On 4/15/21 8:08 PM, Joe Perches wrote:
> And while it's a lot more code, I'd prefer a solution that looks more
> like the other commonly used kernel logging extension mechanisms
> where adapter is placed before the format, ... in the argument list.
Hi Joe,
I don't mind making these changes. It is quite a bit of code but
consistency with other kernel code is useful. Would you like to finalize
this patch, or would you prefer that I take this patch as starting point
and finalize it?
Thanks,
Khalid
>
> Today it's:
>
> void blogic_msg(enum, fmt, adapter, ...);
>
> without the __printf marking so there is one format/arg mismatch.
>
> fyi: in the suggested patch below it's
> - blogic_info("BIOS Address: 0x%lX, ", adapter,
> - adapter->bios_addr);
> + blogic_cont(adapter, "BIOS Address: 0x%X, ",
> + adapter->bios_addr);
>
> I'd prefer
> __printf(3, 4)
> void blogic_msg(enum, adapter, fmt, ...)
>
> (or maybe void blogic_msg(adapter, enum, fmt, ...))
>
> And there's a simple addition of a blogic_cont macro and extension
> to blogic_msg to simplify the logic and obviousness of the logging
> extension lines too.
>
> I suggest this done with coccinelle and a little typing:
> ---
> drivers/scsi/BusLogic.c | 496
> +++++++++++++++++++++++++++++++-----------------
> drivers/scsi/BusLogic.h | 32 ++--
> 2 files changed, 341 insertions(+), 187 deletions(-)
>
> diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
> index ccb061ab0a0a..7a52371b5ab6 100644
> --- a/drivers/scsi/BusLogic.c
> +++ b/drivers/scsi/BusLogic.c
> @@ -134,8 +134,10 @@ static char *blogic_cmd_failure_reason;
>
> static void blogic_announce_drvr(struct blogic_adapter *adapter)
> {
> - blogic_announce("***** BusLogic SCSI Driver Version "
> blogic_drvr_version " of " blogic_drvr_date " *****\n", adapter);
> - blogic_announce("Copyright 1995-1998 by Leonard N. Zubkoff
> <l...@dandelion.com>\n", adapter);
> + blogic_announce(adapter,
> + "***** BusLogic SCSI Driver Version "
> blogic_drvr_version " of " blogic_drvr_date " *****\n");
> + blogic_announce(adapter,
> + "Copyright 1995-1998 by Leonard N. Zubkoff
> <l...@dandelion.com>\n");
> }
>
>
> @@ -198,8 +200,7 @@ static bool __init blogic_create_initccbs(struct
> blogic_adapter *adapter)
> blk_pointer = dma_alloc_coherent(&adapter->pci_device->dev,
> blk_size, &blkp, GFP_KERNEL);
> if (blk_pointer == NULL) {
> - blogic_err("UNABLE TO ALLOCATE CCB GROUP - DETACHING\n",
> - adapter);
> + blogic_err(adapter, "UNABLE TO ALLOCATE CCB GROUP -
> DETACHING\n");
> return false;
> }
> blogic_init_ccbs(adapter, blk_pointer, blk_size, blkp);
> @@ -259,10 +260,13 @@ static void blogic_create_addlccbs(struct
> blogic_adapter *adapter,
> }
> if (adapter->alloc_ccbs > prev_alloc) {
> if (print_success)
> - blogic_notice("Allocated %d additional CCBs (total now
> %d)\n", adapter, adapter->alloc_ccbs - prev_alloc, adapter->alloc_ccbs);
> + blogic_notice(adapter,
> + "Allocated %d additional CCBs (total now
> %d)\n",
> + adapter->alloc_ccbs - prev_alloc,
> + adapter->alloc_ccbs);
> return;
> }
> - blogic_notice("Failed to allocate additional CCBs\n", adapter);
> + blogic_notice(adapter, "Failed to allocate additional CCBs\n");
> if (adapter->drvr_qdepth > adapter->alloc_ccbs - adapter->tgt_count) {
> adapter->drvr_qdepth = adapter->alloc_ccbs - adapter->tgt_count;
> adapter->scsi_host->can_queue = adapter->drvr_qdepth;
> @@ -441,7 +445,9 @@ static int blogic_cmd(struct blogic_adapter *adapter,
> enum blogic_opcode opcode,
> goto done;
> }
> if (blogic_global_options.trace_config)
> - blogic_notice("blogic_cmd(%02X) Status = %02X: (Modify
> I/O Address)\n", adapter, opcode, statusreg.all);
> + blogic_notice(adapter,
> + "blogic_cmd(%02X) Status = %02X: (Modify
> I/O Address)\n",
> + opcode, statusreg.all);
> result = 0;
> goto done;
> }
> @@ -499,15 +505,16 @@ static int blogic_cmd(struct blogic_adapter *adapter,
> enum blogic_opcode opcode,
> */
> if (blogic_global_options.trace_config) {
> int i;
> - blogic_notice("blogic_cmd(%02X) Status = %02X: %2d ==> %2d:",
> - adapter, opcode, statusreg.all, replylen,
> + blogic_notice(adapter,
> + "blogic_cmd(%02X) Status = %02X: %2d ==> %2d:",
> + opcode, statusreg.all, replylen,
> reply_b);
> if (replylen > reply_b)
> replylen = reply_b;
> for (i = 0; i < replylen; i++)
> - blogic_notice(" %02X", adapter,
> - ((unsigned char *) reply)[i]);
> - blogic_notice("\n", adapter);
> + blogic_cont(adapter, " %02X",
> + ((unsigned char *)reply)[i]);
> + blogic_cont(adapter, "\n");
> }
> /*
> Process Command Invalid conditions.
