Hi Jacopo and Kieran,

Thank you for the patch.

On Wed, Apr 14, 2021 at 03:51:27PM +0200, Jacopo Mondi wrote:
> From: Kieran Bingham <kieran.bing...@ideasonboard.com>
> 
> Describe the FAKRA connector available on Eagle board that allows
> connecting GMSL camera modules such as IMI RDACM20 and RDACM21.
> 
> Signed-off-by: Kieran Bingham <kieran.bing...@ideasonboard.com>
> Signed-off-by: Jacopo Mondi <jacopo+rene...@jmondi.org>
> ---
>  arch/arm64/boot/dts/renesas/eagle-gmsl.dtsi | 186 ++++++++++++++++++++
>  1 file changed, 186 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/renesas/eagle-gmsl.dtsi
> 
> diff --git a/arch/arm64/boot/dts/renesas/eagle-gmsl.dtsi 
> b/arch/arm64/boot/dts/renesas/eagle-gmsl.dtsi
> new file mode 100644
> index 000000000000..1836bca1e8b2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/eagle-gmsl.dtsi
> @@ -0,0 +1,186 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Device Tree Source (overlay) for the Eagle V3M GMSL connectors
> + *
> + * Copyright (C) 2017 Ideas on Board <kieran.bing...@ideasonboard.com>
> + * Copyright (C) 2021 Jacopo Mondi <jacopo+rene...@jmondi.org>
> + *
> + * This overlay allows you to define GMSL cameras connected to the FAKRA
> + * connectors on the Eagle-V3M (or compatible) board.
> + *
> + * The following cameras are currently supported:
> + *    "imi,rdacm20"
> + *    "imi,rdacm21"
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/*
> + * Select which cameras are in use:
> + * #define EAGLE_CAMERA0_RDACM20
> + * #define EAGLE_CAMERA0_RDACM21
> + *
> + * The two camera modules are configured with different image formats
> + * and cannot be mixed.
> + */
> +#define EAGLE_CAMERA0_RDACM21
> +#define EAGLE_CAMERA1_RDACM21
> +#define EAGLE_CAMERA2_RDACM21
> +#define EAGLE_CAMERA3_RDACM21

To avoid possible errors, I'd use one macro to set the camera model, and
another macro to select the ports. The second could be a bitmask if
desired.

These macros should be defined in the file that includes this file, not
here.

