On Tue, Apr 6, 2021 at 8:47 AM Alex Ghiti <a...@ghiti.fr> wrote: > > Hi Vitaly, > > Le 4/5/21 à 4:34 AM, Vitaly Wool a écrit : > > On Sun, Apr 4, 2021 at 10:39 AM Vitaly Wool <vitaly.w...@konsulko.com> > > wrote: > >> > >> On Sat, Apr 3, 2021 at 12:00 PM Alex Ghiti <a...@ghiti.fr> wrote: > >>> > >>> Hi Vitaly, > >>> > >>> Le 4/1/21 à 7:10 AM, Alex Ghiti a écrit : > >>>> Le 4/1/21 à 4:52 AM, Vitaly Wool a écrit : > >>>>> Hi Alex, > >>>>> > >>>>> On Thu, Apr 1, 2021 at 10:11 AM Alex Ghiti <a...@ghiti.fr> wrote: > >>>>>> > >>>>>> Hi, > >>>>>> > >>>>>> Le 3/30/21 à 4:04 PM, Alex Ghiti a écrit : > >>>>>>> Le 3/30/21 à 3:33 PM, Palmer Dabbelt a écrit : > >>>>>>>> On Tue, 30 Mar 2021 11:39:10 PDT (-0700), a...@ghiti.fr wrote: > >>>>>>>>> > >>>>>>>>> > >>>>>>>>> Le 3/30/21 à 2:26 AM, Vitaly Wool a écrit : > >>>>>>>>>> On Tue, Mar 30, 2021 at 8:23 AM Palmer Dabbelt > >>>>>>>>>> <palmerdabb...@google.com> wrote: > >>>>>>>>>>> > >>>>>>>>>>> On Sun, 21 Mar 2021 17:12:15 PDT (-0700), vitaly.w...@konsulko.com > >>>>>>>>>>> wrote: > >>>>>>>>>>>> Introduce XIP (eXecute In Place) support for RISC-V platforms. > >>>>>>>>>>>> It allows code to be executed directly from non-volatile storage > >>>>>>>>>>>> directly addressable by the CPU, such as QSPI NOR flash which can > >>>>>>>>>>>> be found on many RISC-V platforms. This makes way for significant > >>>>>>>>>>>> optimization of RAM footprint. The XIP kernel is not compressed > >>>>>>>>>>>> since it has to run directly from flash, so it will occupy more > >>>>>>>>>>>> space on the non-volatile storage. The physical flash address > >>>>>>>>>>>> used > >>>>>>>>>>>> to link the kernel object files and for storing it has to be > >>>>>>>>>>>> known > >>>>>>>>>>>> at compile time and is represented by a Kconfig option. > >>>>>>>>>>>> > >>>>>>>>>>>> XIP on RISC-V will for the time being only work on MMU-enabled > >>>>>>>>>>>> kernels. > >>>>>>>>>>>> > >>>>>>>>>>>> Signed-off-by: Vitaly Wool <vitaly.w...@konsulko.com> > >>>>>>>>>>>> > >>>>>>>>>>>> --- > >>>>>>>>>>>> > >>>>>>>>>>>> Changes in v2: > >>>>>>>>>>>> - dedicated macro for XIP address fixup when MMU is not enabled > >>>>>>>>>>>> yet > >>>>>>>>>>>> o both for 32-bit and 64-bit RISC-V > >>>>>>>>>>>> - SP is explicitly set to a safe place in RAM before > >>>>>>>>>>>> __copy_data call > >>>>>>>>>>>> - removed redundant alignment requirements in vmlinux-xip.lds.S > >>>>>>>>>>>> - changed long -> uintptr_t typecast in __XIP_FIXUP macro. > >>>>>>>>>>>> Changes in v3: > >>>>>>>>>>>> - rebased against latest for-next > >>>>>>>>>>>> - XIP address fixup macro now takes an argument > >>>>>>>>>>>> - SMP related fixes > >>>>>>>>>>>> Changes in v4: > >>>>>>>>>>>> - rebased against the current for-next > >>>>>>>>>>>> - less #ifdef's in C/ASM code > >>>>>>>>>>>> - dedicated XIP_FIXUP_OFFSET assembler macro in head.S > >>>>>>>>>>>> - C-specific definitions moved into #ifndef __ASSEMBLY__ > >>>>>>>>>>>> - Fixed multi-core boot > >>>>>>>>>>>> Changes in v5: > >>>>>>>>>>>> - fixed build error for non-XIP kernels > >>>>>>>>>>>> Changes in v6: > >>>>>>>>>>>> - XIP_PHYS_RAM_BASE config option renamed to PHYS_RAM_BASE > >>>>>>>>>>>> - added PHYS_RAM_BASE_FIXED config flag to allow usage of > >>>>>>>>>>>> PHYS_RAM_BASE in non-XIP configurations if needed > >>>>>>>>>>>> - XIP_FIXUP macro rewritten with a tempoarary variable to avoid > >>>>>>>>>>>> side > >>>>>>>>>>>> effects > >>>>>>>>>>>> - fixed crash for non-XIP kernels that don't use built-in DTB > >>>>>>>>>>> > >>>>>>>>>>> So v5 landed on for-next, which generally means it's best to avoid > >>>>>>>>>>> re-spinning the patch and instead send along fixups. That said, > >>>>>>>>>>> the v5 > >>>>>>>>>>> is causing some testing failures for me. > >>>>>>>>>>> > >>>>>>>>>>> I'm going to drop the v5 for now as I don't have time to test this > >>>>>>>>>>> tonight. I'll try and take a look soon, as it will conflict with > >>>>>>>>>>> Alex's > >>>>>>>>>>> patches. > >>>>>>>>>> > >>>>>>>>>> I can come up with the incremental patch instead pretty much > >>>>>>>>>> straight > >>>>>>>>>> away if that works better. > >>>>>>>>>> > >>>>>>>>>> ~Vitaly > >>>>>>>>>> > >>>>>>>>>>>> arch/riscv/Kconfig | 49 ++++++++++- > >>>>>>>>>>>> arch/riscv/Makefile | 8 +- > >>>>>>>>>>>> arch/riscv/boot/Makefile | 13 +++ > >>>>>>>>>>>> arch/riscv/include/asm/pgtable.h | 65 ++++++++++++-- > >>>>>>>>>>>> arch/riscv/kernel/cpu_ops_sbi.c | 11 ++- > >>>>>>>>>>>> arch/riscv/kernel/head.S | 49 ++++++++++- > >>>>>>>>>>>> arch/riscv/kernel/head.h | 3 + > >>>>>>>>>>>> arch/riscv/kernel/setup.c | 8 +- > >>>>>>>>>>>> arch/riscv/kernel/vmlinux-xip.lds.S | 132 > >>>>>>>>>>>> ++++++++++++++++++++++++++++ > >>>>>>>>>>>> arch/riscv/kernel/vmlinux.lds.S | 6 ++ > >>>>>>>>>>>> arch/riscv/mm/init.c | 100 > >>>>>>>>>>>> +++++++++++++++++++-- > >>>>>>>>>>>> 11 files changed, 426 insertions(+), 18 deletions(-) > >>>>>>>>>>>> create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S > >>>>>>>>>>>> > >>>>>>>>>>>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig > >>>>>>>>>>>> index 8ea60a0a19ae..bd6f82240c34 100644 > >>>>>>>>>>>> --- a/arch/riscv/Kconfig > >>>>>>>>>>>> +++ b/arch/riscv/Kconfig > >>>>>>>>>>>> @@ -441,7 +441,7 @@ config EFI_STUB > >>>>>>>>>>>> > >>>>>>>>>>>> config EFI > >>>>>>>>>>>> bool "UEFI runtime support" > >>>>>>>>>>>> - depends on OF > >>>>>>>>>>>> + depends on OF && !XIP_KERNEL > >>>>>>>>>>>> select LIBFDT > >>>>>>>>>>>> select UCS2_STRING > >>>>>>>>>>>> select EFI_PARAMS_FROM_FDT > >>>>>>>>>>>> @@ -465,11 +465,56 @@ config STACKPROTECTOR_PER_TASK > >>>>>>>>>>>> def_bool y > >>>>>>>>>>>> depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS > >>>>>>>>>>>> > >>>>>>>>>>>> +config PHYS_RAM_BASE_FIXED > >>>>>>>>>>>> + bool "Explicitly specified physical RAM address" > >>>>>>>>>>>> + default n > >>>>>>>>>>>> + > >>>>>>>>>>>> +config PHYS_RAM_BASE > >>>>>>>>>>>> + hex "Platform Physical RAM address" > >>>>>>>>>>>> + depends on PHYS_RAM_BASE_FIXED > >>>>>>>>>>>> + default "0x80000000" > >>>>>>>>>>>> + help > >>>>>>>>>>>> + This is the physical address of RAM in the system. It has > >>>>>>>>>>>> to be > >>>>>>>>>>>> + explicitly specified to run early relocations of > >>>>>>>>>>>> read-write data > >>>>>>>>>>>> + from flash to RAM. > >>>>>>>>>>>> + > >>>>>>>>>>>> +config XIP_KERNEL > >>>>>>>>>>>> + bool "Kernel Execute-In-Place from ROM" > >>>>>>>>>>>> + depends on MMU > >>>>>>>>>>>> + select PHYS_RAM_BASE_FIXED > >>>>>>>>>>>> + help > >>>>>>>>>>>> + Execute-In-Place allows the kernel to run from > >>>>>>>>>>>> non-volatile storage > >>>>>>>>>>>> + directly addressable by the CPU, such as NOR flash. This > >>>>>>>>>>>> saves RAM > >>>>>>>>>>>> + space since the text section of the kernel is not loaded > >>>>>>>>>>>> from flash > >>>>>>>>>>>> + to RAM. Read-write sections, such as the data section > >>>>>>>>>>>> and > >>>>>>>>>>>> stack, > >>>>>>>>>>>> + are still copied to RAM. The XIP kernel is not > >>>>>>>>>>>> compressed > >>>>>>>>>>>> since > >>>>>>>>>>>> + it has to run directly from flash, so it will take more > >>>>>>>>>>>> space to > >>>>>>>>>>>> + store it. The flash address used to link the kernel > >>>>>>>>>>>> object files, > >>>>>>>>>>>> + and for storing it, is configuration dependent. > >>>>>>>>>>>> Therefore, > >>>>>>>>>>>> if you > >>>>>>>>>>>> + say Y here, you must know the proper physical address > >>>>>>>>>>>> where to > >>>>>>>>>>>> + store the kernel image depending on your own flash memory > >>>>>>>>>>>> usage. > >>>>>>>>>>>> + > >>>>>>>>>>>> + Also note that the make target becomes "make xipImage" > >>>>>>>>>>>> rather than > >>>>>>>>>>>> + "make zImage" or "make Image". The final kernel binary > >>>>>>>>>>>> to > >>>>>>>>>>>> put in > >>>>>>>>>>>> + ROM memory will be arch/riscv/boot/xipImage. > >>>>>>>>>>>> + > >>>>>>>>>>>> + If unsure, say N. > >>>>>>>>>>>> + > >>>>>>>>>>>> +config XIP_PHYS_ADDR > >>>>>>>>>>>> + hex "XIP Kernel Physical Location" > >>>>>>>>>>>> + depends on XIP_KERNEL > >>>>>>>>>>>> + default "0x21000000" > >>>>>>>>>>>> + help > >>>>>>>>>>>> + This is the physical address in your flash memory the > >>>>>>>>>>>> kernel will > >>>>>>>>>>>> + be linked for and stored to. This address is dependent > >>>>>>>>>>>> on > >>>>>>>>>>>> your > >>>>>>>>>>>> + own flash usage. > >>>>>>>>>>>> + > >>>>>>>>>>>> endmenu > >>>>>>>>>>>> > >>>>>>>>>>>> config BUILTIN_DTB > >>>>>>>>>>>> - def_bool n > >>>>>>>>>>>> + bool > >>>>>>>>>>>> depends on OF > >>>>>>>>>>>> + default y if XIP_KERNEL > >>>>>>>>>>>> > >>>>>>>>>>>> menu "Power management options" > >>>>>>>>>>>> > >>>>>>>>>>>> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile > >>>>>>>>>>>> index 1368d943f1f3..8fcbec03974d 100644 > >>>>>>>>>>>> --- a/arch/riscv/Makefile > >>>>>>>>>>>> +++ b/arch/riscv/Makefile > >>>>>>>>>>>> @@ -82,7 +82,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS) > >>>>>>>>>>>> > >>>>>>>>>>>> # Default target when executing plain make > >>>>>>>>>>>> boot := arch/riscv/boot > >>>>>>>>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y) > >>>>>>>>>>>> +KBUILD_IMAGE := $(boot)/xipImage > >>>>>>>>>>>> +else > >>>>>>>>>>>> KBUILD_IMAGE := $(boot)/Image.gz > >>>>>>>>>>>> +endif > >>>>>>>>>>>> > >>>>>>>>>>>> head-y := arch/riscv/kernel/head.o > >>>>>>>>>>>> > >>>>>>>>>>>> @@ -95,12 +99,14 @@ PHONY += vdso_install > >>>>>>>>>>>> vdso_install: > >>>>>>>>>>>> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@ > >>>>>>>>>>>> > >>>>>>>>>>>> +ifneq ($(CONFIG_XIP_KERNEL),y) > >>>>>>>>>>>> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy) > >>>>>>>>>>>> KBUILD_IMAGE := $(boot)/loader.bin > >>>>>>>>>>>> else > >>>>>>>>>>>> KBUILD_IMAGE := $(boot)/Image.gz > >>>>>>>>>>>> endif > >>>>>>>>>>>> -BOOT_TARGETS := Image Image.gz loader loader.bin > >>>>>>>>>>>> +endif > >>>>>>>>>>>> +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage > >>>>>>>>>>>> > >>>>>>>>>>>> all: $(notdir $(KBUILD_IMAGE)) > >>>>>>>>>>>> > >>>>>>>>>>>> diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile > >>>>>>>>>>>> index 03404c84f971..6bf299f70c27 100644 > >>>>>>>>>>>> --- a/arch/riscv/boot/Makefile > >>>>>>>>>>>> +++ b/arch/riscv/boot/Makefile > >>>>>>>>>>>> @@ -17,8 +17,21 @@ > >>>>>>>>>>>> KCOV_INSTRUMENT := n > >>>>>>>>>>>> > >>>>>>>>>>>> OBJCOPYFLAGS_Image :=-O binary -R .note -R > >>>>>>>>>>>> .note.gnu.build-id -R > >>>>>>>>>>>> .comment -S > >>>>>>>>>>>> +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id > >>>>>>>>>>>> -R .comment -S > >>>>>>>>>>>> > >>>>>>>>>>>> targets := Image Image.* loader loader.o loader.lds > >>>>>>>>>>>> loader.bin > >>>>>>>>>>>> +targets := Image Image.* loader loader.o loader.lds loader.bin > >>>>>>>>>>>> xipImage > >>>>>>>>>>>> + > >>>>>>>>>>>> +ifeq ($(CONFIG_XIP_KERNEL),y) > >>>>>>>>>>>> + > >>>>>>>>>>>> +quiet_cmd_mkxip = $(quiet_cmd_objcopy) > >>>>>>>>>>>> +cmd_mkxip = $(cmd_objcopy) > >>>>>>>>>>>> + > >>>>>>>>>>>> +$(obj)/xipImage: vmlinux FORCE > >>>>>>>>>>>> + $(call if_changed,mkxip) > >>>>>>>>>>>> + @$(kecho) ' Physical Address of xipImage: > >>>>>>>>>>>> $(CONFIG_XIP_PHYS_ADDR)' > >>>>>>>>>>>> + > >>>>>>>>>>>> +endif > >>>>>>>>>>>> > >>>>>>>>>>>> $(obj)/Image: vmlinux FORCE > >>>>>>>>>>>> $(call if_changed,objcopy) > >>>>>>>>>>>> diff --git a/arch/riscv/include/asm/pgtable.h > >>>>>>>>>>>> b/arch/riscv/include/asm/pgtable.h > >>>>>>>>>>>> index ebf817c1bdf4..21a9b2f8d1c7 100644 > >>>>>>>>>>>> --- a/arch/riscv/include/asm/pgtable.h > >>>>>>>>>>>> +++ b/arch/riscv/include/asm/pgtable.h > >>>>>>>>>>>> @@ -11,6 +11,33 @@ > >>>>>>>>>>>> > >>>>>>>>>>>> #include <asm/pgtable-bits.h> > >>>>>>>>>>>> > >>>>>>>>>>>> +#ifdef CONFIG_MMU > >>>>>>>>>>>> + > >>>>>>>>>>>> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) > >>>>>>>>>>>> + > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> +#define VMALLOC_SIZE ((KERN_VIRT_SIZE >> 1) - SZ_16M) > >>>>>>>>>>>> +#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1) > >>>>>>>>>>>> + > >>>>>>>>>>>> +#define XIP_OFFSET SZ_8M > >>>>>>>>>>>> +#define XIP_MASK (SZ_8M - 1) > >>>>>>>>>>>> +#define XIP_VIRT_ADDR(physaddr) \ > >>>>>>>>>>>> + (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK)) > >>>>>>>>>>>> + > >>>>>>>>>>>> +#else > >>>>>>>>>>>> + > >>>>>>>>>>>> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1) > >>>>>>>>>>>> +#define VMALLOC_END (PAGE_OFFSET - 1) > >>>>>>>>>>>> + > >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */ > >>>>>>>>>>>> + > >>>>>>>>>>>> +#else > >>>>>>>>>>>> + > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> +#define XIP_VIRT_ADDR(physaddr) (physaddr) > >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */ > >>>>>>>>>>>> +#endif /* CONFIG_MMU */ > >>>>>>>>>>>> + > >>>>>>>>>>>> #ifndef __ASSEMBLY__ > >>>>>>>>>>>> > >>>>>>>>>>>> /* Page Upper Directory not used in RISC-V */ > >>>>>>>>>>>> @@ -21,9 +48,25 @@ > >>>>>>>>>>>> > >>>>>>>>>>>> #ifdef CONFIG_MMU > >>>>>>>>>>>> > >>>>>>>>>>>> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1) > >>>>>>>>>>>> -#define