> @@ -717,23 +724,37 @@ static int __init blogic_init_mm_probeinfo(struct
> blogic_adapter *adapter)
> pci_addr = base_addr1 = pci_resource_start(pci_device, 1);
>
> if (pci_resource_flags(pci_device, 0) & IORESOURCE_MEM) {
> - blogic_err("BusLogic: Base Address0 0x%lX not I/O for
> MultiMaster Host Adapter\n", NULL, base_addr0);
> - blogic_err("at PCI Bus %d Device %d I/O Address
> 0x%lX\n", NULL, bus, device, io_addr);
> + blogic_err(NULL,
> + "BusLogic: Base Address0 0x%lX not I/O for
> MultiMaster Host Adapter\n",
> + base_addr0);
> + blogic_err(NULL,
> + "at PCI Bus %d Device %d I/O Address
> 0x%lX\n",
> + bus, device, io_addr);
> continue;
> }
> if (pci_resource_flags(pci_device, 1) & IORESOURCE_IO) {
> - blogic_err("BusLogic: Base Address1 0x%lX not Memory
> for MultiMaster Host Adapter\n", NULL, base_addr1);
> - blogic_err("at PCI Bus %d Device %d PCI Address
> 0x%lX\n", NULL, bus, device, pci_addr);
> + blogic_err(NULL,
> + "BusLogic: Base Address1 0x%lX not Memory
> for MultiMaster Host Adapter\n",
> + base_addr1);
> + blogic_err(NULL,
> + "at PCI Bus %d Device %d PCI Address
> 0x%lX\n",
> + bus, device, pci_addr);
> continue;
> }
> if (irq_ch == 0) {
> - blogic_err("BusLogic: IRQ Channel %d invalid for
> MultiMaster Host Adapter\n", NULL, irq_ch);
> - blogic_err("at PCI Bus %d Device %d I/O Address
> 0x%lX\n", NULL, bus, device, io_addr);
> + blogic_err(NULL,
> + "BusLogic: IRQ Channel %d invalid for
> MultiMaster Host Adapter\n",
> + irq_ch);
> + blogic_err(NULL,
> + "at PCI Bus %d Device %d I/O Address
> 0x%lX\n",
> + bus, device, io_addr);
> continue;
> }
> if (blogic_global_options.trace_probe) {
> - blogic_notice("BusLogic: PCI MultiMaster Host Adapter
> detected at\n", NULL);
> - blogic_notice("BusLogic: PCI Bus %d Device %d I/O
> Address 0x%lX PCI Address 0x%lX\n", NULL, bus, device, io_addr, pci_addr);
> + blogic_notice(NULL, "BusLogic: PCI MultiMaster Host
> Adapter detected at\n");
> + blogic_notice(NULL,
> + "BusLogic: PCI Bus %d Device %d I/O
> Address 0x%lX PCI Address 0x%lX\n",
> + bus, device, io_addr, pci_addr);
> }
> /*
> Issue the Inquire PCI Host Adapter Information command to
> determine
> @@ -819,7 +840,7 @@ static int __init blogic_init_mm_probeinfo(struct
> blogic_adapter *adapter)
> nonpr_mmcount++;
> mmcount++;
> } else
> - blogic_warn("BusLogic: Too many Host Adapters
> detected\n", NULL);
> + blogic_warn(NULL, "BusLogic: Too many Host Adapters
> detected\n");
> }
> /*
> If the AutoSCSI "Use Bus And Device # For PCI Scanning Seq."
