> -----Original Message-----
> From: Bjorn Andersson <bjorn.anders...@linaro.org>
> Sent: Wednesday, March 10, 2021 10:15 PM
> To: Rakesh Pillai <pill...@codeaurora.org>
> Cc: agr...@kernel.org; o...@wizery.com; mathieu.poir...@linaro.org;
> robh...@kernel.org; p.za...@pengutronix.de; si...@codeaurora.org; linux-
> arm-...@vger.kernel.org; linux-remotep...@vger.kernel.org;
> devicet...@vger.kernel.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH 2/2] remoteproc: qcom: q6v5_wpss: Add support for
> sc7280 WPSS
>
> On Wed 10 Mar 01:28 CST 2021, Rakesh Pillai wrote:
>
> > Add support for PIL loading of WPSS processor for SC7280
> > WPSS boot will be requested by the wifi driver and hence
> > disable auto-boot for WPSS. Also add a separate shutdown
> > sequence handler for WPSS.
> >
> > Signed-off-by: Rakesh Pillai <pill...@codeaurora.org>
> > ---
> > drivers/remoteproc/qcom_q6v5_adsp.c | 77
> ++++++++++++++++++++++++++++++++++++-
> > 1 file changed, 76 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c
> b/drivers/remoteproc/qcom_q6v5_adsp.c
> > index e024502..dc6b91d 100644
> > --- a/drivers/remoteproc/qcom_q6v5_adsp.c
> > +++ b/drivers/remoteproc/qcom_q6v5_adsp.c
> > @@ -58,6 +58,8 @@ struct adsp_pil_data {
> > const char *ssr_name;
> > const char *sysmon_name;
> > int ssctl_id;
> > + bool is_wpss;
> > + bool auto_boot;
> >
> > const char **clk_ids;
> > int num_clks;
> > @@ -96,8 +98,54 @@ struct qcom_adsp {
> > struct qcom_rproc_glink glink_subdev;
> > struct qcom_rproc_ssr ssr_subdev;
> > struct qcom_sysmon *sysmon;
> > +
> > + int (*shutdown)(struct qcom_adsp *adsp);
> > };
> >
> > +static int qcom_wpss_shutdown(struct qcom_adsp *adsp)
> > +{
> > + unsigned long timeout;
> > + unsigned int val;
> > + int ret;
> > +
> > + regmap_write(adsp->halt_map, adsp->halt_lpass +
> LPASS_HALTREQ_REG, 1);
> > +
> > + /* Wait for halt ACK from QDSP6 */
> > + timeout = jiffies + msecs_to_jiffies(ACK_TIMEOUT);
> > + for (;;) {
> > + ret = regmap_read(adsp->halt_map,
> > + adsp->halt_lpass + LPASS_HALTACK_REG,
> &val);
> > + if (ret || val || time_after(jiffies, timeout))
> > + break;
> > +
> > + usleep_range(1000, 1100);
> > + }
> > +
> > + /* Place the WPSS processor into reset */
> > + reset_control_assert(adsp->restart);
> > + /* wait after asserting subsystem restart from AOSS */
> > + usleep_range(100, 105);
> > + /* Remove the WPSS reset */
> > + reset_control_deassert(adsp->restart);
> > +
> > + usleep_range(100, 105);
> > +
> > + regmap_write(adsp->halt_map, adsp->halt_lpass +
> LPASS_HALTREQ_REG, 0);
> > +
> > + /* Wait for halt ACK from QDSP6 */
> > + timeout = jiffies + msecs_to_jiffies(ACK_TIMEOUT);
> > + for (;;) {
> > + ret = regmap_read(adsp->halt_map,
> > + adsp->halt_lpass + LPASS_HALTACK_REG,
> &val);
> > + if (ret || !val || time_after(jiffies, timeout))
> > + break;
> > +
