O Sat, Mar 13, 2021 at 07:15:54PM +0000, Jonathan Cameron wrote: > On Tue, 9 Mar 2021 01:17:15 +0000 > Joe Sandom <joe.g.san...@gmail.com> wrote: > > > Driver implementation for AMS/TAOS tsl2591 ambient light sensor. > > > > This driver supports configuration via device tree and sysfs. > > Supported channels for raw infrared light intensity, > > raw combined light intensity and illuminance in lux. > > The driver additionally supports iio events on lower and > > upper thresholds. > > > > This is a very-high sensitivity light-to-digital converter that > > transforms light intensity into a digital signal. > > > > Datasheet: https://ams.com/tsl25911#tab/documents > > > > Signed-off-by: Joe Sandom <joe.g.san...@gmail.com> > > A few minor details inline. Very nearly good to go as far as > I am concerned. > > Jonathan > Thanks for the feedback Jonathan, glad to hear that we're nearly ready to merge :). The changes for V6 are complete now, will give it a couple more days before I send it out in case Andy or anyone else has any points to raise > > > --- > > > > Changes in v5: > > - Added counterpart macro for integration time in ms to field value > > - Tidied up some of the GENMASK usage > > - Removed defines for ALS persist cycle literals, placed inline instead > > - Removed unnecessary array size check & break in tsl2591_als_time_to_fval() > > - Removed unnecessary casting and replaced with get_unaligned_le16() in > > tsl2591_read_channel_data() > > - Cleaned up some return code checks on i2c calls > > - Explicit return codes rather than relying on default value at before > > entering switch statements. > > - Combine exit paths on error labels - following proper kernel idiom > > - Cleaned up managed exit path for pm runtime > > - Using reverse xmas tree convention for local vars in functions > > - Corrected datasheet tag > > > > Acknowledgements: > > - Thanks to Jonathan and Andy for the constructive feedback! > > > > NOTE: > > Rob has reviewed the binding document and no changes required it > > seems. Not sure what the best practice/convention is here; is [PATCH v5] > > sufficient or do I still need to include the series number despite > > there being no updates to the binding? please advise. Thank you! > > Always send out the full series and increase version number for all patches. > For those that haven't changed, just state that in the change log. > Remember to pick up tags from reviewers though for new versions. > > When everyone is happy I'll use the b4 utility which pulls the latest > patch series down from lore.kernel.org and figures out any new tags > for that last version. It doesn't go scraping earlier versions for > tags though. > > I might just have picked it up except for the question over spurious > interrupt handling + giving Andy more time for another look if he > wants to take one. We are fairly early in the cycle still though > so lets do this the slow and steady way of having a v6. > Thanks for this. Will be sure to send the full series out for V6! > > > > drivers/iio/light/Kconfig | 11 + > > drivers/iio/light/Makefile | 1 + > > drivers/iio/light/tsl2591.c | 1193 +++++++++++++++++++++++++++++++++++ > > 3 files changed, 1205 insertions(+) > > create mode 100644 drivers/iio/light/tsl2591.c > > > > diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig > > index 33ad4dd0b5c7..6a69a9a3577a 100644 > > --- a/drivers/iio/light/Kconfig > > +++ b/drivers/iio/light/Kconfig > > @@ -501,6 +501,17 @@ config TSL2583 > > Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices. > > Access ALS data via iio, sysfs. > > > > +config TSL2591 > > + tristate "TAOS TSL2591 ambient light sensor" > > + depends on I2C > > + help > > + Select Y here for support of the AMS/TAOS TSL2591 ambient light > > sensor, > > + featuring channels for combined visible + IR intensity and lux > > illuminance. > > + Access data via iio and sysfs. Supports iio_events. > > + > > + To compile this driver as a module, select M: the > > + module will be called tsl2591. > > + > > config TSL2772 > > tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and > > proximity sensors" > > depends on I2C > > diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile > > index ea376deaca54..d10912faf964 100644 > > --- a/drivers/iio/light/Makefile > > +++ b/drivers/iio/light/Makefile > > @@ -48,6 +48,7 @@ obj-$(CONFIG_ST_UVIS25_SPI) += st_uvis25_spi.o > > obj-$(CONFIG_TCS3414) += tcs3414.o > > obj-$(CONFIG_TCS3472) += tcs3472.o > > obj-$(CONFIG_TSL2583) += tsl2583.o > > +obj-$(CONFIG_TSL2591) += tsl2591.o > > obj-$(CONFIG_TSL2772) += tsl2772.o > > obj-$(CONFIG_TSL4531) += tsl4531.o > > obj-$(CONFIG_US5182D) += us5182d.o > > diff --git a/drivers/iio/light/tsl2591.c b/drivers/iio/light/tsl2591.c > > new file mode 100644 > > index 000000000000..ddecb32e206d > > --- /dev/null > > +++ b/drivers/iio/light/tsl2591.c > > @@ -0,0 +1,1193 @@ > > +// SPDX-License-Identifier: GPL-2.0-or-later > > +/* > > + * Copyright (C) 2020 Joe Sandom <joe.g.san...