> @@ -957,23 +978,37 @@ static int __init blogic_init_fp_probeinfo(struct
> blogic_adapter *adapter)
> pci_addr = base_addr1 = pci_resource_start(pci_device, 1);
> #ifdef CONFIG_SCSI_FLASHPOINT
> if (pci_resource_flags(pci_device, 0) & IORESOURCE_MEM) {
> - blogic_err("BusLogic: Base Address0 0x%lX not I/O for
> FlashPoint Host Adapter\n", NULL, base_addr0);
> - blogic_err("at PCI Bus %d Device %d I/O Address
> 0x%lX\n", NULL, bus, device, io_addr);
> + blogic_err(NULL,
> + "BusLogic: Base Address0 0x%lX not I/O for
> FlashPoint Host Adapter\n",
> + base_addr0);
> + blogic_err(NULL,
> + "at PCI Bus %d Device %d I/O Address
> 0x%lX\n",
> + bus, device, io_addr);
> continue;
> }
> if (pci_resource_flags(pci_device, 1) & IORESOURCE_IO) {
> - blogic_err("BusLogic: Base Address1 0x%lX not Memory
> for FlashPoint Host Adapter\n", NULL, base_addr1);
> - blogic_err("at PCI Bus %d Device %d PCI Address
> 0x%lX\n", NULL, bus, device, pci_addr);
> + blogic_err(NULL,
> + "BusLogic: Base Address1 0x%lX not Memory
> for FlashPoint Host Adapter\n",
> + base_addr1);
> + blogic_err(NULL,
> + "at PCI Bus %d Device %d PCI Address
> 0x%lX\n",
> + bus, device, pci_addr);
> continue;
> }
> if (irq_ch == 0) {
> - blogic_err("BusLogic: IRQ Channel %d invalid for
> FlashPoint Host Adapter\n", NULL, irq_ch);
> - blogic_err("at PCI Bus %d Device %d I/O Address
> 0x%lX\n", NULL, bus, device, io_addr);
> + blogic_err(NULL,
> + "BusLogic: IRQ Channel %d invalid for
> FlashPoint Host Adapter\n",
> + irq_ch);
> + blogic_err(NULL,
> + "at PCI Bus %d Device %d I/O Address
> 0x%lX\n",
> + bus, device, io_addr);
> continue;
> }
> if (blogic_global_options.trace_probe) {
> - blogic_notice("BusLogic: FlashPoint Host Adapter
> detected at\n", NULL);
> - blogic_notice("BusLogic: PCI Bus %d Device %d I/O
> Address 0x%lX PCI Address 0x%lX\n", NULL, bus, device, io_addr, pci_addr);
> + blogic_notice(NULL, "BusLogic: FlashPoint Host Adapter
> detected at\n");
> + blogic_notice(NULL,
> + "BusLogic: PCI Bus %d Device %d I/O
> Address 0x%lX PCI Address 0x%lX\n",
> + bus, device, io_addr, pci_addr);
> }
> if (blogic_probeinfo_count < BLOGIC_MAX_ADAPTERS) {
> struct blogic_probeinfo *probeinfo =
> @@ -988,11 +1023,15 @@ static int __init blogic_init_fp_probeinfo(struct
> blogic_adapter *adapter)
> probeinfo->pci_device = pci_dev_get(pci_device);
> fpcount++;
> } else
> - blogic_warn("BusLogic: Too many Host Adapters
> detected\n", NULL);
> + blogic_warn(NULL, "BusLogic: Too many Host Adapters
> detected\n");
> #else
> - blogic_err("BusLogic: FlashPoint Host Adapter detected at PCI
> Bus %d Device %d\n", NULL, bus, device);
> - blogic_err("BusLogic: I/O Address 0x%lX PCI Address 0x%lX, irq
> %d, but FlashPoint\n", NULL, io_addr, pci_addr, irq_ch);
> - blogic_err("BusLogic: support was omitted in this kernel
> configuration.\n", NULL);
> + blogic_err(NULL,
> + "BusLogic: FlashPoint Host Adapter detected at PCI
> Bus %d Device %d\n",
> + bus, device);
> + blogic_err(NULL,
> + "BusLogic: I/O Address 0x%lX PCI Address 0x%lX, irq
> %d, but FlashPoint\n",
> + io_addr, pci_addr, irq_ch);
> + blogic_err("BusLogic: support was omitted in this kernel
> configuration\n", NULL);
> #endif
> }
> /*
> @@ -1098,15 +1137,19 @@ static bool blogic_failure(struct blogic_adapter
> *adapter, char *msg)
> {
> blogic_announce_drvr(adapter);
> if (adapter->adapter_bus_type == BLOGIC_PCI_BUS) {
> - blogic_err("While configuring BusLogic PCI Host Adapter at\n",
> - adapter);
> - blogic_err("Bus %d Device %d I/O Address 0x%lX PCI Address
> 0x%lX:\n", adapter, adapter->bus, adapter->dev, adapter->io_addr,
> adapter->pci_addr);
> + blogic_err(adapter, "While configuring BusLogic PCI Host
> Adapter at\n");
> + blogic_err(adapter,
