On Thu, Mar 4, 2021 at 4:40 PM Brad Larson <b...@pensando.io> wrote: > > This GPIO driver is for the Pensando Elba SoC which > provides control of four chip selects on two SPI busses.
I will try to avoid repeating otheris in their reviews, but my comments below. ... > +config GPIO_ELBA_SPICS > + bool "Pensando Elba SPI chip-select" Can't it be a module? Why? > + depends on ARCH_PENSANDO_ELBA_SOC > + help > + Say yes here to support the Pensndo Elba SoC SPI chip-select driver Please give more explanation what it is and why users might need it, and also tell users how the module will be named (if there is no strong argument why it can't be a module). ... > +#include <linux/of.h> It's not used here, but you missed mod_devicetable.h. ... > +/* > + * pin: 3 2 | 1 0 > + * bit: 7------6------5------4----|---3------2------1------0 > + * cs1 cs1_ovr cs0 cs0_ovr | cs1 cs1_ovr cs0 cs0_ovr > + * ssi1 | ssi0 > + */ > +#define SPICS_PIN_SHIFT(pin) (2 * (pin)) > +#define SPICS_MASK(pin) (0x3 << SPICS_PIN_SHIFT(pin)) > +#define SPICS_SET(pin, val) ((((val) << 1) | 0x1) << SPICS_PIN_SHIFT(pin)) Isn't it easier to define as ((value) << (2 * (pin) + 1) | BIT(2 * (pin))) ... > +struct elba_spics_priv { > + void __iomem *base; > + spinlock_t lock; > + struct gpio_chip chip; If you put it as a first member a container_of() becomes a no-op. OTOH dunno if there is any such container_of() use in the code. > +}; ... > +static int elba_spics_get_value(struct gpio_chip *chip, unsigned int pin) > +{ > + return -ENXIO; Hmm... Is it really acceptable error code here? > +} ... > +static int elba_spics_direction_input(struct gpio_chip *chip, unsigned int > pin) > +{ > + return -ENXIO; Ditto. > +} ... > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + p->base = devm_ioremap_resource(&pdev->dev, res); p->base = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(p->base)) { > + dev_err(&pdev->dev, "failed to remap I/O memory\n"); Duplicate noisy message. > + return PTR_ERR(p->base); > + } > + ret = devm_gpiochip_add_data(&pdev->dev, &p->chip, p); > + if (ret) { > + dev_err(&pdev->dev, "unable to add gpio chip\n"); > + return ret; > + } > + > + dev_info(&pdev->dev, "elba spics registered\n"); > + return 0; if (ret) dev_err(...); return ret; > +} -- With Best Regards, Andy Shevchenko