VMALLOC_END (PAGE_OFFSET - 1) > >>>>>>>>>>>> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE) > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> +/* > >>>>>>>>>>>> + * Since we use sections to map it, this macro replaces the > >>>>>>>>>>>> physical address > >>>>>>>>>>>> + * with its virtual address while keeping offset from the base > >>>>>>>>>>>> section. > >>>>>>>>>>>> + */ > >>>>>>>>>>>> +#define XIP_PHYS_ADDR(va) \ > >>>>>>>>>>>> + ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET + > >>>>>>>>>>>> CONFIG_XIP_PHYS_ADDR) > >>>>>>>>>>>> + > >>>>>>>>>>>> +#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) > >>>>>>>>>>>> + > >>>>>>>>>>>> +#define XIP_FIXUP(addr) ({ \ > >>>>>>>>>>>> + uintptr_t __a = (uintptr_t)(addr); \ > >>>>>>>>>>>> + (__a >= CONFIG_XIP_PHYS_ADDR && \ > >>>>>>>>>>>> + __a < CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \ > >>>>>>>>>>>> + __a - CONFIG_XIP_PHYS_ADDR + CONFIG_PHYS_RAM_BASE - > >>>>>>>>>>>> XIP_OFFSET : __a; \ > >>>>>>>>>>>> +}) > >>>>>>>>>>>> +#else > >>>>>>>>>>>> +#define XIP_FIXUP(addr) (addr) > >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */ > >>>>>>>>>>>> > >>>>>>>>>>>> #define BPF_JIT_REGION_SIZE (SZ_128M) > >>>>>>>>>>>> #define BPF_JIT_REGION_START (PAGE_OFFSET - > >>>>>>>>>>>> BPF_JIT_REGION_SIZE) > >>>>>>>>>>>> @@ -484,8 +527,20 @@ static inline int > >>>>>>>>>>>> ptep_clear_flush_young(struct vm_area_struct *vma, > >>>>>>>>>>>> > >>>>>>>>>>>> #define kern_addr_valid(addr) (1) /* FIXME */ > >>>>>>>>>>>> > >>>>>>>>>>>> -extern void *dtb_early_va; > >>>>>>>>>>>> -extern uintptr_t dtb_early_pa; > >>>>>>>>>>>> +extern void *_dtb_early_va; > >>>>>>>>>>>> +extern uintptr_t _dtb_early_pa; > >>>>>>>>>>>> +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU) > >>>>>>>>>>>> + > >>>>>>>>>>>> +#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va)) > >>>>>>>>>>>> +#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa)) > >>>>>>>>>>>> + > >>>>>>>>>>>> +#else > >>>>>>>>>>>> + > >>>>>>>>>>>> +#define dtb_early_va _dtb_early_va > >>>>>>>>>>>> +#define dtb_early_pa _dtb_early_pa > >>>>>>>>>>>> + > >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */ > >>>>>>>>>>>> + > >>>>>>>>>>>> void setup_bootmem(void); > >>>>>>>>>>>> void paging_init(void); > >>>>>>>>>>>> void misc_mem_init(void); > >>>>>>>>>>>> diff --git a/arch/riscv/kernel/cpu_ops_sbi.c > >>>>>>>>>>>> b/arch/riscv/kernel/cpu_ops_sbi.c > >>>>>>>>>>>> index 685fae72b7f5..2413c2997350 100644 > >>>>>>>>>>>> --- a/arch/riscv/kernel/cpu_ops_sbi.c > >>>>>>>>>>>> +++ b/arch/riscv/kernel/cpu_ops_sbi.c > >>>>>>>>>>>> @@ -53,10 +53,19 @@ static int sbi_hsm_hart_get_status(unsigned > >>>>>>>>>>>> long hartid) > >>>>>>>>>>>> } > >>>>>>>>>>>> #endif > >>>>>>>>>>>> > >>>>>>>>>>>> +static inline unsigned long get_secondary_start_phys(void) > >>>>>>>>>>>> +{ > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> + return XIP_PHYS_ADDR(secondary_start_sbi); > >>>>>>>>>>>> +#else > >>>>>>>>>>>> + return __pa_symbol(secondary_start_sbi); > >>>>>>>>>>>> +#endif > >>>>>>>>>>>> +} > >>>>>>>>>>>> + > >>>>>>>>>>>> static int sbi_cpu_start(unsigned int cpuid, struct > >>>>>>>>>>>> task_struct > >>>>>>>>>>>> *tidle) > >>>>>>>>>>>> { > >>>>>>>>>>>> int rc; > >>>>>>>>>>>> - unsigned long boot_addr = __pa_symbol(secondary_start_sbi); > >>>>>>>>>>>> + unsigned long boot_addr = get_secondary_start_phys(); > >>>>>>>>>>>> int hartid = cpuid_to_hartid_map(cpuid); > >>>>>>>>>>>> > >>>>>>>>>>>> cpu_update_secondary_bootdata(cpuid, tidle); > >>>>>>>>>>>> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S > >>>>>>>>>>>> index f5a9bad86e58..bbe74e37914f 100644 > >>>>>>>>>>>> --- a/arch/riscv/kernel/head.S > >>>>>>>>>>>> +++ b/arch/riscv/kernel/head.S > >>>>>>>>>>>> @@ -9,11 +9,23 @@ > >>>>>>>>>>>> #include <linux/linkage.h> > >>>>>>>>>>>> #include <asm/thread_info.h> > >>>>>>>>>>>> #include <asm/page.h> > >>>>>>>>>>>> +#include <asm/pgtable.h> > >>>>>>>>>>>> #include <asm/csr.h> > >>>>>>>>>>>> #include <asm/hwcap.h> > >>>>>>>>>>>> #include <asm/image.h> > >>>>>>>>>>>> #include "efi-header.S" > >>>>>>>>>>>> > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> +.macro XIP_FIXUP_OFFSET reg > >>>>>>>>>>>> + REG_L t0, _xip_fixup > >>>>>>>>>>>> + add \reg, \reg, t0 > >>>>>>>>>>>> +.endm > >>>>>>>>>>>> +_xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - > >>>>>>>>>>>> XIP_OFFSET > >>>>>>>>>>>> +#else > >>>>>>>>>>>> +.macro XIP_FIXUP_OFFSET reg > >>>>>>>>>>>> +.endm > >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */ > >>>>>>>>>>>> + > >>>>>>>>>>>> __HEAD > >>>>>>>>>>>> ENTRY(_start) > >>>>>>>>>>>> /* > >>>>>>>>>>>> @@ -69,7 +81,11 @@ pe_head_start: > >>>>>>>>>>>> #ifdef CONFIG_MMU > >>>>>>>>>>>> relocate: > >>>>>>>>>>>> /* Relocate return address */ > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> + li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) > >>>>>>>>>>>> +#else > >>>>>>>>>>>> li a1, PAGE_OFFSET > >>>>>>>>>>>> +#endif > >>>>>>>>>>>> la a2, _start > >>>>>>>>>>>> sub a1, a1, a2 > >>>>>>>>>>>> add ra, ra, a1 > >>>>>>>>>>>> @@ -91,6 +107,7 @@ relocate: > >>>>>>>>>>>> * to ensure the new translations are in use. > >>>>>>>>>>>> */ > >>>>>>>>>>>> la a0, trampoline_pg_dir > >>>>>>>>>>>> + XIP_FIXUP_OFFSET a0 > >>>>>>>>>>>> srl a0, a0, PAGE_SHIFT > >>>>>>>>>>>> or a0, a0, a1 > >>>>>>>>>>>> sfence.vma > >>>>>>>>>>>> @@ -144,7 +161,9 @@ secondary_start_sbi: > >>>>>>>>>>>> > >>>>>>>>>>>> slli a3, a0, LGREG > >>>>>>>>>>>> la a4, __cpu_up_stack_pointer > >>>>>>>>>>>> + XIP_FIXUP_OFFSET a4 > >>>>>>>>>>>> la a5, __cpu_up_task_pointer > >>>>>>>>>>>> + XIP_FIXUP_OFFSET a5 > >>>>>>>>>>>> add a4, a3, a4 > >>>>>>>>>>>> add a5, a3, a5 > >>>>>>>>>>>> REG_L sp, (a4) > >>>>>>>>>>>> @@ -156,6 +175,7 @@ secondary_start_common: > >>>>>>>>>>>> #ifdef CONFIG_MMU > >>>>>>>>>>>> /* Enable virtual memory and relocate to virtual > >>>>>>>>>>>> address */ > >>>>>>>>>>>> la a0, swapper_pg_dir > >>>>>>>>>>>> + XIP_FIXUP_OFFSET a0 > >>>>>>>>>>>> call relocate > >>>>>>>>>>>> #endif > >>>>>>>>>>>> call setup_trap_vector > >>>>>>>>>>>> @@ -236,12 +256,33 @@ pmp_done: > >>>>>>>>>>>> .Lgood_cores: > >>>>>>>>>>>> #endif > >>>>>>>>>>>> > >>>>>>>>>>>> +#ifndef CONFIG_XIP_KERNEL > >>>>>>>>>>>> /* Pick one hart to run the main boot sequence */ > >>>>>>>>>>>> la a3, hart_lottery > >>>>>>>>>>>> li a2, 1 > >>>>>>>>>>>> amoadd.w a3, a2, (a3) > >>>>>>>>>>>> bnez a3, .Lsecondary_start > >>>>>>>>>>>> > >>>>>>>>>>>> +#else > >>>>>>>>>>>> + /* hart_lottery in flash contains a magic number */ > >>>>>>>>>>>> + la a3, hart_lottery > >>>>>>>>>>>> + mv a2, a3 > >>>>>>>>>>>> + XIP_FIXUP_OFFSET a2 > >>>>>>>>>>>> + lw t1, (a3) > >>>>>>>>>>>> + amoswap.w t0, t1, (a2) > >>>>>>>>>>>> + /* first time here if hart_lottery in RAM is not set */ > >>>>>>>>>>>> + beq t0, t1, .Lsecondary_start > >>>>>>>>>>>> + > >>>>>>>>>>>> + la sp, _end + THREAD_SIZE > >>>>>>>>>>>> + XIP_FIXUP_OFFSET sp > >>>>>>>>>>>> + mv s0, a0 > >>>>>>>>>>>> + call __copy_data > >>>>>>>>>>>> + > >>>>>>>>>>>> + /* Restore a0 copy */ > >>>>>>>>>>>> + mv a0, s0 > >>>>>>>>>>>> +#endif > >>>>>>>>>>>> + > >>>>>>>>>>>> +#ifndef CONFIG_XIP_KERNEL > >>>>>>>>>>>> /* Clear BSS for flat non-ELF images */ > >>>>>>>>>>>> la a3, __bss_start > >>>>>>>>>>>> la a4, __bss_stop > >>>>>>>>>>>> @@ -251,15 +292,18 @@ clear_bss: > >>>>>>>>>>>> add a3, a3, RISCV_SZPTR > >>>>>>>>>>>> blt a3, a4, clear_bss > >>>>>>>>>>>> clear_bss_done: > >>>>>>>>>>>> - > >>>>>>>>>>>> +#endif > >>>>>>>>>>>> /* Save hart ID and DTB physical address */ > >>>>>>>>>>>> mv s0, a0 > >>>>>>>>>>>> mv s1, a1 > >>>>>>>>>>>> + > >>>>>>>>>>>> la a2, boot_cpu_hartid > >>>>>>>>>>>> + XIP_FIXUP_OFFSET a2 > >>>>>>>>>>>> REG_S a0, (a2) > >>>>>>>>>>>> > >>>>>>>>>>>> /* Initialize page tables and relocate to virtual > >>>>>>>>>>>> addresses */ > >>>>>>>>>>>> la sp, init_thread_union + THREAD_SIZE > >>>>>>>>>>>> + XIP_FIXUP_OFFSET sp > >>>>>>>>>>>> #ifdef CONFIG_BUILTIN_DTB > >>>>>>>>>>>> la a0, __dtb_start > >>>>>>>>>>>> #else > >>>>>>>>>>>> @@ -268,6 +312,7 @@ clear_bss_done: > >>>>>>>>>>>> call setup_vm > >>>>>>>>>>>> #ifdef CONFIG_MMU > >>>>>>>>>>>> la a0, early_pg_dir > >>>>>>>>>>>> + XIP_FIXUP_OFFSET a0 > >>>>>>>>>>>> call relocate > >>>>>>>>>>>> #endif /* CONFIG_MMU */ > >>>>>>>>>>>> > >>>>>>>>>>>> @@ -292,7 +337,9 @@ clear_bss_done: > >>>>>>>>>>>> > >>>>>>>>>>>> slli a3, a0, LGREG > >>>>>>>>>>>> la a1, __cpu_up_stack_pointer > >>>>>>>>>>>> + XIP_FIXUP_OFFSET a1 > >>>>>>>>>>>> la a2, __cpu_up_task_pointer > >>>>>>>>>>>> + XIP_FIXUP_OFFSET a2 > >>>>>>>>>>>> add a1, a3, a1 > >>>>>>>>>>>> add a2, a3, a2 > >>>>>>>>>>>> > >>>>>>>>>>>> diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h > >>>>>>>>>>>> index b48dda3d04f6..aabbc3ac3e48 100644 > >>>>>>>>>>>> --- a/arch/riscv/kernel/head.h > >>>>>>>>>>>> +++ b/arch/riscv/kernel/head.h > >>>>>>>>>>>> @@ -12,6 +12,9 @@ extern atomic_t hart_lottery; > >>>>>>>>>>>> > >>>>>>>>>>>> asmlinkage void do_page_fault(struct pt_regs *regs); > >>>>>>>>>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa); > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> +asmlinkage void __init __copy_data(void); > >>>>>>>>>>>> +#endif > >>>>>>>>>>>> > >>>>>>>>>>>> extern void *__cpu_up_stack_pointer[]; > >>>>>>>>>>>> extern void *__cpu_up_task_pointer[]; > >>>>>>>>>>>> diff --git a/arch/riscv/kernel/setup.c > >>>>>>>>>>>> b/arch/riscv/kernel/setup.c > >>>>>>>>>>>> index e85bacff1b50..a0384c72c272 100644 > >>>>>>>>>>>> --- a/arch/riscv/kernel/setup.c > >>>>>>>>>>>> +++ b/arch/riscv/kernel/setup.c > >>>>>>>>>>>> @@ -50,7 +50,11 @@ struct screen_info screen_info > >>>>>>>>>>>> __section(".data") = { > >>>>>>>>>>>> * This is used before the kernel initializes the BSS so it > >>>>>>>>>>>> can't be in the > >>>>>>>>>>>> * BSS. > >>>>>>>>>>>> */ > >>>>>>>>>>>> -atomic_t hart_lottery __section(".sdata"); > >>>>>>>>>>>> +atomic_t hart_lottery __section(".sdata") > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> += ATOMIC_INIT(0xC001BEEF) > >>>>>>>>>>>> +#endif > >>>>>>>>>>>> +; > >>>>>>>>>>>> unsigned long boot_cpu_hartid; > >>>>>>>>>>>> static DEFINE_PER_CPU(struct cpu, cpu_devices); > >>>>>>>>>>>> > >>>>>>>>>>>> @@ -254,7 +258,7 @@ void __init setup_arch(char **cmdline_p) > >>>>>>>>>>>> #if IS_ENABLED(CONFIG_BUILTIN_DTB) > >>>>>>>>>>>> unflatten_and_copy_device_tree(); > >>>>>>>>>>>> #else > >>>>>>>>>>>> - if (early_init_dt_verify(__va(dtb_early_pa))) > >>>>>>>>>>>> + if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa)))) > >>>>>>>>>>>> unflatten_device_tree(); > >>>>>>>>>>>> else > >>>>>>>>>>>> pr_err("No DTB found in kernel mappings\n"); > >>>>>>>>>>>> diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S > >>>>>>>>>>>> b/arch/riscv/kernel/vmlinux-xip.lds.S > >>>>>>>>>>>> new file mode 100644 > >>>>>>>>>>>> index 000000000000..9f0f08c34cd3 > >>>>>>>>>>>> --- /dev/null > >>>>>>>>>>>> +++ b/arch/riscv/kernel/vmlinux-xip.lds.S > >>>>>>>>>>>> @@ -0,0 +1,132 @@ > >>>>>>>>>>>> +/* SPDX-License-Identifier: GPL-2.0-only */ > >>>>>>>>>>>> +/* > >>>>>>>>>>>> + * Copyright (C) 2012 Regents of the University of California > >>>>>>>>>>>> + * Copyright (C) 2017 SiFive > >>>>>>>>>>>> + * Copyright (C) 2020 Vitaly Wool, Konsulko AB > >>>>>>>>>>>> + */ > >>>>>>>>>>>> + > >>>>>>>>>>>> +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) > >>>>>>>>>>>> +/* No __ro_after_init data in the .rodata section - which will > >>>>>>>>>>>> always be ro */ > >>>>>>>>>>>> +#define RO_AFTER_INIT_DATA > >>>>>>>>>>>> + > >>>>>>>>>>>> +#include <asm/vmlinux.lds.h> > >>>>>>>>>>>> +#include <asm/page.h> > >>>>>>>>>>>> +#include <asm/pgtable.h> > >>>>>>>>>>>> +#include <asm/cache.h> > >>>>>>>>>>>> +#include <asm/thread_info.h> > >>>>>>>>>>>> + > >>>>>>>>>>>> +OUTPUT_ARCH(riscv) > >>>>>>>>>>>> +ENTRY(_start) > >>>>>>>>>>>> + > >>>>>>>>>>>> +jiffies = jiffies_64; > >>>>>>>>>>>> + > >>>>>>>>>>>> +SECTIONS > >>>>>>>>>>>> +{ > >>>>>>>>>>>> + /* Beginning of code and text segment */ > >>>>>>>>>>>> + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR); > >>>>>>>>>>>> + _xiprom = .; > >>>>>>>>>>>> + _start = .; > >>>>>>>>>>>> + HEAD_TEXT_SECTION > >>>>>>>>>>>> + INIT_TEXT_SECTION(PAGE_SIZE) > >>>>>>>>>>>> + /* we have to discard exit text and such at runtime, not > >>>>>>>>>>>> link time */ > >>>>>>>>>>>> + .exit.text : > >>>>>>>>>>>> + { > >>>>>>>>>>>> + EXIT_TEXT > >>>>>>>>>>>> + } > >>>>>>>>>>>> + > >>>>>>>>>>>> + .text : { > >>>>>>>>>>>> + _text = .; > >>>>>>>>>>>> + _stext = .; > >>>>>>>>>>>> + TEXT_TEXT > >>>>>>>>>>>> + SCHED_TEXT > >>>>>>>>>>>> + CPUIDLE_TEXT > >>>>>>>>>>>> + LOCK_TEXT > >>>>>>>>>>>> + KPROBES_TEXT > >>>>>>>>>>>> + ENTRY_TEXT > >>>>>>>>>>>> + IRQENTRY_TEXT > >>>>>>>>>>>> + SOFTIRQENTRY_TEXT > >>>>>>>>>>>> + *(.fixup) > >>>>>>>>>>>> + _etext = .; > >>>>>>>>>>>> + } > >>>>>>>>>>>> + RO_DATA(L1_CACHE_BYTES) > >>>>>>>>>>>> + .srodata : { > >>>>>>>>>>>> + *(.srodata*) > >>>>>>>>>>>> + } > >>>>>>>>>>>> + .init.rodata : { > >>>>>>>>>>>> + INIT_SETUP(16) > >>>>>>>>>>>> + INIT_CALLS > >>>>>>>>>>>> + CON_INITCALL > >>>>>>>>>>>> + INIT_RAM_FS > >>>>>>>>>>>> + } > >>>>>>>>>>>> + _exiprom = .; /* End of XIP ROM area */ > >>>>>>>>>>>> + > >>>>>>>>>>>> + > >>>>>>>>>>>> +/* > >>>>>>>>>>>> + * From this point, stuff is considered writable and will be > >>>>>>>>>>>> copied to RAM > >>>>>>>>>>>> + */ > >>>>>>>>>>>> + __data_loc = ALIGN(16); /* location in file */ > >>>>>>>>>>>> + . = PAGE_OFFSET; /* location in memory */ > >>>>>>>>>>>> + > >>>>>>>>>>>> + _sdata = .; /* Start of data section */ > >>>>>>>>>>>> + _data = .; > >>>>>>>>>>>> + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) > >>>>>>>>>>>> + _edata = .; > >>>>>>>>>>>> + __start_ro_after_init = .; > >>>>>>>>>>>> + .data.ro_after_init : AT(ADDR(.data.ro_after_init) - > >>>>>>>>>>>> LOAD_OFFSET) { > >>>>>>>>>>>> + *(.data..ro_after_init) > >>>>>>>>>>>> + } > >>>>>>>>>>>> + __end_ro_after_init = .; > >>>>>>>>>>>> + > >>>>>>>>>>>> + . = ALIGN(PAGE_SIZE); > >>>>>>>>>>>> + __init_begin = .; > >>>>>>>>>>>> + .init.data : { > >>>>>>>>>>>> + INIT_DATA > >>>>>>>>>>>> + } > >>>>>>>>>>>> + .exit.data : { > >>>>>>>>>>>> + EXIT_DATA > >>>>>>>>>>>> + } > >>>>>>>>>>>> + . = ALIGN(8); > >>>>>>>>>>>> + __soc_early_init_table : { > >>>>>>>>>>>> + __soc_early_init_table_start = .; > >>>>>>>>>>>> + KEEP(*(__soc_early_init_table)) > >>>>>>>>>>>> + __soc_early_init_table_end = .; > >>>>>>>>>>>> + } > >>>>>>>>>>>> + __soc_builtin_dtb_table : { > >>>>>>>>>>>> + __soc_builtin_dtb_table_start = .; > >>>>>>>>>>>> + KEEP(*(__soc_builtin_dtb_table)) > >>>>>>>>>>>> + __soc_builtin_dtb_table_end = .; > >>>>>>>>>>>> + } > >>>>>>>>>>>> + PERCPU_SECTION(L1_CACHE_BYTES) > >>>>>>>>>>>> + > >>>>>>>>>>>> + . = ALIGN(PAGE_SIZE); > >>>>>>>>>>>> + __init_end = .; > >>>>>>>>>>>> + > >>>>>>>>>>>> + .sdata : { > >>>>>>>>>>>> + __global_pointer$ = . + 0x800; > >>>>>>>>>>>> + *(.sdata*) > >>>>>>>>>>>> + *(.sbss*) > >>>>>>>>>>>> + } > >>>>>>>>>>>> + > >>>>>>>>>>>> + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0) > >>>>>>>>>>>> + EXCEPTION_TABLE(0x10) > >>>>>>>>>>>> + > >>>>>>>>>>>> + .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) { > >>>>>>>>>>>> + *(.rel.dyn*) > >>>>>>>>>>>> + } > >>>>>>>>>>>> + > >>>>>>>>>>>> + /* > >>>>>>>>>>>> + * End of copied data. We need a dummy section to get its > >>>>>>>>>>>> LMA. > >>>>>>>>>>>> + * Also located before final ALIGN() as trailing padding is > >>>>>>>>>>>> not stored > >>>>>>>>>>>> + * in the resulting binary file and useless to copy. > >>>>>>>>>>>> + */ > >>>>>>>>>>>> + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { } > >>>>>>>>>>>> + _edata_loc = LOADADDR(.data.endmark); > >>>>>>>>>>>> + > >>>>>>>>>>>> + . = ALIGN(PAGE_SIZE); > >>>>>>>>>>>> + _end = .; > >>>>>>>>>>>> + > >>>>>>>>>>>> + STABS_DEBUG > >>>>>>>>>>>> + DWARF_DEBUG > >>>>>>>>>>>> + > >>>>>>>>>>>> + DISCARDS > >>>>>>>>>>>> +} > >>>>>>>>>>>> diff --git a/arch/riscv/kernel/vmlinux.lds.S > >>>>>>>>>>>> b/arch/riscv/kernel/vmlinux.lds.S > >>>>>>>>>>>> index de03cb22d0e9..6745ec325930 100644 > >>>>>>>>>>>> --- a/arch/riscv/kernel/vmlinux.lds.S > >>>>>>>>>>>> +++ b/arch/riscv/kernel/vmlinux.lds.S > >>>>>>>>>>>> @@ -4,7 +4,12 @@ > >>>>>>>>>>>> * Copyright (C) 2017 SiFive > >>>>>>>>>>>> */ > >>>>>>>>>>>> > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> +#include "vmlinux-xip.lds.S" > >>>>>>>>>>>> +#else > >>>>>>>>>>>> + > >>>>>>>>>>>> #define LOAD_OFFSET PAGE_OFFSET > >>>>>>>>>>>> + > >>>>>>>>>>>> #include <asm/vmlinux.lds.h> > >>>>>>>>>>>> #include <asm/page.h> > >>>>>>>>>>>> #include <asm/cache.h> > >>>>>>>>>>>> @@ -132,3 +137,4 @@ SECTIONS > >>>>>>>>>>>> > >>>>>>>>>>>> DISCARDS > >>>>>>>>>>>> } > >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */ > >>>>>>>>>>>> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c > >>>>>>>>>>>> index 7f5036fbee8c..efe649d41f95 100644 > >>>>>>>>>>>> --- a/arch/riscv/mm/init.c > >>>>>>>>>>>> +++ b/arch/riscv/mm/init.c > >>>>>>>>>>>> @@ -31,8 +31,8 @@ EXPORT_SYMBOL(empty_zero_page); > >>>>>>>>>>>> > >>>>>>>>>>>> extern char _start[]; > >>>>>>>>>>>> #define DTB_EARLY_BASE_VA PGDIR_SIZE > >>>>>>>>>>>> -void *dtb_early_va __initdata; > >>>>>>>>>>>> -uintptr_t dtb_early_pa __initdata; > >>>>>>>>>>>> +void *_dtb_early_va __initdata; > >>>>>>>>>>>> +uintptr_t _dtb_early_pa __initdata; > >>>>>>>>>>>> > >>>>>>>>>>>> struct pt_alloc_ops { > >>>>>>>>>>>> pte_t *(*get_pte_virt)(phys_addr_t pa); > >>>>>>>>>>>> @@ -88,6 +88,10 @@ static void print_vm_layout(void) > >>>>>>>>>>>> (unsigned long)VMALLOC_END); > >>>>>>>>>>>> print_mlm("lowmem", (unsigned long)PAGE_OFFSET, > >>>>>>>>>>>> (unsigned long)high_memory); > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> + print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START, > >>>>>>>>>>>> + (unsigned long)XIP_VIRT_ADDR_START + SZ_16M); > >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */ > >>>>>>>>>>>> } > >>>>>>>>>>>> #else > >>>>>>>>>>>> static void print_vm_layout(void) { } > >>>>>>>>>>>> @@ -113,6 +117,10 @@ void __init setup_bootmem(void) > >>>>>>>>>>>> phys_addr_t dram_end = memblock_end_of_DRAM(); > >>>>>>>>>>>> phys_addr_t max_mapped_addr = __pa(~(ulong)0); > >>>>>>>>>>>> > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> + vmlinux_start = __pa_symbol(&_sdata); > >>>>>>>>>>>> +#endif > >>>>>>>>>>>> + > >>>>>>>>>>>> /* The maximal physical memory size is -PAGE_OFFSET. */ > >>>>>>>>>>>> memblock_enforce_memory_limit(-PAGE_OFFSET); > >>>>>>>>>>>> > >>>>>>>>>>>> @@ -149,11 +157,27 @@ void __init setup_bootmem(void) > >>>>>>>>>>>> memblock_allow_resize(); > >>>>>>>>>>>> } > >>>>>>>>>>>> > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> + > >>>>>>>>>>>> +extern char _xiprom[], _exiprom[]; > >>>>>>>>>>>> +extern char _sdata[], _edata[]; > >>>>>>>>>>>> + > >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */ > >>>>>>>>>>>> + > >>>>>>>>>>>> #ifdef CONFIG_MMU > >>>>>>>>>>>> -static struct pt_alloc_ops pt_ops; > >>>>>>>>>>>> +static struct pt_alloc_ops _pt_ops; > >>>>>>>>>>>> + > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> +#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&_pt_ops)) > >>>>>>>>>>>> +#else > >>>>>>>>>>>> +#define pt_ops _pt_ops > >>>>>>>>>>>> +#endif > >>>>>>>>>>>> > >>>>>>>>>>>> unsigned long va_pa_offset; > >>>>>>>>>>>> EXPORT_SYMBOL(va_pa_offset); > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> +#define