> + "Bus %d Device %d I/O Address 0x%lX PCI Address
> 0x%lX:\n",
> + adapter->bus, adapter->dev, adapter->io_addr,
> + adapter->pci_addr);
> } else
> - blogic_err("While configuring BusLogic Host Adapter at I/O
> Address 0x%lX:\n", adapter, adapter->io_addr);
> - blogic_err("%s FAILED - DETACHING\n", adapter, msg);
> + blogic_err(adapter,
> + "While configuring BusLogic Host Adapter at I/O
> Address 0x%lX:\n",
> + adapter->io_addr);
> + blogic_err(adapter, "%s FAILED - DETACHING\n", msg);
> if (blogic_cmd_failure_reason != NULL)
> - blogic_err("ADDITIONAL FAILURE INFO - %s\n", adapter,
> - blogic_cmd_failure_reason);
> + blogic_err(adapter, "ADDITIONAL FAILURE INFO - %s\n",
> + blogic_cmd_failure_reason);
> return false;
> }
>
> @@ -1130,13 +1173,20 @@ static bool __init blogic_probe(struct blogic_adapter
> *adapter)
> fpinfo->present = false;
> if (!(FlashPoint_ProbeHostAdapter(fpinfo) == 0 &&
> fpinfo->present)) {
> - blogic_err("BusLogic: FlashPoint Host Adapter detected
> at PCI Bus %d Device %d\n", adapter, adapter->bus, adapter->dev);
> - blogic_err("BusLogic: I/O Address 0x%lX PCI Address
> 0x%lX, but FlashPoint\n", adapter, adapter->io_addr, adapter->pci_addr);
> - blogic_err("BusLogic: Probe Function failed to validate
> it.\n", adapter);
> + blogic_err(adapter,
> + "BusLogic: FlashPoint Host Adapter detected
> at PCI Bus %d Device %d\n",
> + adapter->bus, adapter->dev);
> + blogic_err(adapter,
> + "BusLogic: I/O Address 0x%lX PCI Address
> 0x%lX, but FlashPoint\n",
> + adapter->io_addr, adapter->pci_addr);
> + blogic_err(adapter,
> + "BusLogic: Probe Function failed to validate
> it\n");
> return false;
> }
> if (blogic_global_options.trace_probe)
> - blogic_notice("BusLogic_Probe(0x%lX): FlashPoint
> Found\n", adapter, adapter->io_addr);
> + blogic_notice(adapter,
> + "BusLogic_Probe(0x%lX): FlashPoint
> Found\n",
> + adapter->io_addr);
> /*
> Indicate the Host Adapter Probe completed successfully.
> */
> @@ -1153,7 +1203,10 @@ static bool __init blogic_probe(struct blogic_adapter
> *adapter)
> intreg.all = blogic_rdint(adapter);
> georeg.all = blogic_rdgeom(adapter);
> if (blogic_global_options.trace_probe)
> - blogic_notice("BusLogic_Probe(0x%lX): Status 0x%02X, Interrupt
> 0x%02X, Geometry 0x%02X\n", adapter, adapter->io_addr, statusreg.all,
> intreg.all, georeg.all);
> + blogic_notice(adapter,
> + "BusLogic_Probe(0x%lX): Status 0x%02X, Interrupt
> 0x%02X, Geometry 0x%02X\n",
> + adapter->io_addr, statusreg.all, intreg.all,
> + georeg.all);
> if (statusreg.all == 0 || statusreg.sr.diag_active ||
> statusreg.sr.cmd_param_busy || statusreg.sr.rsvd ||
> statusreg.sr.cmd_invalid || intreg.ir.rsvd != 0)
> @@ -1232,7 +1285,9 @@ static bool blogic_hwreset(struct blogic_adapter
> *adapter, bool hard_reset)
> udelay(100);
> }
> if (blogic_global_options.trace_hw_reset)
> - blogic_notice("BusLogic_HardwareReset(0x%lX): Diagnostic
> Active, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
> + blogic_notice(adapter,
> + "BusLogic_HardwareReset(0x%lX): Diagnostic
> Active, Status 0x%02X\n",
> + adapter->io_addr, statusreg.all);
> if (timeout < 0)
> return false;
> /*
> @@ -1252,7 +1307,9 @@ static bool blogic_hwreset(struct blogic_adapter
> *adapter, bool hard_reset)
> udelay(100);
> }
> if (blogic_global_options.trace_hw_reset)
> - blogic_notice("BusLogic_HardwareReset(0x%lX): Diagnostic
> Completed, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
> + blogic_notice(adapter,
> + "BusLogic_HardwareReset(0x%lX): Diagnostic
> Completed, Status 0x%02X\n",
> + adapter->io_addr, statusreg.all);
> if (timeout < 0)
> return false;
> /*
> @@ -1268,7 +1325,9 @@ static bool blogic_hwreset(struct blogic_adapter
> *adapter, bool hard_reset)