@gmail.com> > > + * > > + * Datasheet: https://ams.com/tsl25911#tab/documents > > + * > > + * Device driver for the TAOS TSL2591. This is a very-high sensitivity > > + * light-to-digital converter that transforms light intensity into a > > digital > > + * signal. > > + */ > > + > > +#include <asm/unaligned.h> > > +#include <linux/bitfield.h> > > +#include <linux/debugfs.h> > > +#include <linux/delay.h> > > +#include <linux/i2c.h> > > +#include <linux/interrupt.h> > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > +#include <linux/mutex.h> > > +#include <linux/pm_runtime.h> > > + > > +#include <linux/iio/events.h> > > +#include <linux/iio/iio.h> > > +#include <linux/iio/sysfs.h> > > + > > +/* ADC integration time, field value to time in ms*/ > > +#define TSL2591_FVAL_TO_ATIME(x) (((x) + 1) * 100) > > +/* ADC integration time, time in ms to field value */ > > +#define TSL2591_ATIME_TO_FVAL(x) (((x) / 100) - 1) > > + > > +/* TSL2591 register set */ > > +#define TSL2591_ENABLE 0x00 > > +#define TSL2591_CONTROL 0x01 > > +#define TSL2591_AILTL 0x04 > > +#define TSL2591_AILTH 0x05 > > +#define TSL2591_AIHTL 0x06 > > +#define TSL2591_AIHTH 0x07 > > +#define TSL2591_NP_AILTL 0x08 > > +#define TSL2591_NP_AILTH 0x09 > > +#define TSL2591_NP_AIHTL 0x0A > > +#define TSL2591_NP_AIHTH 0x0B > > +#define TSL2591_PERSIST 0x0C > > +#define TSL2591_PACKAGE_ID 0x11 > > +#define TSL2591_DEVICE_ID 0x12 > > +#define TSL2591_STATUS 0x13 > > +#define TSL2591_C0_DATAL 0x14 > > +#define TSL2591_C0_DATAH 0x15 > > +#define TSL2591_C1_DATAL 0x16 > > +#define TSL2591_C1_DATAH 0x17 > > + > > +/* TSL2591 command register definitions */ > > +#define TSL2591_CMD_NOP (BIT(5) | BIT(7)) > > +#define TSL2591_CMD_SF GENMASK(7, 5) > > +#define TSL2591_CMD_SF_INTSET (BIT(2) | TSL2591_CMD_SF) > > +#define TSL2591_CMD_SF_CALS_I (BIT(0) | BIT(2) | TSL2591_CMD_SF) > > +#define TSL2591_CMD_SF_CALS_NPI (GENMASK(2, 0) | TSL2591_CMD_SF) > > +#define TSL2591_CMD_SF_CNP_ALSI (BIT(1) | BIT(3) | TSL2591_CMD_SF) > > + > > +/* TSL2591 enable register definitions */ > > +#define TSL2591_PWR_ON BIT(0) > > +#define TSL2591_PWR_OFF (0 << 0) > > +#define TSL2591_ENABLE_ALS BIT(1) > > +#define TSL2591_ENABLE_ALS_INT BIT(4) > > +#define TSL2591_ENABLE_SLEEP_INT BIT(6) > > +#define TSL2591_ENABLE_NP_INT BIT(7) > > + > > +/* TSL2591 control register definitions */ > > +#define TSL2591_CTRL_ALS_INTEGRATION_100MS (0 << 0) > > +#define TSL2591_CTRL_ALS_INTEGRATION_200MS BIT(0) > > +#define TSL2591_CTRL_ALS_INTEGRATION_300MS BIT(1) > > +#define TSL2591_CTRL_ALS_INTEGRATION_400MS GENMASK(1, 0) > > +#define TSL2591_CTRL_ALS_INTEGRATION_500MS BIT(2) > > +#define TSL2591_CTRL_ALS_INTEGRATION_600MS (BIT(0) | BIT(2)) > > +#define TSL2591_CTRL_ALS_LOW_GAIN (0 << 0) > > +#define TSL2591_CTRL_ALS_MED_GAIN BIT(4) > > +#define TSL2591_CTRL_ALS_HIGH_GAIN BIT(5) > > +#define TSL2591_CTRL_ALS_MAX_GAIN GENMASK(5, 4) > > +#define TSL2591_CTRL_SYS_RESET BIT(7) > > + > > +/* TSL2591 persist register definitions */ > > +#define TSL2591_PRST_ALS_INT_CYCLE_0 (0 << 0) > > +#define TSL2591_PRST_ALS_INT_CYCLE_ANY BIT(0) > > +#define TSL2591_PRST_ALS_INT_CYCLE_2 BIT(1) > > +#define TSL2591_PRST_ALS_INT_CYCLE_3 GENMASK(1, 0) > > +#define TSL2591_PRST_ALS_INT_CYCLE_5 BIT(2) > > +#define TSL2591_PRST_ALS_INT_CYCLE_10 (BIT(0) | BIT(2)) > > +#define TSL2591_PRST_ALS_INT_CYCLE_15 GENMASK(2, 1) > > +#define TSL2591_PRST_ALS_INT_CYCLE_20 GENMASK(2, 0) > > +#define TSL2591_PRST_ALS_INT_CYCLE_25 BIT(3) > > +#define TSL2591_PRST_ALS_INT_CYCLE_30 (BIT(0) | BIT(3)) > > +#define TSL2591_PRST_ALS_INT_CYCLE_35 (BIT(1) | BIT(3)) > > +#define TSL2591_PRST_ALS_INT_CYCLE_40 (GENMASK(1, 0) | BIT(3)) > > +#define TSL2591_PRST_ALS_INT_CYCLE_45 GENMASK(3, 2) > > +#define TSL2591_PRST_ALS_INT_CYCLE_50 (BIT(0) | GENMASK(3, 2)) > > +#define TSL2591_PRST_ALS_INT_CYCLE_55 GENMASK(3, 1) > > +#define TSL2591_PRST_ALS_INT_CYCLE_60 GENMASK(3, 0) > > +#define TSL2591_PRST_ALS_INT_CYCLE_MAX TSL2591_PRST_ALS_INT_CYCLE_60 > > + > > +/* TSL2591 PID register mask */ > > +#define TSL2591_PACKAGE_ID_MASK GENMASK(5, 4) > > + > > +/* TSL2591 ID register mask */ > > +#define TSL2591_DEVICE_ID_MASK GENMASK(7, 0) > > + > > +/* TSL2591 status register masks */ > > +#define TSL2591_STS_ALS_VALID_MASK BIT(0) > > +#define TSL2591_STS_ALS_INT_MASK BIT(4) > > +#define TSL2591_STS_NPERS_INT_MASK BIT(5) > > +#define TSL2591_STS_VAL_HIGH_MASK BIT(0) > > + > > +/* TSL2591 constant values */ > > +#define TSL2591_PACKAGE_ID_VAL 0x00 > > +#define TSL2591_DEVICE_ID_VAL 0x50 > > + > > +/* Power off suspend delay time MS */ > > +#define TSL2591_POWER_OFF_DELAY_MS 2000 > > + > > +/* TSL2591 default values */ > > +#define TSL2591_DEFAULT_ALS_INT_TIME > > TSL2591_CTRL_ALS_INTEGRATION_300MS > > +#define TSL2591_DEFAULT_ALS_GAIN TSL2591_CTRL_ALS_MED_GAIN > > +#define TSL2591_DEFAULT_ALS_PERSIST > > TSL2591_PRST_ALS_INT_CYCLE_ANY > > +#define TSL2591_DEFAULT_ALS_LOWER_THRESH 100 > > +#define TSL2591_DEFAULT_ALS_UPPER_THRESH 1500 > > + > > +/* TSL2591 number of data registers */ > > +#define TSL2591_NUM_DATA_REGISTERS 4 > > + > > +/* TSL2591 number of valid status reads on ADC complete */ > > +#define TSL2591_ALS_STS_VALID_COUNT 10 > > + > > +/* TSL2591 maximum values */ > > +#define TSL2591_MAX_ALS_INT_TIME_MS 600 > > +#define TSL2591_ALS_MAX_VALUE (BIT(16) - 1) > > + > > +/* > > + * LUX calculations; > > + * AGAIN values from Adafruits TSL2591 Arduino library > > + * https://github.com/adafruit/Adafruit_TSL2591_Library > > + */ > > +#define TSL2591_CTRL_ALS_LOW_GAIN_MULTIPLIER 1 > > +#define TSL2591_CTRL_ALS_MED_GAIN_MULTIPLIER 25 > > +#define TSL2591_CTRL_ALS_HIGH_GAIN_MULTIPLIER 428 > > +#define TSL2591_CTRL_ALS_MAX_GAIN_MULTIPLIER 9876 > > +#define TSL2591_LUX_COEFFICIENT 408 > > + > > +struct tsl2591_als_settings { > > + u16 als_lower_thresh; > > + u16 als_upper_thresh; > > + u8 als_int_time; > > + u8 als_persist; > > + u8 als_gain; > > +}; > > + > > +struct tsl2591_chip { > > + struct tsl2591_als_settings als_settings; > > + struct i2c_client *client; > > + /* > > + * Keep als_settings in sync with hardware state > > + * and ensure multiple readers are serialized. > > + */ > > + struct mutex als_mutex; > > + bool events_enabled; > > +}; > > + > > +/* > > + * Period table is ALS persist cycle x integration time setting > > + * Integration times: 100ms, 200ms, 300ms, 400ms, 500ms, 600ms > > + * ALS cycles: 1, 2, 3, 5, 10, 20, 25, 30, 35, 40, 45, 50, 55, 60 > > + */ > > +static const char * const tsl2591_als_period_list[] = { > > + "0.1 0.2 0.3 0.5 1.