On 2/13/2021 2:42 AM, Vladimir Oltean wrote:
> On Fri, Feb 12, 2021 at 07:46:32PM -0800, Florian Fainelli wrote:
>> BCM54210E/BCM50212E has been verified to work correctly with the
>> auto-power down configuration done by bcm54xx_adjust_rxrefclk(), add it
>> to the list of PHYs working.
>>
>> While we are at it, provide an appropriate name for the bit we are
>> changing which disables the RXC and TXC during auto-power down when
>> there is no energy on the cable.
>>
>> Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
>> ---
>
> Reviewed-by: Vladimir Oltean <olte...@gmail.com>
>
>> drivers/net/phy/broadcom.c | 8 +++++---
>> include/linux/brcmphy.h | 2 +-
>> 2 files changed, 6 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
>> index 3ce266ab521b..91fbd26c809e 100644
>> --- a/drivers/net/phy/broadcom.c
>> +++ b/drivers/net/phy/broadcom.c
>> @@ -193,6 +193,7 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device
>> *phydev)
>> if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 &&
>> BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 &&
>> BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M &&
>> + BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54210E &&
>> BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54810 &&
>> BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54811)
>> return;
>> @@ -227,9 +228,10 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device
>> *phydev)
>> val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
>>
>> if (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) {
>> - if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810 ||
>> - BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54811)
>> - val |= BCM54810_SHD_SCR3_TRDDAPD;
>> + if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54210E ||
>> + BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810 ||
>> + BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54210E)
>> + val |= BCM54XX_SHD_SCR3_RXCTXC_DIS;
>> else
>> val |= BCM54XX_SHD_SCR3_TRDDAPD;
>> }
>> diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
>> index 844dcfe789a2..16597d3fa011 100644
>> --- a/include/linux/brcmphy.h
>> +++ b/include/linux/brcmphy.h
>> @@ -193,6 +193,7 @@
>> #define BCM54XX_SHD_SCR3_DEF_CLK125 0x0001
>> #define BCM54XX_SHD_SCR3_DLLAPD_DIS 0x0002
>> #define BCM54XX_SHD_SCR3_TRDDAPD 0x0004
>> +#define BCM54XX_SHD_SCR3_RXCTXC_DIS 0x0100
>
> Curiously enough, my BCM5464R datasheet does say:
>
> The TXC and RXC outputs can be disabled during auto-power down by setting the
> “1000BASE-T/100BASE-TX/10BASE-T
> Spare Control 3 Register (Address 1Ch, Shadow Value 00101),” bit 8 =1.
>
> but when I go to the definition of the register, bit 8 is hidden. Odd.
>
> How can I ensure that the auto power down feature is doing something?
I am trying to confirm what the expected power levels should be from the
54210E product engineer so I can give you an estimate of what you should
see with and without while measure the PHY's regulators.
--
Florian
