Hi, Jitao:
On Tue, 2021-03-30 at 23:53 +0800, Jitao Shi wrote:
> Add the atomic_get_output_bus_fmts, atomic_get_input_bus_fmts to negociate
> the possible output and input formats for the current mode and monitor,
> and use the negotiated formats in a basic atomic_check callback.
>
> Signed-off-by: Jitao Shi <jitao....@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_dpi.c | 96
> ++++++++++++++++++++++++++++++++++++--
> 1 file changed, 91 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 87bb27649c4c..4e45d1b01b0c 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -81,6 +81,8 @@ struct mtk_dpi {
> struct pinctrl *pinctrl;
> struct pinctrl_state *pins_gpio;
> struct pinctrl_state *pins_dpi;
> + unsigned int in_bus_format;
> + unsigned int out_bus_format;
Why do you keep these two value? You does not use them.
> bool ddr_edge_sel;
> int refcount;
> };
> @@ -534,6 +536,92 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
> return 0;
> }
>
> +#define MAX_OUTPUT_SEL_FORMATS 2
> +
> +static u32 *mtk_dpi_bridge_atomic_get_output_bus_fmts(struct drm_bridge
> *bridge,
> + struct drm_bridge_state *bridge_state,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state,
> + unsigned int *num_output_fmts)
> +{
> + struct drm_display_mode *mode = &crtc_state->mode;
> + u32 *output_fmts;
> + struct mtk_dpi *dpi = bridge_to_dpi(bridge);
> +
> + *num_output_fmts = 0;
> +
> + output_fmts = kcalloc(MAX_OUTPUT_SEL_FORMATS, sizeof(*output_fmts),
> + GFP_KERNEL);
> + if (!output_fmts)
> + return NULL;
> +
> + /* Default 8bit RGB fallback */
> + if (dpi->conf->dual_edge) {
> + output_fmts[0] = MEDIA_BUS_FMT_RGB888_2X12_LE;
> + output_fmts[1] = MEDIA_BUS_FMT_RGB888_2X12_BE;
So mt8183 does not support MEDIA_BUS_FMT_RGB888_1X24?
> + *num_output_fmts = 2;
> + } else {
> + output_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
> + *num_output_fmts = 1;
> + }
> +
> + return output_fmts;
> +}
> +
> +#define MAX_INPUT_SEL_FORMATS 1
> +
> +static u32 *mtk_dpi_bridge_atomic_get_input_bus_fmts(struct drm_bridge
> *bridge,
> + struct drm_bridge_state *bridge_state,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state,
> + u32 output_fmt,
> + unsigned int *num_input_fmts)
> +{
> + u32 *input_fmts;
> +
> + *num_input_fmts = 0;
> +
> + input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts),
> + GFP_KERNEL);
> + if (!input_fmts)
> + return NULL;
> +
> + *num_input_fmts = 1;
> + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
> +
> + return input_fmts;
> +}
> +
> +static int mtk_dpi_bridge_atomic_check(struct drm_bridge *bridge,
> + struct drm_bridge_state *bridge_state,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state)
> +{
> + struct mtk_dpi *dpi = bridge->driver_private;
> +
> + dpi->out_bus_format = bridge_state->output_bus_cfg.format;
> +
> + dpi->in_bus_format = bridge_state->input_bus_cfg.format;
> +
> + dev_dbg(dpi->dev, "input format 0x%04x, output format 0x%04x\n",
> + bridge_state->input_bus_cfg.format,
> + bridge_state->output_bus_cfg.format);
> +
> + if (dpi->out_bus_format == MEDIA_BUS_FMT_RGB888_2X12_LE ||
> + dpi->out_bus_format == MEDIA_BUS_FMT_RGB888_2X12_BE) {
I think you could remove this 'if' checking.
Regards,
CK.
> + dpi->ddr_edge_sel =
> + (dpi->out_bus_format == MEDIA_BUS_FMT_RGB888_2X12_LE) ?
> + true : false;
> + }
> +
> + dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
> + dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
> + dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
> + dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> +
> + return 0;
> +}
> +
> static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
> enum drm_bridge_attach_flags flags)
> {
> @@ -572,6 +660,9 @@ static const struct drm_bridge_funcs mtk_dpi_bridge_funcs
> = {
> .mode_set = mtk_dpi_bridge_mode_set,
> .disable = mtk_dpi_bridge_disable,
> .enable = mtk_dpi_bridge_enable,
> + .atomic_check = mtk_dpi_bridge_atomic_check,
> + .atomic_get_output_bus_fmts = mtk_dpi_bridge_atomic_get_output_bus_fmts,
> + .atomic_get_input_bus_fmts = mtk_dpi_bridge_atomic_get_input_bus_fmts,
> };
>
> static void mtk_dpi_start(struct mtk_ddp_comp *comp)
> @@ -621,11 +712,6 @@ static int mtk_dpi_bind(struct device *dev, struct
> device *master, void *data)
> goto err_cleanup;
> }
>
> - dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
> - dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
> - dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
> - dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> -
> return 0;
>
> err_cleanup:
