The driver for Slim Security Subsystem (SlimSSS) on Exynos5433 takes two
clocks - aclk (AXI/AHB clock) and pclk (APB/Advanced Peripheral Bus
clock).  The "aclk", as main high speed bus clock, is enabled first.  Then
the "pclk" is enabled.

However the driver assigned reversed names for lookup of these clocks
from devicetree, so effectively the "pclk" was enabled first.

Although it might not matter in reality, the correct order is to enable
first main/high speed bus clock - "aclk".  Also this was the intention
of the actual code.

Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>

---

Not tested, please kindly test on Exynos5433 hardware.
---
 drivers/crypto/s5p-sss.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/crypto/s5p-sss.c b/drivers/crypto/s5p-sss.c
index 682c8a450a57..8ed08130196f 100644
--- a/drivers/crypto/s5p-sss.c
+++ b/drivers/crypto/s5p-sss.c
@@ -401,7 +401,7 @@ static const struct samsung_aes_variant exynos_aes_data = {
 static const struct samsung_aes_variant exynos5433_slim_aes_data = {
        .aes_offset     = 0x400,
        .hash_offset    = 0x800,
-       .clk_names      = { "pclk", "aclk", },
+       .clk_names      = { "aclk", "pclk", },
 };
 
 static const struct of_device_id s5p_sss_dt_match[] = {
-- 
2.25.1

Reply via email to