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0", > > + "0.2 0.4 0.6 1.0 2.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0", > > + "0.3 0.6 0.9 1.5 3.0 6.0 7.5 9.0 10.5 12.0 13.5 15.0 16.5 18.0", > > + "0.4 0.8 1.2 2.0 4.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0", > > + "0.5 1.0 1.5 2.5 5.0 10.0 12.5 15.0 17.5 20.0 22.5 25.0 27.5 30.0", > > + "0.6 1.2 1.8 3.0 6.0 12.0 15.0 18.0 21.0 24.0 27.0 30.0 33.0 36.0", > > +}; > > + > > +static const int tsl2591_int_time_available[] = { > > + 100, 200, 300, 400, 500, 600, > > +}; > > + > > +static const int tsl2591_calibscale_available[] = { > > + 1, 25, 428, 9876, > > +}; > > + > > +static int tsl2591_gain_to_multiplier(const u8 als_gain) > > +{ > > + switch (als_gain) { > > + case TSL2591_CTRL_ALS_LOW_GAIN: > > + return TSL2591_CTRL_ALS_LOW_GAIN_MULTIPLIER; > > + case TSL2591_CTRL_ALS_MED_GAIN: > > + return TSL2591_CTRL_ALS_MED_GAIN_MULTIPLIER; > > + case TSL2591_CTRL_ALS_HIGH_GAIN: > > + return TSL2591_CTRL_ALS_HIGH_GAIN_MULTIPLIER; > > + case TSL2591_CTRL_ALS_MAX_GAIN: > > + return TSL2591_CTRL_ALS_MAX_GAIN_MULTIPLIER; > > + default: > > + return -EINVAL; > > + } > > +} > > + > > +static u8 tsl2591_multiplier_to_gain(const u32 multiplier) > > +{ > > + switch (multiplier) { > > + case TSL2591_CTRL_ALS_LOW_GAIN_MULTIPLIER: > > + return TSL2591_CTRL_ALS_LOW_GAIN; > > + case TSL2591_CTRL_ALS_MED_GAIN_MULTIPLIER: > > + return TSL2591_CTRL_ALS_MED_GAIN; > > + case TSL2591_CTRL_ALS_HIGH_GAIN_MULTIPLIER: > > + return TSL2591_CTRL_ALS_HIGH_GAIN; > > + case TSL2591_CTRL_ALS_MAX_GAIN_MULTIPLIER: > > + return TSL2591_CTRL_ALS_MAX_GAIN; > > + default: > > + return -EINVAL; > > + } > > +} > > + > > +static int tsl2591_persist_cycle_to_lit(const u8 als_persist) > > +{ > > + switch (als_persist) { > > + case TSL2591_PRST_ALS_INT_CYCLE_ANY: > > + return 1; > > + case TSL2591_PRST_ALS_INT_CYCLE_2: > > + return 2; > > + case TSL2591_PRST_ALS_INT_CYCLE_3: > > + return 3; > > + case TSL2591_PRST_ALS_INT_CYCLE_5: > > + return 5; > > + case TSL2591_PRST_ALS_INT_CYCLE_10: > > + return 10; > > + case TSL2591_PRST_ALS_INT_CYCLE_15: > > + return 15; > > + case TSL2591_PRST_ALS_INT_CYCLE_20: > > + return 20; > > + case TSL2591_PRST_ALS_INT_CYCLE_25: > > + return 25; > > + case TSL2591_PRST_ALS_INT_CYCLE_30: > > + return 30; > > + case TSL2591_PRST_ALS_INT_CYCLE_35: > > + return 35; > > + case TSL2591_PRST_ALS_INT_CYCLE_40: > > + return 40; > > + case TSL2591_PRST_ALS_INT_CYCLE_45: > > + return 45; > > + case TSL2591_PRST_ALS_INT_CYCLE_50: > > + return 50; > > + case TSL2591_PRST_ALS_INT_CYCLE_55: > > + return 55; > > + case TSL2591_PRST_ALS_INT_CYCLE_60: > > + return 60; > > + default: > > + return -EINVAL; > > + } > > +} > > + > > +static int tsl2591_persist_lit_to_cycle(const u8 als_persist) > > +{ > > + switch (als_persist) { > > + case 1: > > + return TSL2591_PRST_ALS_INT_CYCLE_ANY; > > + case 2: > > + return TSL2591_PRST_ALS_INT_CYCLE_2; > > + case 3: > > + return TSL2591_PRST_ALS_INT_CYCLE_3; > > + case 5: > > + return TSL2591_PRST_ALS_INT_CYCLE_5; > > + case 10: > > + return TSL2591_PRST_ALS_INT_CYCLE_10; > > + case 15: > > + return TSL2591_PRST_ALS_INT_CYCLE_15; > > + case 20: > > + return TSL2591_PRST_ALS_INT_CYCLE_20; > > + case 25: > > + return TSL2591_PRST_ALS_INT_CYCLE_25; > > + case 30: > > + return TSL2591_PRST_ALS_INT_CYCLE_30; > > + case 35: > > + return TSL2591_PRST_ALS_INT_CYCLE_35; > > + case 40: > > + return TSL2591_PRST_ALS_INT_CYCLE_40; > > + case 45: > > + return TSL2591_PRST_ALS_INT_CYCLE_45; > > + case 50: > > + return TSL2591_PRST_ALS_INT_CYCLE_50; > > + case 55: > > + return TSL2591_PRST_ALS_INT_CYCLE_55; > > + case 60: > > + return TSL2591_PRST_ALS_INT_CYCLE_60; > > + default: > > + return -EINVAL; > > + } > > +} > > + > > +static int tsl2591_compatible_int_time(struct tsl2591_chip *chip, > > + const u32 als_integration_time) > > +{ > > + switch (als_integration_time) { > > + case TSL2591_CTRL_ALS_INTEGRATION_100MS: > > + case TSL2591_CTRL_ALS_INTEGRATION_200MS: > > + case TSL2591_CTRL_ALS_INTEGRATION_300MS: > > + case TSL2591_CTRL_ALS_INTEGRATION_400MS: > > + case TSL2591_CTRL_ALS_INTEGRATION_500MS: > > + case TSL2591_CTRL_ALS_INTEGRATION_600MS: > > + return 0; > > + default: > > + return -EINVAL; > > + } > > +} > > + > > +static int tsl2591_als_time_to_fval(const u32 als_integration_time) > > +{ > > + int i; > > + > > + for (i = 0; i < ARRAY_SIZE(tsl2591_int_time_available); ++i) { > > + if (als_integration_time == tsl2591_int_time_available[i]) > > + return TSL2591_ATIME_TO_FVAL(als_integration_time); > > + } > > + > > + return -EINVAL; > > +} > > + > > +static int tsl2591_compatible_gain(struct tsl2591_chip *chip, const u8 > > als_gain) > > +{ > > + switch (als_gain) { > > + case