remove all RT_TRACE logs
Signed-off-by: Fabio Aiuto <fabioaiut...@gmail.com>
---
drivers/staging/rtl8723bs/hal/sdio_halinit.c | 30 --------------------
1 file changed, 30 deletions(-)
diff --git a/drivers/staging/rtl8723bs/hal/sdio_halinit.c
b/drivers/staging/rtl8723bs/hal/sdio_halinit.c
index b1c4bbf29790..8bfe807d89f1 100644
--- a/drivers/staging/rtl8723bs/hal/sdio_halinit.c
+++ b/drivers/staging/rtl8723bs/hal/sdio_halinit.c
@@ -57,11 +57,6 @@ u8 _InitPowerOn_8723BS(struct adapter *padapter)
/* only cmd52 can be used before power on(card enable) */
ret = CardEnable(padapter);
if (!ret) {
- RT_TRACE(
- _module_hci_hal_init_c_,
- _drv_emerg_,
- ("%s: run power on flow fail\n", __func__)
- );
return _FAIL;
}
@@ -680,7 +675,6 @@ static u32 rtl8723bs_hal_init(struct adapter *padapter)
ret = _InitPowerOn_8723BS(padapter);
if (_FAIL == ret) {
- RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init
Power On!\n"));
return _FAIL;
}
@@ -688,12 +682,10 @@ static u32 rtl8723bs_hal_init(struct adapter *padapter)
ret = rtl8723b_FirmwareDownload(padapter, false);
if (ret != _SUCCESS) {
- RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("%s: Download
Firmware failed!!\n", __func__));
padapter->bFWReady = false;
pHalData->fw_ractrl = false;
return ret;
} else {
- RT_TRACE(_module_hci_hal_init_c_, _drv_notice_,
("rtl8723bs_hal_init(): Download Firmware Success!!\n"));
padapter->bFWReady = true;
pHalData->fw_ractrl = true;
}
@@ -719,7 +711,6 @@ static u32 rtl8723bs_hal_init(struct adapter *padapter)
#if (HAL_MAC_ENABLE == 1)
ret = PHY_MACConfig8723B(padapter);
if (ret != _SUCCESS) {
- RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
("Initializepadapter8192CSdio(): Fail to configure MAC!!\n"));
return ret;
}
#endif
@@ -729,7 +720,6 @@ static u32 rtl8723bs_hal_init(struct adapter *padapter)
#if (HAL_BB_ENABLE == 1)
ret = PHY_BBConfig8723B(padapter);
if (ret != _SUCCESS) {
- RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
("Initializepadapter8192CSdio(): Fail to configure BB!!\n"));
return ret;
}
#endif
@@ -741,7 +731,6 @@ static u32 rtl8723bs_hal_init(struct adapter *padapter)
#if (HAL_RF_ENABLE == 1)
ret = PHY_RFConfig8723B(padapter);
if (ret != _SUCCESS) {
- RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
("Initializepadapter8192CSdio(): Fail to configure RF!!\n"));
return ret;
}
#endif
@@ -893,8 +882,6 @@ static u32 rtl8723bs_hal_init(struct adapter *padapter)
/* Init BT hw config. */
hal_btcoex_InitHwConfig(padapter, false);
- RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("-%s\n", __func__));
-
return _SUCCESS;
}
@@ -1030,10 +1017,6 @@ static u32 rtl8723bs_inirp_init(struct adapter *padapter)
static u32 rtl8723bs_inirp_deinit(struct adapter *padapter)
{
- RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
("+rtl8723bs_inirp_deinit\n"));
-
- RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
("-rtl8723bs_inirp_deinit\n"));
-
return _SUCCESS;
}
@@ -1132,8 +1115,6 @@ static void Hal_EfuseParseMACAddr_8723BS(
}
/* NicIFSetMacAddress(padapter, padapter->PermanentAddress); */
- RT_TRACE(_module_hci_hal_init_c_, _drv_notice_,
- ("Hal_EfuseParseMACAddr_8723BS: Permanent Address = %pM\n",
pEEPROM->mac_addr));
}
static void Hal_EfuseParseBoardType_8723BS(
@@ -1148,7 +1129,6 @@ static void Hal_EfuseParseBoardType_8723BS(
pHalData->BoardType = (EEPROM_DEFAULT_BOARD_OPTION &
0xE0) >> 5;
} else
pHalData->BoardType = 0;
- RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("Board Type: 0x%2x\n",
pHalData->BoardType));
}
static void _ReadEfuseInfo8723BS(struct adapter *padapter)
@@ -1156,7 +1136,6 @@ static void _ReadEfuseInfo8723BS(struct adapter *padapter)
struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter);
u8 *hwinfo = NULL;
- RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
("====>_ReadEfuseInfo8723BS()\n"));
/* */
/* This part read and parse the eeprom/efuse content */
@@ -1192,7 +1171,6 @@ static void _ReadEfuseInfo8723BS(struct adapter *padapter)
Hal_ReadRFGainOffset(padapter, hwinfo, pEEPROM->bautoload_fail_flag);
- RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("<====
_ReadEfuseInfo8723BS()\n"));
}
static void _ReadPROMContent(struct adapter *padapter)
@@ -1205,12 +1183,6 @@ static void _ReadPROMContent(struct adapter *padapter)
pEEPROM->EepromOrEfuse = (eeValue & BOOT_FROM_EEPROM) ? true : false;
pEEPROM->bautoload_fail_flag = (eeValue & EEPROM_EN) ? false : true;
- RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
- ("%s: 9346CR = 0x%02X, Boot from %s, Autoload %s\n",
- __func__, eeValue,
- (pEEPROM->EepromOrEfuse ? "EEPROM" : "EFUSE"),
- (pEEPROM->bautoload_fail_flag ? "Fail" : "OK")));
-
/* pHalData->EEType = IS_BOOT_FROM_EEPROM(Adapter) ? EEPROM_93C46 :
EEPROM_BOOT_EFUSE; */
_ReadEfuseInfo8723BS(padapter);
@@ -1233,8 +1205,6 @@ static s32 _ReadAdapterInfo8723BS(struct adapter
*padapter)
u8 val8;
unsigned long start;
- RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
("+_ReadAdapterInfo8723BS\n"));
-
/* before access eFuse, make sure card enable has been called */
if (!padapter->hw_init_completed)
_InitPowerOn_8723BS(padapter);
--
2.20.1
