From: Mauro Carvalho Chehab <mchehab+hua...@kernel.org> Now that the xr_serial got support for other models, add their USB IDs as well.
The Maxlinear/Exar USB UARTs can be used in either ACM mode using the cdc-acm driver or in "custom driver" mode in which further features such as hardware and software flow control, GPIO control and in-band line-status reporting are available. In ACM mode the device always enables RTS/CTS flow control, something which could prevent transmission in case the CTS input isn't wired up correctly. Ensure that cdc_acm will not bind to these devices if the custom USB-serial driver is enabled. Signed-off-by: Mauro Carvalho Chehab <mchehab+hua...@kernel.org> Link: https://lore.kernel.org/r/5155887a764cbc11f8da0217fe08a24a77d120b4.1616571453.git.mchehab+hua...@kernel.org [ johan: rewrite commit message, clean up entries ] Cc: Oliver Neukum <oneu...@suse.com> Signed-off-by: Johan Hovold <jo...@kernel.org> --- drivers/usb/class/cdc-acm.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 337ffced9c40..434539b13a70 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1903,9 +1903,17 @@ static const struct usb_device_id acm_ids[] = { #endif #if IS_ENABLED(CONFIG_USB_SERIAL_XR) - { USB_DEVICE(0x04e2, 0x1410), /* Ignore XR21V141X USB to Serial converter */ - .driver_info = IGNORE_DEVICE, - }, + { USB_DEVICE(0x04e2, 0x1400), .driver_info = IGNORE_DEVICE }, + { USB_DEVICE(0x04e2, 0x1401), .driver_info = IGNORE_DEVICE }, + { USB_DEVICE(0x04e2, 0x1402), .driver_info = IGNORE_DEVICE }, + { USB_DEVICE(0x04e2, 0x1403), .driver_info = IGNORE_DEVICE }, + { USB_DEVICE(0x04e2, 0x1410), .driver_info = IGNORE_DEVICE }, + { USB_DEVICE(0x04e2, 0x1411), .driver_info = IGNORE_DEVICE }, + { USB_DEVICE(0x04e2, 0x1412), .driver_info = IGNORE_DEVICE }, + { USB_DEVICE(0x04e2, 0x1414), .driver_info = IGNORE_DEVICE }, + { USB_DEVICE(0x04e2, 0x1420), .driver_info = IGNORE_DEVICE }, + { USB_DEVICE(0x04e2, 0x1422), .driver_info = IGNORE_DEVICE }, + { USB_DEVICE(0x04e2, 0x1424), .driver_info = IGNORE_DEVICE }, #endif /*Samsung phone in firmware update mode */ -- 2.26.3