TSL2591_CTRL_ALS_LOW_GAIN: > > + case TSL2591_CTRL_ALS_MED_GAIN: > > + case TSL2591_CTRL_ALS_HIGH_GAIN: > > + case TSL2591_CTRL_ALS_MAX_GAIN: > > + return 0; > > + default: > > + return -EINVAL; > > + } > > +} > > + > > +static int tsl2591_compatible_als_persist_cycle(struct tsl2591_chip *chip, > > + const u32 als_persist) > > +{ > > + switch (als_persist) { > > + case TSL2591_PRST_ALS_INT_CYCLE_ANY: > > + case TSL2591_PRST_ALS_INT_CYCLE_2: > > + case TSL2591_PRST_ALS_INT_CYCLE_3: > > + case TSL2591_PRST_ALS_INT_CYCLE_5: > > + case TSL2591_PRST_ALS_INT_CYCLE_10: > > + case TSL2591_PRST_ALS_INT_CYCLE_15: > > + case TSL2591_PRST_ALS_INT_CYCLE_20: > > + case TSL2591_PRST_ALS_INT_CYCLE_25: > > + case TSL2591_PRST_ALS_INT_CYCLE_30: > > + case TSL2591_PRST_ALS_INT_CYCLE_35: > > + case TSL2591_PRST_ALS_INT_CYCLE_40: > > + case TSL2591_PRST_ALS_INT_CYCLE_45: > > + case TSL2591_PRST_ALS_INT_CYCLE_50: > > + case TSL2591_PRST_ALS_INT_CYCLE_55: > > + case TSL2591_PRST_ALS_INT_CYCLE_60: > > + return 0; > > + default: > > + return -EINVAL; > > + } > > +} > > + > > +static int tsl2591_wait_adc_complete(struct tsl2591_chip *chip) > > +{ > > + struct tsl2591_als_settings settings = chip->als_settings; > > + struct i2c_client *client = chip->client; > > + int delay; > > + int ret; > > + int i; > > + > > + delay = TSL2591_FVAL_TO_ATIME(settings.als_int_time); > > + if (!delay) > > + return -EINVAL; > > + > > + /* > > + * Sleep for ALS integration time to allow enough time > > + * for an ADC read cycle to complete. Check status after > > + * delay for ALS valid. > > + */ > > + msleep(delay); > > + > > + /* Check for status ALS valid flag for up to 100ms */ > > + for (i = 0; i < TSL2591_ALS_STS_VALID_COUNT; ++i) { > > + ret = i2c_smbus_read_byte_data(client, > > + TSL2591_CMD_NOP | > > TSL2591_STATUS); > > + if (ret < 0) { > > + dev_err(&client->dev, "Failed to read register\n"); > > + return -EINVAL; > > + } > > + ret = FIELD_GET(TSL2591_STS_ALS_VALID_MASK, ret); > > + if (ret == TSL2591_STS_VAL_HIGH_MASK) > > + break; > > + > > + if (i == TSL2591_ALS_STS_VALID_COUNT - 1) > > + return -ENODATA; > > + > > + usleep_range(9000, 10000); > > + } > > + > > + return 0; > > +} > > + > > +/* > > + * tsl2591_read_channel_data - Reads raw channel data and calculates lux > > + * > > + * Formula for lux calculation; > > + * Derived from Adafruit's TSL2591 library > > + * Link: https://github.com/adafruit/Adafruit_TSL2591_Library > > + * Counts Per Lux (CPL) = (ATIME_ms * AGAIN) / LUX DF > > + * lux = ((C0DATA - C1DATA) * (1 - (C1DATA / C0DATA))) / CPL > > + * > > + * Scale values to get more representative value of lux i.e. > > + * lux = ((C0DATA - C1DATA) * (1000 - ((C1DATA * 1000) / C0DATA))) / CPL > > + * > > + * Channel 0 = IR + Visible > > + * Channel 1 = IR only > > + */ > > +static int tsl2591_read_channel_data(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, > > + int *val, int *val2) > > +{ > > + struct tsl2591_chip *chip = iio_priv(indio_dev); > > + struct tsl2591_als_settings *settings = &chip->als_settings; > > + struct i2c_client *client = chip->client; > > + > > + u8 als_data[TSL2591_NUM_DATA_REGISTERS]; > > + int counts_per_lux, int_time_fval, gain_multi, lux; > > + u16 als_ch0, als_ch1; > > + int ret; > > + > > + ret = tsl2591_wait_adc_complete(chip); > > + if (ret < 0) { > > + dev_err(&client->dev, "No data available. Err: %d\n", ret); > > + return ret; > > + } > > + > > + ret = i2c_smbus_read_i2c_block_data(client, > > + TSL2591_CMD_NOP | TSL2591_C0_DATAL, > > + sizeof(als_data), als_data); > > + if (ret < 0) { > > + dev_err(&client->dev, "Failed to read data bytes"); > > + return ret; > > + } > > + > > + als_ch0 = get_unaligned_le16(&als_data[0]); > > + als_ch1 = get_unaligned_le16(&als_data[2]); > > + > > + switch (chan->type) { > > + case IIO_INTENSITY: > > + if (chan->channel2 == IIO_MOD_LIGHT_BOTH) > > + *val = als_ch0; > > + else if (chan->channel2 == IIO_MOD_LIGHT_IR) > > + *val = als_ch1; > > + else > > + return -EINVAL; > > + break; > > + case IIO_LIGHT: > > + gain_multi = tsl2591_gain_to_multiplier(settings->als_gain); > > + if (gain_multi < 0) { > > + dev_err(&client->dev, "Invalid multiplier"); > > + return gain_multi; > > + } > > + > > + int_time_fval = TSL2591_FVAL_TO_ATIME(settings->als_int_time); > > + /* Calculate counts per lux value */ > > + counts_per_lux = (int_time_fval * gain_multi) / > > TSL2591_LUX_COEFFICIENT; > > + > > + dev_dbg(&client->dev, "Counts Per Lux: %d\n", counts_per_lux); > > + > > + /* Calculate lux value */ > > + lux = ((als_ch0 - als_ch1) * > > + (1000 - ((als_ch1 * 1000) / als_ch0))) / counts_per_lux; > > + > > + dev_dbg(&client->dev, "Raw lux calculation: %d\n", lux); > > + > > + /* Divide by 1000 to get real lux value before scaling */ > > + *val = lux / 1000; > > + > > + /* Get the decimal part of lux reading */ > > + *val2 = ((lux - (*val * 1000)) * 1000); > > + > > + break; > > + default: > > + return -EINVAL; > > + } > > + > > + return 0; > > +} > > + > > +static int tsl2591_set_als_gain_int_time(struct tsl2591_chip *chip) > > +{ > > + struct tsl2591_als_settings als_settings = chip->als_settings; > > + struct i2c_client *client = chip->client; > > + int ret; > > + > > + ret = i2c_smbus_write_byte_data(client, > > + TSL2591_CMD_NOP | TSL2591_CONTROL, > > + als_settings.als_int_time | > > als_settings.als_gain); > > + if (ret) > > + dev_err(&client->dev, "Failed to set als gain & int