This move is done to call enter hibernation handler in "dwc2_port_suspend()" function when core receives port suspend. Otherwise it could be confusing to enter to hibernation in "dwc2_hcd_hub_control()" function but other power saving modes in "dwc2_port_suspend()" function.
Signed-off-by: Artur Petrosyan <[email protected]> --- drivers/usb/dwc2/hcd.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index ff945c40ef8a..43a2298b7d42 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -3321,6 +3321,18 @@ int dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex) "enter partial_power_down failed.\n"); break; case DWC2_POWER_DOWN_PARAM_HIBERNATION: + /* + * Perform spin unlock and lock because in + * "dwc2_host_enter_hibernation()" function there is a spinlock + * logic which prevents servicing of any IRQ during entering + * hibernation. + */ + spin_unlock_irqrestore(&hsotg->lock, flags); + ret = dwc2_enter_hibernation(hsotg, 1); + if (ret) + dev_err(hsotg->dev, "enter hibernation failed.\n"); + spin_lock_irqsave(&hsotg->lock, flags); + break; case DWC2_POWER_DOWN_PARAM_NONE: /* * If not hibernation nor partial power down are supported, @@ -3650,10 +3662,8 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq, "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); if (windex != hsotg->otg_port) goto error; - if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_HIBERNATION) - dwc2_enter_hibernation(hsotg, 1); - else - dwc2_port_suspend(hsotg, windex); + if (!hsotg->bus_suspended) + retval = dwc2_port_suspend(hsotg, windex); break; case USB_PORT_FEAT_POWER: -- 2.25.1
