On Wed, Feb 17, 2021 at 12:19:43PM +0100, Martin Kepplinger wrote:
> From: Angus Ainslie <an...@akkea.ca>
>
> These sections should be read only as they contain important data.
>
> Signed-off-by: Angus Ainslie <an...@akkea.ca>
> Signed-off-by: Martin Kepplinger <martin.kepplin...@puri.sm>
> ---
> .../arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
> index c2bbbdeb93e3..3c0462f81b3a 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
> @@ -258,6 +258,22 @@
> compatible = "jedec,spi-nor";
> reg = <0>;
> spi-max-frequency = <1000000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
Still a line break here is needed.
> + partition@0 {
> + label = "protected0";
> + reg = <0x00000000 0x00030000>;
> + read-only;
> + };
> + partition@30000 {
> + label = "protected1";
> + reg = <0x00030000 0x00010000>;
Drop the leading 0 in address and size. I saw some DTS using it but it's
not the common format. All nodes don't lead with 0 so why partitions are
different?
Best regards,
Krzysztof