> udelay(100);
> }
> if (blogic_global_options.trace_hw_reset)
> - blogic_notice("BusLogic_HardwareReset(0x%lX): Host Adapter
> Ready, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
> + blogic_notice(adapter,
> + "BusLogic_HardwareReset(0x%lX): Host Adapter
> Ready, Status 0x%02X\n",
> + adapter->io_addr, statusreg.all);
> if (timeout < 0)
> return false;
> /*
> @@ -1280,11 +1339,11 @@ static bool blogic_hwreset(struct blogic_adapter
> *adapter, bool hard_reset)
> if (statusreg.sr.diag_failed || !statusreg.sr.adapter_ready) {
> blogic_cmd_failure_reason = NULL;
> blogic_failure(adapter, "HARD RESET DIAGNOSTICS");
> - blogic_err("HOST ADAPTER STATUS REGISTER = %02X\n", adapter,
> - statusreg.all);
> + blogic_err(adapter, "HOST ADAPTER STATUS REGISTER = %02X\n",
> + statusreg.all);
> if (statusreg.sr.datain_ready)
> - blogic_err("HOST ADAPTER ERROR CODE = %d\n", adapter,
> - blogic_rddatain(adapter));
> + blogic_err(adapter, "HOST ADAPTER ERROR CODE = %d\n",
> + blogic_rddatain(adapter));
> return false;
> }
> /*
> @@ -1324,9 +1383,10 @@ static bool __init blogic_checkadapter(struct
> blogic_adapter *adapter)
> Provide tracing information if requested and return.
> */
> if (blogic_global_options.trace_probe)
> - blogic_notice("BusLogic_Check(0x%lX): MultiMaster %s\n",
> adapter,
> - adapter->io_addr,
> - (result ? "Found" : "Not Found"));
> + blogic_notice(adapter,
> + "BusLogic_Check(0x%lX): MultiMaster %s\n",
> + adapter->io_addr,
> + (result ? "Found" : "Not Found"));
> return result;
> }
>
> @@ -1836,30 +1896,40 @@ static bool __init blogic_reportconfig(struct
> blogic_adapter *adapter)
> char *tagq_msg = tagq_str;
> int tgt_id;
>
> - blogic_info("Configuring BusLogic Model %s %s%s%s%s SCSI Host
> Adapter\n", adapter, adapter->model,
> blogic_adapter_busnames[adapter->adapter_bus_type], (adapter->wide ? " Wide"
> : ""), (adapter->differential ? " Differential" : ""), (adapter->ultra ? "
> Ultra" : ""));
> - blogic_info(" Firmware Version: %s, I/O Address: 0x%lX, IRQ Channel:
> %d/%s\n", adapter, adapter->fw_ver, adapter->io_addr, adapter->irq_ch,
> (adapter->level_int ? "Level" : "Edge"));
> + blogic_info(adapter,
> + "Configuring BusLogic Model %s %s%s%s%s SCSI Host
> Adapter\n",
> + adapter->model,
> + blogic_adapter_busnames[adapter->adapter_bus_type],
> + (adapter->wide ? " Wide" : ""),
> + (adapter->differential ? " Differential" : ""),
> + (adapter->ultra ? " Ultra" : ""));
> + blogic_info(adapter,
> + " Firmware Version: %s, I/O Address: 0x%lX, IRQ Channel:
> %d/%s\n",
> + adapter->fw_ver, adapter->io_addr, adapter->irq_ch,
> + (adapter->level_int ? "Level" : "Edge"));
> if (adapter->adapter_bus_type != BLOGIC_PCI_BUS) {
> - blogic_info(" DMA Channel: ", adapter);
> + blogic_info(adapter, " DMA Channel: ");
> if (adapter->dma_ch > 0)
> - blogic_info("%d, ", adapter, adapter->dma_ch);
> + blogic_cont(adapter, "%d, ", adapter->dma_ch);
> else
> - blogic_info("None, ", adapter);
> + blogic_cont(adapter, "None, ");
> if (adapter->bios_addr > 0)
> - blogic_info("BIOS Address: 0x%lX, ", adapter,
> - adapter->bios_addr);
> + blogic_cont(adapter, "BIOS Address: 0x%X, ",
> + adapter->bios_addr);
> else
> - blogic_info("BIOS Address: None, ", adapter);
> + blogic_cont(adapter, "BIOS Address: None, ");
> } else {
> - blogic_info(" PCI Bus: %d, Device: %d, Address: ", adapter,
> - adapter->bus, adapter->dev);
> + blogic_cont(adapter, " PCI Bus: %d, Device: %d, Address: ",
> + adapter->bus, adapter->dev);
> if (adapter->pci_addr > 0)
> - blogic_info("0x%lX, ", adapter, adapter->pci_addr);
> + blogic_cont(adapter, "0x%lX, ", adapter->pci_addr);
> else
> - blogic_info("Unassigned, ", adapter);
> + blogic_cont(adapter, "Unassigned, ");
> }