va_pa_offset (*((unsigned long > >>>>>>>>>>>> *)XIP_FIXUP(&va_pa_offset))) > >>>>>>>>>>>> +#endif > >>>>>>>>>>>> unsigned long pfn_base; > >>>>>>>>>>>> EXPORT_SYMBOL(pfn_base); > >>>>>>>>>>>> > >>>>>>>>>>>> @@ -163,6 +187,12 @@ pte_t fixmap_pte[PTRS_PER_PTE] > >>>>>>>>>>>> __page_aligned_bss; > >>>>>>>>>>>> > >>>>>>>>>>>> pgd_t early_pg_dir[PTRS_PER_PGD] __initdata > >>>>>>>>>>>> __aligned(PAGE_SIZE); > >>>>>>>>>>>> > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> +#define trampoline_pg_dir ((pgd_t > >>>>>>>>>>>> *)XIP_FIXUP(trampoline_pg_dir)) > >>>>>>>>>>>> +#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte)) > >>>>>>>>>>>> +#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir)) > >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */ > >>>>>>>>>>>> + > >>>>>>>>>>>> void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, > >>>>>>>>>>>> pgprot_t prot) > >>>>>>>>>>>> { > >>>>>>>>>>>> unsigned long addr = __fix_to_virt(idx); > >>>>>>>>>>>> @@ -238,6 +268,15 @@ pmd_t fixmap_pmd[PTRS_PER_PMD] > >>>>>>>>>>>> __page_aligned_bss; > >>>>>>>>>>>> pmd_t early_pmd[PTRS_PER_PMD] __initdata > >>>>>>>>>>>> __aligned(PAGE_SIZE); > >>>>>>>>>>>> pmd_t early_dtb_pmd[PTRS_PER_PMD] __initdata > >>>>>>>>>>>> __aligned(PAGE_SIZE); > >>>>>>>>>>>> > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> +pmd_t xip_pmd[PTRS_PER_PMD] __page_aligned_bss; > >>>>>>>>>>>> + > >>>>>>>>>>>> +#define trampoline_pmd ((pmd_t > >>>>>>>>>>>> *)XIP_FIXUP(trampoline_pmd)) > >>>>>>>>>>>> +#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd)) > >>>>>>>>>>>> +#define xip_pmd ((pmd_t *)XIP_FIXUP(xip_pmd)) > >>>>>>>>>>>> +#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd)) > >>>>>>>>>>>> +#endif /* CONFIG_XIP_KERNEL */ > >>>>>>>>>>>> + > >>>>>>>>>>>> static pmd_t *__init get_pmd_virt_early(phys_addr_t pa) > >>>>>>>>>>>> { > >>>>>>>>>>>> /* Before MMU is enabled */ > >>>>>>>>>>>> @@ -354,6 +393,19 @@ static uintptr_t __init > >>>>>>>>>>>> best_map_size(phys_addr_t base, phys_addr_t size) > >>>>>>>>>>>> return PMD_SIZE; > >>>>>>>>>>>> } > >>>>>>>>>>>> > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> +/* called from head.S with MMU off */ > >>>>>>>>>>>> +asmlinkage void __init __copy_data(void) > >>>>>>>>>>>> +{ > >>>>>>>>>>>> + void *from = (void *)(&_sdata); > >>>>>>>>>>>> + void *end = (void *)(&_end); > >>>>>>>>>>>> + void *to = (void *)CONFIG_PHYS_RAM_BASE; > >>>>>>>>>>>> + size_t sz = (size_t)(end - from); > >>>>>>>>>>>> + > >>>>>>>>>>>> + memcpy(to, from, sz); > >>>>>>>>>>>> +} > >>>>>>>>>>>> +#endif > >>>>>>>>>>>> + > >>>>>>>>>>>> /* > >>>>>>>>>>>> * setup_vm() is called from head.S with MMU-off. > >>>>>>>>>>>> * > >>>>>>>>>>>> @@ -374,7 +426,8 @@ static uintptr_t __init > >>>>>>>>>>>> best_map_size(phys_addr_t base, phys_addr_t size) > >>>>>>>>>>>> > >>>>>>>>>>>> asmlinkage void __init setup_vm(uintptr_t dtb_pa) > >>>>>>>>>>>> { > >>>>>>>>>>>> - uintptr_t va, pa, end_va; > >>>>>>>>>>>> + uintptr_t va, end_va; > >>>>>>>>>>>> + uintptr_t __maybe_unused pa; > >>>>>>>>>>>> uintptr_t load_pa = (uintptr_t)(&_start); > >>>>>>>>>>>> uintptr_t load_sz = (uintptr_t)(&_end) - load_pa; > >>>>>>>>>>>> uintptr_t map_size; > >>>>>>>>>>>> @@ -382,6 +435,13 @@ asmlinkage void __init setup_vm(uintptr_t > >>>>>>>>>>>> dtb_pa) > >>>>>>>>>>>> pmd_t fix_bmap_spmd, fix_bmap_epmd; > >>>>>>>>>>>> #endif > >>>>>>>>>>>> > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> + uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR; > >>>>>>>>>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - > >>>>>>>>>>>> (uintptr_t)(&_xiprom); > >>>>>>>>>>>> + > >>>>>>>>>>>> + load_pa = (uintptr_t)CONFIG_PHYS_RAM_BASE; > >>>>>>>>>>>> + load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata); > >>>>>>>>>>>> +#endif > >>>>>>>>>>>> va_pa_offset = PAGE_OFFSET - load_pa; > >>>>>>>>> > >>>>>>>>> I should have seen this before, I was too focused on having a XIP > >>>>>>>>> kernel > >>>>>>>>> boot. I already moved the kernel mapping in the vmalloc zone: the > >>>>>>>>> virtual to physical translations need to be handled differently > >>>>>>>>> now that > >>>>>>>>> the kernel mapping does not lie into linear mapping anymore, we > >>>>>>>>> can't > >>>>>>>>> use va_pa_offset defined above for both mappings. > >>>>>>>>> > >>>>>>>>> I was rebasing my patchset on the XIP patch but I believe that > >>>>>>>>> doing the > >>>>>>>>> other way around would greatly simplify the XIP patch as the kernel > >>>>>>>>> mapping would already be moved outside the linear mapping, there > >>>>>>>>> would > >>>>>>>>> be no need to reserve a zone in vmalloc anymore (that simplifies > >>>>>>>>> pgtable.h quite a lot). And the XIP kernel mapping could be > >>>>>>>>> implemented > >>>>>>>>> in a new create_kernel_page_table (that would also simplify > >>>>>>>>> mm/init.c). > >>>>>>>>> > >>>>>>>>> I can help to do that but I don't think we should merge this patch > >>>>>>>>> as is > >>>>>>>>> now. > >>>>>>>> > >>>>>>>> I think that's the right way to go for now: it's a lot harder to test > >>>>>>>> the XIP stuff, as it requires a bunch of harness changes. So let's > >>>>>>>> take the page table refactoring in now and rebase this stuff on top > >>>>>>>> of > >>>>>>>> it. There's really no way to do both without making more work for > >>>>>>>> someone, it's just a headache on timing. > >>>>>>>> > >>>>>>>> Alex: if you want to sign up to spend some time there that'd be > >>>>>>>> great, > >>>>>>>> otherwise I will. > >>>>>>> > >>>>>>> I can take care of that, no problem. > >>>>>> > >>>>>> Vitaly, can you try the branch int/alex/riscv_xip_kernel_rebase_v1 at > >>>>>> https://github.com/AlexGhiti/riscv-linux ? This boots fine using my > >>>>>> setup. > >>>>>> > >>>>>> I removed most of the pgtable.h stuff, the XIP kernel is now mapped > >>>>>> like > >>>>>> any other kernel at the end of the address space, not in the vmalloc > >>>>>> zone as you proposed. And I fixed a few thigns along the way (pfn_base, > >>>>>> pfn_valid, copy_data and other stuff). > >>>>>> > >>>>>> Any comment is welcome ! > >>>>> > >>>>> thanks for your efforts! > >>>>> > >>>>> I've just built your version. The build went well, but the image > >>>>> doesn't seem to boot for me. > >>>> > >>>> Too bad. Can you give me your config please ? > >>>> > >>> > >>> Apparently, as you can see below, your config works for me, at least it > >>> reaches userspace. Do you have traces or more info about what is wrong ? > >> > >> Console output is just the same but it stops after the following line: > >> [ 0.003208] Console: colour dummy device 80x25 > >> > >> I did some very simplistic debugging bisecting start_kernel() > >> execution and I could see that setup_per_cpu_pageset() was reached > >> while calibrate_delay() was not. > >> > >> How (and whether) this might be related to XIP I don't know :) > > > > A short update: the system would hang in sched_clock_init() if run > > with 'go 21000000' command. > > The output I pasted came from a boot using 'go', I can't make 'booti' > work in my setup. > > And you don't have this issue with your patch right ?