time\n"); > > + > > + return ret; > > +} > > + > > +static int tsl2591_set_als_thresholds(struct tsl2591_chip *chip) > > +{ > > + struct tsl2591_als_settings als_settings = chip->als_settings; > > + struct i2c_client *client = chip->client; > > + > > + u8 als_lower_l, als_lower_h, als_upper_l, als_upper_h; > > + int ret; > > + > > + if (als_settings.als_lower_thresh >= als_settings.als_upper_thresh) > > + return -EINVAL; > > + > > + if (als_settings.als_upper_thresh > TSL2591_ALS_MAX_VALUE) > > + return -EINVAL; > > + > > + if (als_settings.als_upper_thresh < als_settings.als_lower_thresh) > > + return -EINVAL; > > + > > + als_lower_l = (als_settings.als_lower_thresh & 0xFF); > > + als_lower_h = ((als_settings.als_lower_thresh >> 8) & 0xFF); > > + als_upper_l = (als_settings.als_upper_thresh & 0xFF); > > + als_upper_h = ((als_settings.als_upper_thresh >> 8) & 0xFF); > > + > > + ret = i2c_smbus_write_byte_data(client, > > + TSL2591_CMD_NOP | TSL2591_AILTL, > > + als_lower_l); > > + if (ret) { > > + dev_err(&client->dev, "Failed to set als lower threshold\n"); > > + return ret; > > + } > > + > > + ret = i2c_smbus_write_byte_data(client, > > + TSL2591_CMD_NOP | TSL2591_AILTH, > > + als_lower_h); > > + if (ret) { > > + dev_err(&client->dev, "Failed to set als lower threshold\n"); > > + return ret; > > + } > > + > > + ret = i2c_smbus_write_byte_data(client, > > + TSL2591_CMD_NOP | TSL2591_AIHTL, > > + als_upper_l); > > + if (ret) { > > + dev_err(&client->dev, "Failed to set als upper threshold\n"); > > + return ret; > > + } > > + > > + ret = i2c_smbus_write_byte_data(client, > > + TSL2591_CMD_NOP | TSL2591_AIHTH, > > + als_upper_h); > > + if (ret) { > > + dev_err(&client->dev, "Failed to set als upper threshold\n"); > > + return ret; > > + } > > + > > + return 0; > > +} > > + > > +static int tsl2591_set_als_persist_cycle(struct tsl2591_chip *chip) > > +{ > > + struct tsl2591_als_settings als_settings = chip->als_settings; > > + struct i2c_client *client = chip->client; > > + int ret; > > + > > + ret = i2c_smbus_write_byte_data(client, > > + TSL2591_CMD_NOP | TSL2591_PERSIST, > > + als_settings.als_persist); > > + if (ret) > > + dev_err(&client->dev, "Failed to set als persist cycle\n"); > > + > > + return ret; > > +} > > + > > +static int tsl2591_set_power_state(struct tsl2591_chip *chip, u8 state) > > +{ > > + struct i2c_client *client = chip->client; > > + int ret; > > + > > + ret = i2c_smbus_write_byte_data(client, > > + TSL2591_CMD_NOP | TSL2591_ENABLE, > > + state); > > + if (ret) > > + dev_err(&client->dev, > > + "Failed to set the power state to %#04x\n", state); > > + > > + return ret; > > +} > > + > > +static ssize_t tsl2591_in_illuminance_period_available_show(struct device > > *dev, > > + struct > > device_attribute *attr, > > + char *buf) > > +{ > > + struct iio_dev *indio_dev = dev_to_iio_dev(dev); > > + struct tsl2591_chip *chip = iio_priv(indio_dev); > > + > > + return snprintf(buf, PAGE_SIZE, "%s\n", > > + > > tsl2591_als_period_list[chip->als_settings.als_int_time]); > > +} > > + > > +static IIO_DEVICE_ATTR_RO(tsl2591_in_illuminance_period_available, 0); > > + > > +static struct attribute *tsl2591_event_attrs_ctrl[] = { > > + &iio_dev_attr_tsl2591_in_illuminance_period_available.dev_attr.attr, > > + NULL > > +}; > > + > > +static const struct attribute_group tsl2591_event_attribute_group = { > > + .attrs = tsl2591_event_attrs_ctrl, > > +}; > > + > > +static const struct iio_event_spec tsl2591_events[] = { > > + { > > + .type = IIO_EV_TYPE_THRESH, > > + .dir = IIO_EV_DIR_RISING, > > + .mask_separate = BIT(IIO_EV_INFO_VALUE), > > + }, { > > + .type = IIO_EV_TYPE_THRESH, > > + .dir = IIO_EV_DIR_FALLING, > > + .mask_separate = BIT(IIO_EV_INFO_VALUE), > > + }, { > > + .type = IIO_EV_TYPE_THRESH, > > + .dir = IIO_EV_DIR_EITHER, > > + .mask_separate = BIT(IIO_EV_INFO_PERIOD) | > > + BIT(IIO_EV_INFO_ENABLE), > > + }, > > +}; > > + > > +static const struct iio_chan_spec tsl2591_channels[] = { > > + { > > + .type = IIO_INTENSITY, > > + .modified = 1, > > + .channel2 = IIO_MOD_LIGHT_IR, > > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), > > + .info_mask_shared_by_all_available = > > BIT(IIO_CHAN_INFO_INT_TIME) | > > + > > BIT(IIO_CHAN_INFO_CALIBSCALE), > > + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME) | > > + BIT(IIO_CHAN_INFO_CALIBSCALE) > > + }, > > + { > > + .type = IIO_INTENSITY, > > + .modified = 1, > > + .channel2 = IIO_MOD_LIGHT_BOTH, > > + .event_spec = tsl2591_events, > > + .num_event_specs = ARRAY_SIZE(tsl2591_events), > > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), > > + .info_mask_shared_by_all_available = > > BIT(IIO_CHAN_INFO_INT_TIME) | > > + > > BIT(IIO_CHAN_INFO_CALIBSCALE), > > + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME) | > > + BIT(IIO_CHAN_INFO_CALIBSCALE) > > + }, > > + { > > + .type = IIO_LIGHT, > > + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), > > + .info_mask_shared_by_all_available = > > BIT(IIO_CHAN_INFO_INT_TIME) | > > + > > BIT(IIO_CHAN_INFO_CALIBSCALE), > > + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME) | > > + BIT(IIO_CHAN_INFO_CALIBSCALE) > > + }, > > +}; > > + > > +static int tsl2591_read_raw(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, > > + int *val, int *val2, long mask) > > +{ > > + struct tsl2591_chip *chip = iio_priv(indio_dev); > > + struct i2c_client *client = chip->client; > > + int