> - blogic_info("Host Adapter SCSI ID: %d\n", adapter, adapter->scsi_id);
> - blogic_info(" Parity Checking: %s, Extended Translation: %s\n",
> - adapter, (adapter->parity ? "Enabled" : "Disabled"),
> + blogic_cont(adapter, "Host Adapter SCSI ID: %d\n", adapter->scsi_id);
> + blogic_info(adapter,
> + " Parity Checking: %s, Extended Translation: %s\n",
> + (adapter->parity ? "Enabled" : "Disabled"),
> (adapter->ext_trans_enable ? "Enabled" : "Disabled"));
> alltgt_mask &= ~(1 << adapter->scsi_id);
> sync_ok = adapter->sync_ok & alltgt_mask;
> @@ -1928,16 +1998,25 @@ static bool __init blogic_reportconfig(struct
> blogic_adapter *adapter)
> tagq_str[adapter->scsi_id] = '#';
> tagq_str[adapter->maxdev] = '\0';
> }
> - blogic_info(" Synchronous Negotiation: %s, Wide Negotiation: %s\n",
> - adapter, syncmsg, widemsg);
> - blogic_info(" Disconnect/Reconnect: %s, Tagged Queuing: %s\n", adapter,
> - discon_msg, tagq_msg);
> + blogic_info(adapter,
> + " Synchronous Negotiation: %s, Wide Negotiation: %s\n",
> + syncmsg, widemsg);
> + blogic_info(adapter,
> + " Disconnect/Reconnect: %s, Tagged Queuing: %s\n",
> + discon_msg, tagq_msg);
> if (blogic_multimaster_type(adapter)) {
> - blogic_info(" Scatter/Gather Limit: %d of %d segments,
> Mailboxes: %d\n", adapter, adapter->drvr_sglimit, adapter->adapter_sglimit,
> adapter->mbox_count);
> - blogic_info(" Driver Queue Depth: %d, Host Adapter Queue
> Depth: %d\n", adapter, adapter->drvr_qdepth, adapter->adapter_qdepth);
> + blogic_info(adapter,
> + " Scatter/Gather Limit: %d of %d segments,
> Mailboxes: %d\n",
> + adapter->drvr_sglimit, adapter->adapter_sglimit,
> + adapter->mbox_count);
> + blogic_info(adapter,
> + " Driver Queue Depth: %d, Host Adapter Queue
> Depth: %d\n",
> + adapter->drvr_qdepth, adapter->adapter_qdepth);
> } else
> - blogic_info(" Driver Queue Depth: %d, Scatter/Gather Limit: %d
> segments\n", adapter, adapter->drvr_qdepth, adapter->drvr_sglimit);
> - blogic_info(" Tagged Queue Depth: ", adapter);
> + blogic_info(adapter,
> + " Driver Queue Depth: %d, Scatter/Gather Limit: %d
> segments\n",
> + adapter->drvr_qdepth, adapter->drvr_sglimit);
> + blogic_info(adapter, " Tagged Queue Depth: ");
> common_tagq_depth = true;
> for (tgt_id = 1; tgt_id < adapter->maxdev; tgt_id++)
> if (adapter->qdepth[tgt_id] != adapter->qdepth[0]) {
> @@ -1946,24 +2025,28 @@ static bool __init blogic_reportconfig(struct
> blogic_adapter *adapter)
> }
> if (common_tagq_depth) {
> if (adapter->qdepth[0] > 0)
> - blogic_info("%d", adapter, adapter->qdepth[0]);
> + blogic_cont(adapter, "%d", adapter->qdepth[0]);
> else
> - blogic_info("Automatic", adapter);
> + blogic_cont(adapter, "Automatic");
> } else
> - blogic_info("Individual", adapter);
> - blogic_info(", Untagged Queue Depth: %d\n", adapter,
> - adapter->untag_qdepth);
> + blogic_cont(adapter, "Individual");
> + blogic_cont(adapter, ", Untagged Queue Depth: %d\n",
> + adapter->untag_qdepth);
> if (adapter->terminfo_valid) {
> if (adapter->wide)
> - blogic_info(" SCSI Bus Termination: %s", adapter,
> - (adapter->low_term ? (adapter->high_term ?
> "Both Enabled" : "Low Enabled") : (adapter->high_term ? "High Enabled" :
> "Both Disabled")));
> + blogic_info(adapter, " SCSI Bus Termination: %s",
> + (adapter->low_term
> + ? (adapter->high_term ? "Both Enabled" :
> "Low Enabled")
> + : (adapter->high_term ? "High Enabled" :
> "Both Disabled")));
> else
> - blogic_info(" SCSI Bus Termination: %s", adapter,
> - (adapter->low_term ? "Enabled" : "Disabled"));
> + blogic_info(adapter, " SCSI Bus Termination: %s",
> + (adapter->low_term ? "Enabled" :
> "Disabled"));
> if (adapter->scam)
> - blogic_info(", SCAM: %s", adapter,
> - (adapter->scam_enabled ? (adapter->scam_lev2 ?
