Add nodes for the onboard USB hub on trogdor devices. Remove the 'always-on' and 'boot-on' properties from the hub regulator, since the regulator is now managed by the onboard_usb_hub driver.
Signed-off-by: Matthias Kaehlcke <[email protected]> --- Changes in v5: - patch added to the series .../boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 15 ++++----------- .../boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 11 ++--------- arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 15 ++++----------- arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 18 +++++++++++++++--- 4 files changed, 25 insertions(+), 34 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts index 30e3e769d2b4..a557c269b998 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts @@ -14,17 +14,6 @@ / { compatible = "google,lazor-rev0", "qcom,sc7180"; }; -&pp3300_hub { - /* pp3300_l7c is used to power the USB hub */ - /delete-property/regulator-always-on; - /delete-property/regulator-boot-on; -}; - -&pp3300_l7c { - regulator-always-on; - regulator-boot-on; -}; - &sn65dsi86_out { /* * Lane 0 was incorrectly mapped on the cable, but we've now decided @@ -33,3 +22,7 @@ &sn65dsi86_out { */ lane-polarities = <1 0>; }; + +&usb_hub_2_0 { + vdd-supply = <&pp3300_l7c>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts index c2ef06367baf..d182b7a231f4 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts @@ -14,13 +14,6 @@ / { compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180"; }; -&pp3300_hub { - /* pp3300_l7c is used to power the USB hub */ - /delete-property/regulator-always-on; - /delete-property/regulator-boot-on; -}; - -&pp3300_l7c { - regulator-always-on; - regulator-boot-on; +&usb_hub_2_0 { + vdd-supply = <&pp3300_l7c>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts index 2cb522d6962e..699e7815697a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -53,21 +53,14 @@ ap_ts: touchscreen@10 { }; }; -&pp3300_hub { - /* pp3300_l7c is used to power the USB hub */ - /delete-property/regulator-always-on; - /delete-property/regulator-boot-on; -}; - -&pp3300_l7c { - regulator-always-on; - regulator-boot-on; -}; - &sdhc_2 { status = "okay"; }; +&usb_hub_2_0 { + vdd-supply = <&pp3300_l7c>; +}; + /* PINCTRL - board-specific pinctrl */ &tlmm { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 8ed7dd39f6e3..9add00cc32a5 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -203,9 +203,6 @@ pp3300_hub: pp3300-hub { pinctrl-names = "default"; pinctrl-0 = <&en_pp3300_hub>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&pp3300_a>; }; @@ -894,6 +891,21 @@ &usb_1 { &usb_1_dwc3 { dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + usb_hub_2_0: hub@1 { + compatible = "usbbda,5411"; + reg = <1>; + vdd-supply = <&pp3300_hub>; + }; + + /* 3.0 hub on port 2 */ + usb_hub_3_0: hub@2 { + compatible = "usbbda,411"; + reg = <2>; + }; }; &usb_1_hsphy { -- 2.30.0.478.g8a0d178c01-goog
