As Dave reported:

This seems to have unintended side effects.  GIC interrupt 117 is shared
between the standard I2C controllers (i2c-bcm2835) and the l2-intc block
handling the HDMI I2C interrupts.

There is not a great way to share an interrupt between an interrupt
controller using the chained IRQ handler which is an interrupt flow and
another driver like i2c-bcm2835 which uses an interrupt handler
(although it specifies IRQF_SHARED).

Simply revert this change for now which will mean that HDMI I2C will be
polled, like it was before.

Reported-by: Dave Stevenson <dave.steven...@raspberrypi.com>
Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
---
 arch/arm/boot/dts/bcm2711.dtsi | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 462b1dfb0385..720beec54d61 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -308,14 +308,6 @@ dvp: clock@7ef00000 {
                        #reset-cells = <1>;
                };
 
-               bsc_intr: interrupt-controller@7ef00040 {
-                       compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
-                       reg = <0x7ef00040 0x30>;
-                       interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-                       interrupt-controller;
-                       #interrupt-cells = <1>;
-               };
-
                aon_intr: interrupt-controller@7ef00100 {
                        compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
                        reg = <0x7ef00100 0x30>;
@@ -362,8 +354,6 @@ ddc0: i2c@7ef04500 {
                        reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
                        reg-names = "bsc", "auto-i2c";
                        clock-frequency = <97500>;
-                       interrupt-parent = <&bsc_intr>;
-                       interrupts = <0>;
                        status = "disabled";
                };
 
@@ -405,8 +395,6 @@ ddc1: i2c@7ef09500 {
                        reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
                        reg-names = "bsc", "auto-i2c";
                        clock-frequency = <97500>;
-                       interrupt-parent = <&bsc_intr>;
-                       interrupts = <1>;
                        status = "disabled";
                };
        };
-- 
2.25.1

Reply via email to