> +
> +/* Set the compatible string based on the camera model. */
> +#if defined(EAGLE_CAMERA0_RDACM21) || defined(EAGLE_CAMERA1_RDACM21) || \
> +    defined(EAGLE_CAMERA2_RDACM21) || defined(EAGLE_CAMERA3_RDACM21)
> +#define EAGLE_CAMERA_MODEL   "imi,rdacm21"
> +#define EAGLE_USE_RDACM21
> +#elif defined(EAGLE_CAMERA0_RDACM20) || defined(EAGLE_CAMERA1_RDACM20) || \
> +      defined(EAGLE_CAMERA2_RDACM20) || defined(EAGLE_CAMERA3_RDACM20)
> +#define EAGLE_CAMERA_MODEL   "imi,rdacm20"
> +#define EAGLE_USE_RDACM20
> +#endif
> +
> +/* Define which cameras are available. */
> +#if defined(EAGLE_CAMERA0_RDACM21) || defined(EAGLE_CAMERA0_RDACM20)
> +#define EAGLE_USE_CAMERA_0
> +#endif
> +
> +#if defined(EAGLE_CAMERA1_RDACM21) || defined(EAGLE_CAMERA1_RDACM20)
> +#define EAGLE_USE_CAMERA_1
> +#endif
> +
> +#if defined(EAGLE_CAMERA2_RDACM21) || defined(EAGLE_CAMERA2_RDACM20)
> +#define EAGLE_USE_CAMERA_2
> +#endif
> +
> +#if defined(EAGLE_CAMERA3_RDACM21) || defined(EAGLE_CAMERA3_RDACM20)
> +#define EAGLE_USE_CAMERA_3
> +#endif
> +
> +/* Define the endpoint links. */
> +#ifdef EAGLE_USE_CAMERA_0
> +&max9286_in0 {
> +     remote-endpoint = <&fakra_con0>;
> +};
> +#endif
> +
> +#ifdef EAGLE_USE_CAMERA_1
> +&max9286_in1 {
> +     remote-endpoint = <&fakra_con1>;
> +};
> +#endif
> +
> +#ifdef EAGLE_USE_CAMERA_2
> +&max9286_in2 {
> +     remote-endpoint = <&fakra_con2>;
> +};
> +#endif
> +
> +#ifdef EAGLE_USE_CAMERA_3
> +&max9286_in3 {
> +     remote-endpoint = <&fakra_con3>;
> +};
> +#endif
> +
> +/* Populate the GMSL i2c-mux bus with camera nodes. */
> +#if defined(EAGLE_USE_RDACM21) || defined(EAGLE_USE_RDACM20)
> +
> +#ifdef EAGLE_USE_CAMERA_0
> +&vin0 {
> +     status = "okay";
> +};
> +#endif
> +
> +#ifdef EAGLE_USE_CAMERA_1
> +&vin1 {
> +     status = "okay";
> +};
> +#endif
> +
> +#ifdef EAGLE_USE_CAMERA_2
> +&vin2 {
> +     status = "okay";
> +};
> +#endif
> +
> +#ifdef EAGLE_USE_CAMERA_3
> +&vin3 {
> +     status = "okay";
> +};
> +#endif
> +
> +&gmsl {
> +
> +     status = "okay";
> +     maxim,reverse-channel-microvolt = <100000>;
> +
> +     i2c-mux {
> +#ifdef EAGLE_USE_CAMERA_0
> +             i2c@0 {
> +                     status = "okay";
> +
> +                     camera@51 {
> +                             compatible = EAGLE_CAMERA_MODEL;
> +                             reg = <0x51>, <0x61>;
> +
> +                             port {
> +                                     fakra_con0: endpoint {
> +                                             remote-endpoint = 
> <&max9286_in0>;
> +                                     };
> +                             };
> +                     };
> +             };
> +#endif
> +
> +#ifdef EAGLE_USE_CAMERA_1
> +             i2c@1 {
> +                     status = "okay";
> +
> +                     camera@52 {
> +                             compatible = EAGLE_CAMERA_MODEL;
> +                             reg = <0x52>, <0x62>;
> +
> +                             port {
> +                                     fakra_con1: endpoint {
> +                                             remote-endpoint = 
> <&max9286_in1>;
> +                                     };
> +                             };
> +                     };
> +             };
> +#endif
> +
> +#ifdef EAGLE_USE_CAMERA_2
> +             i2c@2 {
> +                     status = "okay";
> +
> +                     camera@53 {
> +                             compatible = EAGLE_CAMERA_MODEL;
> +                             reg = <0x53>, <0x63>;
> +
> +                             port {
> +                                     fakra_con2: endpoint {
> +                                             remote-endpoint = 
> <&max9286_in2>;
> +                                     };
> +                             };
> +                     };
> +             };
> +#endif
> +
> +#ifdef EAGLE_USE_CAMERA_3
> +             i2c@3 {
> +                     status = "okay";
> +
> +                     camera@54 {
> +                             compatible = EAGLE_CAMERA_MODEL;
> +                             reg = <0x54>, <0x64>;
> +
> +                             port {
> +                                     fakra_con3: endpoint {
> +                                             remote-endpoint = 
> <&max9286_in3>;
> +                                     };
> +                             };
> +                     };
> +             };
> +#endif
> +     };
> +};
> +#endif

-- 
Regards,

Laurent Pinchart

Reply via email to