I don't have it with yours as well. :) However, there's a small change in u-boot's arch/riscv/lib/image.c that I forgot about (but sent it today, and you're on CC). Basically u-boot needs to honor force_reloc flag and not *force* the relocation when this flag is not set. > Can you give me any config that could allow me to reproduce this > (uboot/buildroot) ? And your qemu version ? Other than the small change mentioned above, u-boot and qemu are basically the latest git. All in all, I am quite sure now that your take on XIP is working fine. The issue with single-core boot under QEmu seems to be less reproducible on slower machines running QEmu and more reproducible on higher performance ones. It's not clear to me if that is a QEmu problem or an in-kernel race, but it's hardly a XIP problem: I was able to reproduce it once on a non-XIP kernel too, by copying it to RAM in u-boot and giving it a 'go'. > Thanks, > > > If I use 'booti' command it passes and goes further all the way to > > mounting the userspace > > > > So the problem is rather SMP related than XIP related. > > > > > > > Best regards, > > Vitaly > > > >>> Thanks! > >>> > >>> [ 0.000000] Linux version 5.12.0-rc2 (alex@debian) > >>> (riscv64-buildroot-linux-gnu-gcc.br_real (Buildroot 2020.11.2) 9.3.0, > >>> GNU ld (GNU Binutils) 2.34) #322 SMP Sat Apr 3 05:50:18 EDT 2021 > >>> [ 0.000000] Machine model: Microchip PolarFire-SoC Icicle Kit > >>> [ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '') > >>> [ 0.000000] printk: bootconsole [sbi0] enabled > >>> [ 0.000000] Zone ranges: > >>> [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000bfffffff] > >>> [ 0.000000] Normal empty > >>> [ 0.000000] Movable zone start for each node > >>> [ 0.000000] Early memory node ranges > >>> [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000bfffffff] > >>> [ 0.000000] Initmem setup node 0 [mem > >>> 0x0000000080000000-0x00000000bfffffff] > >>> [ 0.000000] On node 0 totalpages: 262144 > >>> [ 0.000000] DMA32 zone: 3584 pages used for memmap > >>> [ 0.000000] DMA32 zone: 0 pages reserved > >>> [ 0.000000] DMA32 zone: 262144 pages, LIFO batch:63 > >>> [ 0.000000] SBI specification v0.2 detected > >>> [ 0.000000] SBI implementation ID=0x1 Version=0x6 > >>> [ 0.000000] SBI v0.2 TIME extension detected > >>> [ 0.000000] SBI v0.2 IPI extension detected > >>> [ 0.000000] SBI v0.2 RFENCE extension detected > >>> [ 0.000000] software IO TLB: mapped [mem > >>> 0x00000000b9e00000-0x00000000bde00000] (64MB) > >>> [ 0.000000] CPU with hartid=0 is not available > >>> [ 0.000000] CPU with hartid=0 is not available > >>> [ 0.000000] riscv: ISA extensions acdfim > >>> [ 0.000000] riscv: ELF capabilities acdfim > >>> [ 0.000000] percpu: Embedded 17 pages/cpu s29856 r8192 d31584 u69632 > >>> [ 0.000000] pcpu-alloc: s29856 r8192 d31584 u69632 alloc=17*4096 > >>> [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 > >>> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: > >>> 258560 > >>> [ 0.000000] Kernel command line: earlyprintk debug earlycon=sbi > >>> console=ttyS0,115200n8 root=/dev/ram0 init=/sbin/init > >>> [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, > >>> 1048576 bytes, linear) > >>> [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 > >>> bytes, linear) > >>> [ 0.000000] Sorting __ex_table... > >>> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off > >>> [ 0.000000] Memory: 947732K/1048576K available (2999K kernel code, > >>> 692K rwdata, 953K rodata, 205K init, 247K bss, 100844K reserved, 0K > >>> cma-reserved) > >>> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 > >>> [ 0.000000] rcu: Hierarchical RCU implementation. > >>> [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to > >>> nr_cpu_ids=4. > >>> [ 0.000000] rcu: RCU debug extended QS entry/exit. > >>> [ 0.000000] Tracing variant of Tasks RCU enabled. > >>> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay > >>> is 25 jiffies. > >>> [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, > >>> nr_cpu_ids=4 > >>> [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 > >>> [ 0.000000] CPU with hartid=0 is not available > >>> [ 0.000000] riscv-intc: unable to find hart id for > >>> /cpus/cpu@0/interrupt-controller > >>> [ 0.000000] riscv-intc: 64 local interrupts mapped > >>> [ 0.000000] plic: interrupt-controller@c000000: mapped 186 interrupts > >>> with 4 handlers for 9 contexts. > >>> [ 0.000000] random: get_random_bytes called from > >>> start_kernel+0x2fe/0x49c with crng_init=0 > >>> [ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] > >>> hartid [1] > >>> [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff > >>> max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns > >>> [ 0.000146] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps > >>> every 2199023255500ns > >>> [ 0.006056] Console: colour dummy device 80x25 > >>> [ 0.015242] Calibrating delay loop (skipped), value calculated using > >>> timer frequency.. 