ret; > > + > > + pm_runtime_get_sync(&client->dev); > > + > > + mutex_lock(&chip->als_mutex); > > + > > + switch (mask) { > > + case IIO_CHAN_INFO_RAW: > > + if (chan->type != IIO_INTENSITY) { > > + ret = -EINVAL; > > + break; > > + } > > + > > + ret = tsl2591_read_channel_data(indio_dev, chan, val, val2); > > + if (ret < 0) > > + break; > > + > > + ret = IIO_VAL_INT; > > + break; > > + case IIO_CHAN_INFO_PROCESSED: > > + if (chan->type != IIO_LIGHT) { > > + ret = -EINVAL; > > + break; > > + } > > + > > + ret = tsl2591_read_channel_data(indio_dev, chan, val, val2); > > + if (ret < 0) > > + break; > > + > > + ret = IIO_VAL_INT_PLUS_MICRO; > > + break; > > + case IIO_CHAN_INFO_INT_TIME: > > + if (chan->type != IIO_INTENSITY) { > > + ret = -EINVAL; > > + break; > > + } > > + > > + *val = TSL2591_FVAL_TO_ATIME(chip->als_settings.als_int_time); > > + ret = IIO_VAL_INT; > > + break; > > + case IIO_CHAN_INFO_CALIBSCALE: > > + if (chan->type != IIO_INTENSITY) { > > + ret = -EINVAL; > > + break; > > + } > > + > > + *val = tsl2591_gain_to_multiplier(chip->als_settings.als_gain); > > + ret = IIO_VAL_INT; > > + break; > > + default: > > + ret = -EINVAL; > > + } > > + > > + mutex_unlock(&chip->als_mutex); > > + > > + pm_runtime_mark_last_busy(&client->dev); > > + pm_runtime_put_autosuspend(&client->dev); > > + > > + return ret; > > +} > > + > > +static int tsl2591_write_raw(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, > > + int val, int val2, long mask) > > +{ > > + struct tsl2591_chip *chip = iio_priv(indio_dev); > > + > > + u32 int_time; > > + u8 gain; > > + int ret; > > + > > + mutex_lock(&chip->als_mutex); > > + > > + switch (mask) { > > + case IIO_CHAN_INFO_INT_TIME: > > + int_time = tsl2591_als_time_to_fval(val); > > + if (int_time < 0) { > > + ret = int_time; > > + goto err; > > + } > > + ret = tsl2591_compatible_int_time(chip, int_time); > > + if (ret < 0) > > + goto err; > > + > > + chip->als_settings.als_int_time = int_time; > > + break; > > + case IIO_CHAN_INFO_CALIBSCALE: > > + gain = tsl2591_multiplier_to_gain(val); > > + if (gain < 0) { > > + ret = gain; > > + goto err; > > + } > > + ret = tsl2591_compatible_gain(chip, gain); > > + if (ret < 0) > > + goto err; > > + > > + chip->als_settings.als_gain = gain; > > + break; > > + default: > > + ret = -EINVAL; > > + goto err; > > + } > > + > > + ret = tsl2591_set_als_gain_int_time(chip); > > + if (ret < 0) > > + goto err; > > + > > +err: > > + mutex_unlock(&chip->als_mutex); > > + return ret; > > +} > > + > > +static int tsl2591_read_available(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, > > + const int **vals, int *type, int *length, > > + long mask) > > +{ > > + switch (mask) { > > + case IIO_CHAN_INFO_INT_TIME: > > + *length = ARRAY_SIZE(tsl2591_int_time_available); > > + *vals = tsl2591_int_time_available; > > + *type = IIO_VAL_INT; > > + return IIO_AVAIL_LIST; > > + > > + case IIO_CHAN_INFO_CALIBSCALE: > > + *length = ARRAY_SIZE(tsl2591_calibscale_available); > > + *vals = tsl2591_calibscale_available; > > + *type = IIO_VAL_INT; > > + return IIO_AVAIL_LIST; > > + default: > > + return -EINVAL; > > + } > > +} > > + > > +static int tsl2591_read_event_value(struct iio_dev *indio_dev, > > + const struct iio_chan_spec *chan, > > + enum iio_event_type type, > > + enum iio_event_direction dir, > > + enum iio_event_info info, int *val, > > + int *val2) > > +{ > > + struct tsl2591_chip *chip = iio_priv(indio_dev); > > + struct i2c_client *client = chip->client; > > + int als_persist, int_time, period; > > + int ret; > > + > > + mutex_lock(&chip->als_mutex); > > + > > + switch (info) { > > + case IIO_EV_INFO_VALUE: > > + switch (dir) { > > + case IIO_EV_DIR_RISING: > > + *val = chip->als_settings.als_upper_thresh; > > + break; > > + case IIO_EV_DIR_FALLING: > > + *val = chip->als_settings.als_lower_thresh; > > + break; > > + default: > > + ret = -EINVAL; > > + goto err; > > + } > > + ret = IIO_VAL_INT; > > + break; > > + case IIO_EV_INFO_PERIOD: > > + ret = i2c_smbus_read_byte_data(client, > > + TSL2591_CMD_NOP | > > TSL2591_PERSIST); > > + if (ret <= 0 || ret > TSL2591_PRST_ALS_INT_CYCLE_MAX) > > + goto err; > > + > > + als_persist = tsl2591_persist_cycle_to_lit(ret); > > + int_time = > > TSL2591_FVAL_TO_ATIME(chip->als_settings.als_int_time); > > + period = als_persist * (int_time * MSEC_PER_SEC); > > + > > + *val = period / USEC_PER_SEC; > > + *val2 = period % USEC_PER_SEC; > > + > > + ret = IIO_VAL_INT_PLUS_MICRO; > > + break; > > + default: > > + ret = -EINVAL; > > + goto err; > > + } > > + > > +err: > > + mutex_unlock(&chip->als_mutex); > > + return ret; > > +} > > + > > +static int tsl2591_write_event_value(struct iio_dev *indio_dev, > > + const struct iio_chan_spec *chan, > > + enum iio_event_type type, > > + enum iio_event_direction dir, > > + enum iio_event_info info, int val, > > + int val2) > > +{ > > + struct tsl2591_chip *chip = iio_priv(indio_dev); > > + int period, int_time, als_persist; > > + int ret; > > + > > + if (val < 0 || val2 < 0) > > + return -EINVAL; > > + > > + mutex_lock(&chip->als_mutex); > > + > > + switch (info) { > > + case IIO_EV_INFO_VALUE: > > + if (val > TSL2591_ALS_MAX_VALUE) { > > + ret = -EINVAL; > > + goto err; > > + } > > + > > + /* > Suggestion below to wrap setting up cached state and hardware into > one call could also incorporate these adjustments. > > ret = tsl2591_set_als_threshold_upper(chip, val); > Could be responsible for shifting the lower threshold, writing cache > and writing to hardware. > Absolutely, definitely room for improvement here. I've taken the suggestion and have implemented in V6.