> "Enabled, Level 2" : "Enabled, Level 1") : "Disabled"));
> - blogic_info("\n", adapter);
> + blogic_cont(adapter, ", SCAM: %s",
> + (adapter->scam_enabled
> + ? (adapter->scam_lev2 ? "Enabled, Level 2"
> : "Enabled, Level 1")
> + : "Disabled"));
> + blogic_cont(adapter, "\n");
> }
> /*
> Indicate reporting the Host Adapter configuration completed
> @@ -1981,8 +2064,8 @@ static bool __init blogic_reportconfig(struct
> blogic_adapter *adapter)
> static bool __init blogic_getres(struct blogic_adapter *adapter)
> {
> if (adapter->irq_ch == 0) {
> - blogic_err("NO LEGAL INTERRUPT CHANNEL ASSIGNED - DETACHING\n",
> - adapter);
> + blogic_err(adapter,
> + "NO LEGAL INTERRUPT CHANNEL ASSIGNED - DETACHING\n");
> return false;
> }
> /*
> @@ -1990,8 +2073,9 @@ static bool __init blogic_getres(struct blogic_adapter
> *adapter)
> */
> if (request_irq(adapter->irq_ch, blogic_inthandler, IRQF_SHARED,
> adapter->full_model, adapter) < 0) {
> - blogic_err("UNABLE TO ACQUIRE IRQ CHANNEL %d - DETACHING\n",
> - adapter, adapter->irq_ch);
> + blogic_err(adapter,
> + "UNABLE TO ACQUIRE IRQ CHANNEL %d - DETACHING\n",
> + adapter->irq_ch);
> return false;
> }
> adapter->irq_acquired = true;
> @@ -2000,7 +2084,9 @@ static bool __init blogic_getres(struct blogic_adapter
> *adapter)
> */
> if (adapter->dma_ch > 0) {
> if (request_dma(adapter->dma_ch, adapter->full_model) < 0) {
> - blogic_err("UNABLE TO ACQUIRE DMA CHANNEL %d -
> DETACHING\n", adapter, adapter->dma_ch);
> + blogic_err(adapter,
> + "UNABLE TO ACQUIRE DMA CHANNEL %d -
> DETACHING\n",
> + adapter->dma_ch);
> return false;
> }
> set_dma_mode(adapter->dma_ch, DMA_MODE_CASCADE);
> @@ -2148,12 +2234,12 @@ static bool blogic_initadapter(struct blogic_adapter
> *adapter)
> */
> done:
> if (!adapter->adapter_initd) {
> - blogic_info("*** %s Initialized Successfully ***\n", adapter,
> - adapter->full_model);
> - blogic_info("\n", adapter);
> + blogic_info(adapter, "*** %s Initialized Successfully ***\n",
> + adapter->full_model);
> + blogic_info(adapter, "\n");
> } else
> - blogic_warn("*** %s Initialized Successfully ***\n", adapter,
> - adapter->full_model);
> + blogic_warn(adapter, "*** %s Initialized Successfully ***\n",
> + adapter->full_model);
> adapter->adapter_initd = true;
>
> /*
> @@ -2365,15 +2451,16 @@ static int __init blogic_init(void)
> kcalloc(BLOGIC_MAX_ADAPTERS, sizeof(struct blogic_probeinfo),
> GFP_KERNEL);
> if (blogic_probeinfo_list == NULL) {
> - blogic_err("BusLogic: Unable to allocate Probe Info List\n",
> - NULL);
> + blogic_err(NULL,
> + "BusLogic: Unable to allocate Probe Info List\n");
> return -ENOMEM;
> }
>
> adapter = kzalloc(sizeof(struct blogic_adapter), GFP_KERNEL);
> if (adapter == NULL) {
> kfree(blogic_probeinfo_list);
> - blogic_err("BusLogic: Unable to allocate Prototype Host
> Adapter\n", NULL);
> + blogic_err(NULL,
> + "BusLogic: Unable to allocate Prototype Host
> Adapter\n");
> return -ENOMEM;
> }
>
> @@ -2633,8 +2720,9 @@ static int blogic_resultcode(struct blogic_adapter
> *adapter,
> case BLOGIC_INVALID_OUTBOX_CODE:
> case BLOGIC_INVALID_CMD_CODE:
> case BLOGIC_BAD_CMD_PARAM:
> - blogic_warn("BusLogic Driver Protocol Error 0x%02X\n",
> - adapter, adapter_status);
> + blogic_warn(adapter,
> + "BusLogic Driver Protocol Error 0x%02X\n",
> + adapter_status);
> fallthrough;
> case BLOGIC_DATA_UNDERRUN:
> case BLOGIC_DATA_OVERRUN:
> @@ -2659,8 +2747,8 @@ static int blogic_resultcode(struct blogic_adapter
> *adapter,
> hoststatus = DID_RESET;
> break;
> default:
> - blogic_warn("Unknown Host Adapter Status 0x%02X\n", adapter,
> - adapter_status);
> + blogic_warn(adapter, "Unknown Host Adapter Status 0x%02X\n",
> + adapter_status);
> hoststatus = DID_ERROR;
> break;
> }
> @@ -2718,7 +2806,9 @@ static void blogic_scan_inbox(struct blogic_adapter
> *adapter)
> then there is most likely a bug in
> the Host Adapter firmware.