2.00 BogoMIPS (lpj=4000) > >>> [ 0.017130] pid_max: default: 32768 minimum: 301 > >>> [ 0.020115] Mount-cache hash table entries: 2048 (order: 2, 16384 > >>> bytes, linear) > >>> [ 0.021097] Mountpoint-cache hash table entries: 2048 (order: 2, > >>> 16384 bytes, linear) > >>> [ 0.078755] ASID allocator using 16 bits (65536 entries) > >>> [ 0.083669] rcu: Hierarchical SRCU implementation. > >>> [ 0.093304] smp: Bringing up secondary CPUs ... > >>> [ 1.149900] CPU1: failed to come online > >>> [ 2.204183] CPU2: failed to come online > >>> [ 3.256211] CPU3: failed to come online > >>> [ 3.257043] smp: Brought up 1 node, 1 CPU > >>> [ 3.269554] devtmpfs: initialized > >>> [ 3.282015] clocksource: jiffies: mask: 0xffffffff max_cycles: > >>> 0xffffffff, max_idle_ns: 7645041785100000 ns > >>> [ 3.283484] futex hash table entries: 1024 (order: 4, 65536 bytes, > >>> linear) > >>> [ 3.381718] SCSI subsystem initialized > >>> [ 3.385115] clocksource: Switched to clocksource riscv_clocksource > >>> [ 3.602198] workingset: timestamp_bits=62 max_order=18 bucket_order=0 > >>> [ 3.624182] Block layer SCSI generic (bsg) driver version 0.4 loaded > >>> (major 253) > >>> [ 3.625988] io scheduler mq-deadline registered > >>> [ 3.626725] io scheduler kyber registered > >>> [ 3.629047] start plist test > >>> [ 3.641420] end plist test > >>> [ 3.717639] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > >>> [ 3.752315] brd: module loaded > >>> [ 3.790207] loop: module loaded > >>> [ 3.793943] mousedev: PS/2 mouse device common for all mice > >>> [ 3.810511] Warning: unable to open an initial console. > >>> [ 3.811923] Freeing unused kernel memory: 88K > >>> [ 3.812558] This architecture does not have kernel memory protection. > >>> [ 3.814280] Run /init as init process > >>> [ 3.814808] with arguments: > >>> [ 3.815227] /init > >>> [ 3.815539] with environment: > >>> [ 3.815924] HOME=/ > >>> [ 3.816250] TERM=linux > >>> [ 4.398678] random: dd: uninitialized urandom read (512 bytes read) > >>> > >>> > >>>> Thanks, > >>>> > >>>> Alex > >>>> > >>>>> I'll take a look at the code later today. > >>>>> > >>>>> Best regards, > >>>>> Vitaly > >>>>> > >>>>>> Thanks, > >>>>>> > >>>>>> Alex > >>>>>> > >>>>>>> > >>>>>>>> Either way, can you point me (either just indicate the old version is > >>>>>>>> OK or send a new one) to what you want me to look at WRT the page > >>>>>>>> table code? IIRC it looked pretty much fine, but I'll take another > >>>>>>>> look ASAP so we can avoid serializing everything. > >>>>>>> > >>>>>>> The v3 is fine for me: > >>>>>>> https://patchwork.kernel.org/project/linux-riscv/list/?series=447699 > >>>>>>> > >>>>>>>> > >>>>>>>>> > >>>>>>>>> Alex > >>>>>>>>> > >>>>>>>>>>>> pfn_base = PFN_DOWN(load_pa); > >>>>>>>>>>>> > >>>>>>>>>>>> @@ -420,6 +480,21 @@ asmlinkage void __init setup_vm(uintptr_t > >>>>>>>>>>>> dtb_pa) > >>>>>>>>>>>> load_pa, PGDIR_SIZE, > >>>>>>>>>>>> PAGE_KERNEL_EXEC); > >>>>>>>>>>>> #endif > >>>>>>>>>>>> > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> + create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START, > >>>>>>>>>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE, > >>>>>>>>>>>> PAGE_TABLE); > >>>>>>>>>>>> + for (va = XIP_VIRT_ADDR_START; > >>>>>>>>>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz; > >>>>>>>>>>>> + va += PMD_SIZE) { > >>>>>>>>>>>> + create_pmd_mapping(xip_pmd, va, > >>>>>>>>>>>> + xiprom + (va - > >>>>>>>>>>>> XIP_VIRT_ADDR_START), > >>>>>>>>>>>> + PMD_SIZE, PAGE_KERNEL_EXEC); > >>>>>>>>>>>> + } > >>>>>>>>>>>> + > >>>>>>>>>>>> + create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START, > >>>>>>>>>>>> + (uintptr_t)xip_pmd, PGDIR_SIZE, > >>>>>>>>>>>> PAGE_TABLE); > >>>>>>>>>>>> +#endif > >>>>>>>>>>>> + > >>>>>>>>>>>> /* > >>>>>>>>>>>> * Setup early PGD covering entire kernel which will > >>>>>>>>>>>> allows > >>>>>>>>>>>> * us to reach paging_init(). We map all memory banks > >>>>>>>>>>>> later > >>>>>>>>>>>> @@ -444,7 +519,7 @@ asmlinkage void __init setup_vm(uintptr_t > >>>>>>>>>>>> dtb_pa) > >>>>>>>>>>>> pa + PMD_SIZE, PMD_SIZE, > >>>>>>>>>>>> PAGE_KERNEL); > >>>>>>>>>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & > >>>>>>>>>>>> (PMD_SIZE - 1)); > >>>>>>>>>>>> #else /* CONFIG_BUILTIN_DTB */ > >>>>>>>>>>>> - dtb_early_va = __va(dtb_pa); > >>>>>>>>>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa)); > >>>>>>>>>>>> #endif /* CONFIG_BUILTIN_DTB */ > >>>>>>>>>>>> #else > >>>>>>>>>>>> #ifndef CONFIG_BUILTIN_DTB > >>>>>>>>>>>> @@ -456,7 +531,7 @@ asmlinkage void __init setup_vm(uintptr_t > >>>>>>>>>>>> dtb_pa) > >>>>>>>>>>>> pa + PGDIR_SIZE, PGDIR_SIZE, > >>>>>>>>>>>> PAGE_KERNEL); > >>>>>>>>>>>> dtb_early_va = (void *)DTB_EARLY_BASE_VA + (dtb_pa & > >>>>>>>>>>>> (PGDIR_SIZE - 1)); > >>>>>>>>>>>> #else /* CONFIG_BUILTIN_DTB */ > >>>>>>>>>>>> - dtb_early_va = __va(dtb_pa); > >>>>>>>>>>>> + dtb_early_va = __va(XIP_FIXUP(dtb_pa)); > >>>>>>>>>>>> #endif /* CONFIG_BUILTIN_DTB */ > >>>>>>>>>>>> #endif > >>>>>>>>>>>> dtb_early_pa = dtb_pa; > >>>>>>>>>>>> @@ -497,6 +572,9 @@ static void __init setup_vm_final(void) > >>>>>>>>>>>> uintptr_t va, map_size; > >>>>>>>>>>>> phys_addr_t pa, start, end; > >>>>>>>>>>>> u64 i; > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - > >>>>>>>>>>>> (uintptr_t)(&_xiprom); > >>>>>>>>>>>> +#endif > >>>>>>>>>>>> > >>>>>>>>>>>> /** > >>>>>>>>>>>> * MMU is enabled at this point. But page table setup is > >>>>>>>>>>>> not complete yet. > >>>>>>>>>>>> @@ -528,6 +606,16 @@ static void __init setup_vm_final(void) > >>>>>>>>>>>> map_size, > >>>>>>>>>>>> PAGE_KERNEL_EXEC); > >>>>>>>>>>>> } > >>>>>>>>>>>> } > >>>>>>>>>>>> +#ifdef CONFIG_XIP_KERNEL > >>>>>>>>>>>> + map_size = best_map_size(CONFIG_XIP_PHYS_ADDR, xiprom_sz); > >>>>>>>>>>>> + for (va = XIP_VIRT_ADDR_START; > >>>>>>>>>>>> + va < XIP_VIRT_ADDR_START + xiprom_sz; > >>>>>>>>>>>> + va += map_size) > >>>>>>>>>>>> + create_pgd_mapping(swapper_pg_dir, va, > >>>>>>>>>>>> + CONFIG_XIP_PHYS_ADDR + (va - > >>>>>>>>>>>> XIP_VIRT_ADDR_START), > >>>>>>>>>>>> + map_size, PAGE_KERNEL_EXEC); > >>>>>>>>>>>> + > >>>>>>>>>>>> +#endif > >>>>>>>>>>>> > >>>>>>>>>>>> /* Clear fixmap PTE and PMD mappings */ > >>>>>>>>>>>> clear_fixmap(FIX_PTE); > >>>>>>>>>> > >>>>>>>>>> _______________________________________________ > >>>>>>>>>> linux-riscv mailing list > >>>>>>>>>> linux-ri...@lists.infradead.org > >>>>>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv > >>>>>>>>>> > >>>>>>>> > >>>>>>>> _______________________________________________ > >>>>>>>> linux-riscv mailing list > >>>>>>>> linux-ri...@lists.infradead.org > >>>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv > >>>>>>> > >>>>>>> _______________________________________________ > >>>>>>> linux-riscv mailing list > >>>>>>> linux-ri...@lists.infradead.org > >>>>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv > >>>>> > >>>>> _______________________________________________ > >>>>> linux-riscv mailing list > >>>>> linux-ri...@lists.infradead.org > >>>>> http://lists.infradead.org/mailman/listinfo/linux-riscv > >>>>> > > > > _______________________________________________ > > linux-riscv mailing list > > linux-ri...@lists.infradead.org > > http://lists.infradead.org/mailman/listinfo/linux-riscv > >