> > + * Lower threshold should not be greater than upper. If this > > + * is the case, then assert upper threshold to new lower > > + * threshold + 1 to avoid ordering issues when setting > > + * thresholds. > > + */ > > + if (dir == IIO_EV_DIR_FALLING) > > + if (val > chip->als_settings.als_upper_thresh) > > + chip->als_settings.als_upper_thresh = val + 1; > > + > > + /* > > + * Upper threshold should not be less than lower. If this > > + * is the case, then assert lower threshold to new upper > > + * threshold - 1 to avoid ordering issues when setting > > + * thresholds. > > + */ > > + if (dir == IIO_EV_DIR_RISING) > > + if (val < chip->als_settings.als_lower_thresh) > > + chip->als_settings.als_lower_thresh = val - 1; > > + > > + switch (dir) { > > + case IIO_EV_DIR_RISING: > > + chip->als_settings.als_upper_thresh = val; > > + ret = tsl2591_set_als_thresholds(chip); > > + if (ret < 0) > > + goto err; > > + break; > > + case IIO_EV_DIR_FALLING: > > + chip->als_settings.als_lower_thresh = val; > > + ret = tsl2591_set_als_thresholds(chip); > > + if (ret < 0) > > + goto err; > > + break; > > + default: > > + ret = -EINVAL; > > + goto err; > > + } > > + break; > > + case IIO_EV_INFO_PERIOD: > > + int_time = > > TSL2591_FVAL_TO_ATIME(chip->als_settings.als_int_time); > > + > > + period = ((val * MSEC_PER_SEC) + > > + (val2 / MSEC_PER_SEC)) / int_time; > > + > > + als_persist = tsl2591_persist_lit_to_cycle(period); > > + if (als_persist < 0) { > > + ret = -EINVAL; > > + goto err; > > + } > > + > > + ret = tsl2591_compatible_als_persist_cycle(chip, als_persist); > > + if (ret < 0) > > + goto err; > > + chip->als_settings.als_persist = als_persist; > > + ret = tsl2591_set_als_persist_cycle(chip); > > This is very much a suggestion, feel free to ignore! > > Rather than this approach a) set the value in chip, b) call function to > update hardware, > how about instead having > ret = tsl2591_set_als_persist_cycle(chip, als_persist); > which does both those actions? > Bit trickier for threshold cases, but could be done there by having separate > upper and lower versions. > Agree, cleaner approach doing it this way. Implemented in V6! > > + if (ret < 0) > > + goto err; > > + break; > > + default: > > + ret = -EINVAL; > > + goto err; > > + } > > + > > +err: > > + mutex_unlock(&chip->als_mutex); > > + return ret; > > +} > > + > > +static int tsl2591_read_event_config(struct iio_dev *indio_dev, > > + const struct iio_chan_spec *chan, > > + enum iio_event_type type, > > + enum iio_event_direction dir) > > +{ > > + struct tsl2591_chip *chip = iio_priv(indio_dev); > > + > > + return chip->events_enabled; > > +} > > + > > +static int tsl2591_write_event_config(struct iio_dev *indio_dev, > > + const struct iio_chan_spec *chan, > > + enum iio_event_type type, > > + enum iio_event_direction dir, > > + int state) > > +{ > > + struct tsl2591_chip *chip = iio_priv(indio_dev); > > + struct i2c_client *client = chip->client; > > + > > + if (state && !chip->events_enabled) { > > + chip->events_enabled = true; > > + pm_runtime_get_sync(&client->dev); > > + } else if (!state && chip->events_enabled) { > > + chip->events_enabled = false; > > + pm_runtime_mark_last_busy(&client->dev); > > + pm_runtime_put_autosuspend(&client->dev); > > + } > > + > > + return 0; > > +} > > + > > +static const struct iio_info tsl2591_info = { > > + .event_attrs = &tsl2591_event_attribute_group, > > + .read_raw = tsl2591_read_raw, > > + .write_raw = tsl2591_write_raw, > > + .read_avail = tsl2591_read_available, > > + .read_event_value = tsl2591_read_event_value, > > + .write_event_value = tsl2591_write_event_value, > > + .read_event_config = tsl2591_read_event_config, > > + .write_event_config = tsl2591_write_event_config, > > +}; > > + > > +static int __maybe_unused tsl2591_suspend(struct device *dev) > > +{ > > + struct iio_dev *indio_dev = dev_get_drvdata(dev); > > + struct tsl2591_chip *chip = iio_priv(indio_dev); > > + int ret; > > + > > + mutex_lock(&chip->als_mutex); > > + ret = tsl2591_set_power_state(chip, TSL2591_PWR_OFF); > > + mutex_unlock(&chip->als_mutex); > > + > > + return ret; > > +} > > + > > +static int __maybe_unused tsl2591_resume(struct device *dev) > > +{ > > + struct iio_dev *indio_dev = dev_get_drvdata(dev); > > + struct tsl2591_chip *chip = iio_priv(indio_dev); > > + int power_state; > > + int ret; > > + > > + if (chip->events_enabled) > > + power_state = TSL2591_PWR_ON | > > + TSL2591_ENABLE_ALS_INT | > > + TSL2591_ENABLE_ALS; > > + else > > + power_state = TSL2591_PWR_ON | TSL2591_ENABLE_ALS; > > Trivial, but it might be clearer that we are just setting one extra flag if > written as > > int power_state = TSL2591_PWR_ON | TSL2591_ENABLE_ALS; > > if (chip->events_enabled) > power_state |= TSL2591_ENABLE_ALS_INT; > Absolutely. Much clearer! Implemented in V6 > > + > > + mutex_lock(&chip->als_mutex); > > + ret = tsl2591_set_power_state(chip, power_state); > > + mutex_unlock(&chip->als_mutex); > > + > > + return ret; > > +} > > + > > +static const struct dev_pm_ops tsl2591_pm_ops = { > > + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, > > pm_runtime_force_resume) > > + SET_RUNTIME_PM_OPS(tsl2591_suspend, tsl2591_resume, NULL) > > +}; > > + > > +static irqreturn_t tsl2591_event_handler(int