7 @@ CONFIG_PHY_HI6220_USB=y CONFIG_PHY_HISTB_COMBPHY=y CONFIG_PHY_HISI_INNO_USB2=y CONFIG_PHY_MVEBU_CP110_COMPHY=y +CONFIG_PHY_MTK_TPHY=y CONFIG_PHY_QCOM_QMP=m CONFIG_PHY_QCOM_QUSB2=m CONFIG_PHY_QCOM_USB_HS=y -- 2.30.0
