remove commented 5G code block in hal/hal_com_phycfg.c
Signed-off-by: Fabio Aiuto <fabioaiut...@gmail.com>
---
.../staging/rtl8723bs/hal/hal_com_phycfg.c | 20 -------------------
1 file changed, 20 deletions(-)
diff --git a/drivers/staging/rtl8723bs/hal/hal_com_phycfg.c
b/drivers/staging/rtl8723bs/hal/hal_com_phycfg.c
index 9b16265b543d..a7ecdf501a14 100644
--- a/drivers/staging/rtl8723bs/hal/hal_com_phycfg.c
+++ b/drivers/staging/rtl8723bs/hal/hal_com_phycfg.c
@@ -1780,26 +1780,6 @@ s8 phy_get_tx_pwr_lmt(struct adapter *adapter, u32
reg_pwr_tbl_sel,
DBG_871X("No power limit table of the specified band\n");
}
- /* combine 5G VHT & HT rate */
- /* 5G 20M and 40M HT and VHT can cross reference */
- /*
- if (band_type == BAND_ON_5G && pwr_lmt == MAX_POWER_INDEX) {
- if (idx_bandwidth == 0 || idx_bandwidth == 1) {
- RT_TRACE(COMP_INIT, DBG_LOUD, ("No power limit table of
the specified band %d, bandwidth %d, ratesection %d, rf path %d\n",
- idx_band, idx_bandwidth,
- idx_rate_sctn, rf_path));
- if (idx_rate_sctn == 2)
- pwr_lmt =
hal_data->TxPwrLimit_5G[idx_regulation][idx_bandwidth][4][idx_channel][rf_path];
- else if (idx_rate_sctn == 4)
- pwr_lmt =
hal_data->TxPwrLimit_5G[idx_regulation][idx_bandwidth][2][idx_channel][rf_path];
- else if (idx_rate_sctn == 3)
- pwr_lmt =
hal_data->TxPwrLimit_5G[idx_regulation][idx_bandwidth][5][idx_channel][rf_path];
- else if (idx_rate_sctn == 5)
- pwr_lmt =
hal_data->TxPwrLimit_5G[idx_regulation][idx_bandwidth][3][idx_channel][rf_path];
- }
- }
- */
-
/* DBG_871X("TxPwrLmt[Regulation %d][Band %d][BW %d][RFPath %d][Rate
0x%x][Chnl %d] = %d\n", */
/* idx_regulation, hal_data->CurrentBandType, bandwidth,
rf_path, data_rate, channel, pwr_lmt); */
return pwr_lmt;
--
2.20.1