> > + usleep_range(1000, 1100);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > static int qcom_adsp_shutdown(struct qcom_adsp *adsp)
> > {
> > unsigned long timeout;
> > @@ -270,7 +318,7 @@ static int adsp_stop(struct rproc *rproc)
> > if (ret == -ETIMEDOUT)
> > dev_err(adsp->dev, "timed out on wait\n");
> >
> > - ret = qcom_adsp_shutdown(adsp);
> > + ret = adsp->shutdown(adsp);
> > if (ret)
> > dev_err(adsp->dev, "failed to shutdown: %d\n", ret);
> >
> > @@ -439,6 +487,8 @@ static int adsp_probe(struct platform_device
> *pdev)
> > dev_err(&pdev->dev, "unable to allocate remoteproc\n");
> > return -ENOMEM;
> > }
> > +
> > + rproc->auto_boot = desc->auto_boot;
> > rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE);
> >
> > adsp = (struct qcom_adsp *)rproc->priv;
> > @@ -447,6 +497,11 @@ static int adsp_probe(struct platform_device
> *pdev)
> > adsp->info_name = desc->sysmon_name;
> > platform_set_drvdata(pdev, adsp);
> >
> > + if (desc->is_wpss)
> > + adsp->shutdown = qcom_wpss_shutdown;
> > + else
> > + adsp->shutdown = qcom_adsp_shutdown;
> > +
> > ret = adsp_alloc_memory_region(adsp);
> > if (ret)
> > goto free_rproc;
> > @@ -515,6 +570,8 @@ static const struct adsp_pil_data adsp_resource_init
> = {
> > .ssr_name = "lpass",
> > .sysmon_name = "adsp",
> > .ssctl_id = 0x14,
> > + .is_wpss = false,
> > + .auto_boot = true;
> > .clk_ids = (const char*[]) {
> > "sway_cbcr", "lpass_ahbs_aon_cbcr",
> "lpass_ahbm_aon_cbcr",
> > "qdsp6ss_xo", "qdsp6ss_sleep", "qdsp6ss_core", NULL
> > @@ -528,6 +585,8 @@ static const struct adsp_pil_data cdsp_resource_init
> = {
> > .ssr_name = "cdsp",
> > .sysmon_name = "cdsp",
> > .ssctl_id = 0x17,
> > + .is_wpss = false,
> > + .auto_boot = true;
> > .clk_ids = (const char*[]) {
> > "sway", "tbu", "bimc", "ahb_aon", "q6ss_slave",
> "q6ss_master",
> > "q6_axim", NULL
> > @@ -535,7 +594,23 @@ static const struct adsp_pil_data
> cdsp_resource_init = {
> > .num_clks = 7,
> > };
> >
> > +static const struct adsp_pil_data wpss_resource_init = {
> > + .crash_reason_smem = 626,
> > + .firmware_name = "wpss.mdt",
> > + .ssr_name = "wpss",
> > + .sysmon_name = "wpss",
> > + .ssctl_id = 0x19,
> > + .is_wpss = true,
> > + .auto_boot = false;
>
> Why is auto_boot false for the WPSS?
Wifi driver will start the remote processor when it comes up. We do not want
to load it at the start.
>
> > + .clk_ids = (const char*[]) {
> > + "gcc_wpss_ahb_bdg_mst_clk", "gcc_wpss_ahb_clk",
> > + "gcc_wpss_rscp_clk", NULL
> > + },
> > + .num_clks = 3,
> > +};
> > +
> > static const struct of_device_id adsp_of_match[] = {
> > + { .compatible = "qcom,sc7280-wpss-pil", .data = &wpss_resource_init
> },
>
> Nit. Please keep things like this sorted alphabetically.
Will fix this in the next patchset.
Thanks,
Rakesh
>
> Regards,
> Bjorn
>
> > { .compatible = "qcom,qcs404-cdsp-pil", .data = &cdsp_resource_init
> },
> > { .compatible = "qcom,sdm845-adsp-pil", .data =
> &adsp_resource_init },
> > { },
> > --
> > 2.7.4
> >