irq, void *private) > > +{ > > + struct iio_dev *dev_info = private; > > + struct tsl2591_chip *chip = iio_priv(dev_info); > > + struct i2c_client *client = chip->client; > > + > > + if (!chip->events_enabled) > > + return IRQ_HANDLED; > > This looks like a spurious interrupt to me. If it's not add a comment > explaining how we get here. If it is spurious then > return IRQ_NONE; to indicate that we haven't handled it to the > interrupt code. > Good catch. This should definitely be IRQ_NONE. Implemented in V6 > > + > > + iio_push_event(dev_info, > > + IIO_UNMOD_EVENT_CODE(IIO_LIGHT, 0, > > + IIO_EV_TYPE_THRESH, > > + IIO_EV_DIR_EITHER), > > + iio_get_time_ns(dev_info)); > > + > > + /* Clear ALS irq */ > > + i2c_smbus_write_byte(client, TSL2591_CMD_SF_CALS_NPI); > > + > > + return IRQ_HANDLED; > > +} > > + > > +static int tsl2591_load_defaults(struct tsl2591_chip *chip) > > +{ > > + int ret; > > + > > + chip->als_settings.als_int_time = TSL2591_DEFAULT_ALS_INT_TIME; > > + chip->als_settings.als_gain = TSL2591_DEFAULT_ALS_GAIN; > > + chip->als_settings.als_persist = TSL2591_DEFAULT_ALS_PERSIST; > > + chip->als_settings.als_lower_thresh = TSL2591_DEFAULT_ALS_LOWER_THRESH; > > + chip->als_settings.als_upper_thresh = TSL2591_DEFAULT_ALS_UPPER_THRESH; > > + > > + ret = tsl2591_set_als_gain_int_time(chip); > > + if (ret < 0) > > + return ret; > > + > > + ret = tsl2591_set_als_persist_cycle(chip); > > + if (ret < 0) > > + return ret; > > + > > + ret = tsl2591_set_als_thresholds(chip); > > + if (ret < 0) > > + return ret; > > + > > + return 0; > > +} > > + > > +static void tsl2591_chip_off(void *data) > > +{ > > + struct iio_dev *indio_dev = data; > > + struct tsl2591_chip *chip = iio_priv(indio_dev); > > + struct i2c_client *client = chip->client; > > + > > + pm_runtime_disable(&client->dev); > > + pm_runtime_set_suspended(&client->dev); > > + pm_runtime_put_noidle(&client->dev); > > + > > + tsl2591_set_power_state(chip, TSL2591_PWR_OFF); > > +} > > + > > +static int tsl2591_probe(struct i2c_client *client) > > +{ > > + struct tsl2591_chip *chip; > > + struct iio_dev *indio_dev; > > + int ret; > > + > > + if (!i2c_check_functionality(client->adapter, > > + I2C_FUNC_SMBUS_BYTE_DATA)) { > > + dev_err(&client->dev, > > + "I2C smbus byte data functionality is not supported\n"); > > + return -EOPNOTSUPP; > > + } > > + > > + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip)); > > + if (!indio_dev) > > + return -ENOMEM; > > + > > + chip = iio_priv(indio_dev); > > + chip->client = client; > > + i2c_set_clientdata(client, indio_dev); > > Not used that I can see. > > > + > > + if (client->irq) { > > + ret = devm_request_threaded_irq(&client->dev, client->irq, > > + NULL, tsl2591_event_handler, > > + IRQF_TRIGGER_FALLING | > > IRQF_ONESHOT, > > + "tsl2591_irq", indio_dev); > > + if (ret) { > > + dev_err(&client->dev, "IRQ request error %d\n", -ret); > > + return -EINVAL; > > + } > > + } > > + > > + mutex_init(&chip->als_mutex); > > + > > + ret = i2c_smbus_read_byte_data(client, > > + TSL2591_CMD_NOP | TSL2591_DEVICE_ID); > > + if (ret < 0) { > > + dev_err(&client->dev, > > + "Failed to read the device ID register\n"); > > + return ret; > > + } > > + ret = FIELD_GET(TSL2591_DEVICE_ID_MASK, ret); > > + if (ret != TSL2591_DEVICE_ID_VAL) { > > + dev_err(&client->dev, "Device ID: %#04x unknown\n", ret); > > + return -EINVAL; > > + } > > + > > + indio_dev->info = &tsl2591_info; > > + indio_dev->channels = tsl2591_channels; > > + indio_dev->num_channels = ARRAY_SIZE(tsl2591_channels); > > + indio_dev->modes = INDIO_DIRECT_MODE; > > + indio_dev->name = chip->client->name; > > + chip->events_enabled = false; > > + > > + pm_runtime_enable(&client->dev); > > + pm_runtime_set_autosuspend_delay(&client->dev, > > + TSL2591_POWER_OFF_DELAY_MS); > > + pm_runtime_use_autosuspend(&client->dev); > > + > > + /* > > + * Add chip off to automatically managed path and disable runtime > > + * power management. This ensures that the chip power management > > + * is handled correctly on driver remove. tsl2591_chip_off must be > > + * added to the managed path after pm runtime is enabled and before > > + * any error exit paths are met to ensure we're not left in a state > > + * of pm runtime not being disabled properly. > > + */ > > + ret = devm_add_action_or_reset(&client->dev, tsl2591_chip_off, > > + indio_dev); > > + if (ret < 0) > > + return -EINVAL; > > + > > + ret = tsl2591_load_defaults(chip); > > + if (ret < 0) { > > + dev_err(&client->dev, "Failed to load sensor defaults\n"); > > + return -EINVAL; > > + } > > + > > + ret = i2c_smbus_write_byte(client, TSL2591_CMD_SF_CALS_NPI); > > + if (ret < 0) { > > + dev_err(&client->dev, "Failed to clear als irq\n"); > > + return -EINVAL; > > + } > > + > > + return devm_iio_device_register(&client->dev, indio_dev); > > +} > > + > > +static const struct of_device_id tsl2591_of_match[] = { > > + { .compatible = "amstaos,tsl2591"}, > > + {} > > +}; > > +MODULE_DEVICE_TABLE(of, tsl2591_of_match); > > + > > +static struct i2c_driver tsl2591_driver = { > > + .driver = { > > + .name = "tsl2591", > > + .pm = &tsl2591_pm_ops, > > + .of_match_table = tsl2591_of_match, > > + }, > > + .probe_new = tsl2591_probe > > +}; > > +module_i2c_driver(tsl2591_driver); > > + > > +MODULE_AUTHOR("Joe Sandom <joe.g.san...@gmail.com>"); > > +MODULE_DESCRIPTION("TAOS tsl2591 ambient light sensor driver"); > > +MODULE_LICENSE("GPL"); >