> */
> - blogic_warn("Illegal CCB #%ld status %d in
> Incoming Mailbox\n", adapter, ccb->serial, ccb->status);
> + blogic_warn(adapter,
> + "Illegal CCB #%ld status %d in
> Incoming Mailbox\n",
> + ccb->serial, ccb->status);
> }
> }
> next_inbox->comp_code = BLOGIC_INBOX_FREE;
> @@ -2753,7 +2843,9 @@ static void blogic_process_ccbs(struct blogic_adapter
> *adapter)
> if (ccb->opcode == BLOGIC_BDR) {
> int tgt_id = ccb->tgt_id;
>
> - blogic_warn("Bus Device Reset CCB #%ld to Target %d
> Completed\n", adapter, ccb->serial, tgt_id);
> + blogic_warn(adapter,
> + "Bus Device Reset CCB #%ld to Target %d
> Completed\n",
> + ccb->serial, tgt_id);
> blogic_inc_count(&adapter->tgt_stats[tgt_id].bdr_done);
> adapter->tgt_flags[tgt_id].tagq_active = false;
> adapter->cmds_since_rst[tgt_id] = 0;
> @@ -2806,7 +2898,9 @@ static void blogic_process_ccbs(struct blogic_adapter
> *adapter)
> case BLOGIC_INBOX_FREE:
> case BLOGIC_CMD_NOTFOUND:
> case BLOGIC_INVALID_CCB:
> - blogic_warn("CCB #%ld to Target %d Impossible
> State\n", adapter, ccb->serial, ccb->tgt_id);
> + blogic_warn(adapter,
> + "CCB #%ld to Target %d Impossible
> State\n",
> + ccb->serial, ccb->tgt_id);
> break;
> case BLOGIC_CMD_COMPLETE_GOOD:
> adapter->tgt_stats[ccb->tgt_id]
> @@ -2816,8 +2910,9 @@ static void blogic_process_ccbs(struct blogic_adapter
> *adapter)
> command->result = DID_OK << 16;
> break;
> case BLOGIC_CMD_ABORT_BY_HOST:
> - blogic_warn("CCB #%ld to Target %d Aborted\n",
> - adapter, ccb->serial, ccb->tgt_id);
> + blogic_warn(adapter,
> + "CCB #%ld to Target %d Aborted\n",
> + ccb->serial, ccb->tgt_id);
>
> blogic_inc_count(&adapter->tgt_stats[ccb->tgt_id].aborts_done);
> command->result = DID_ABORT << 16;
> break;
> @@ -2829,16 +2924,26 @@ static void blogic_process_ccbs(struct blogic_adapter
> *adapter)
> .cmds_complete++;
> if (blogic_global_options.trace_err) {
> int i;
> - blogic_notice("CCB #%ld Target
> %d: Result %X Host "
> - "Adapter Status
> %02X Target Status %02X\n", adapter, ccb->serial, ccb->tgt_id,
> command->result, ccb->adapter_status, ccb->tgt_status);
> - blogic_notice("CDB ",
> adapter);
> + blogic_notice(adapter,
> + "CCB #%ld Target
> %d: Result %X Host Adapter Status %02X Target Status %02X\n",
> + ccb->serial,
> + ccb->tgt_id,
> + command->result,
> +
> ccb->adapter_status,
> + ccb->tgt_status);
> + blogic_notice(adapter,
> + "CDB ");
> for (i = 0; i < ccb->cdblen;
> i++)
> - blogic_notice(" %02X",
> adapter, ccb->cdb[i]);
> - blogic_notice("\n", adapter);
> - blogic_notice("Sense ",
> adapter);
> + blogic_cont(adapter,
> + " %02X",
> +
> ccb->cdb[i]);
> + blogic_cont(adapter, "\n");
> + blogic_notice(adapter, "Sense
> ");
> for (i = 0; i <
> ccb->sense_datalen; i++)
> - blogic_notice(" %02X",
> adapter, command->sense_buffer[i]);
> - blogic_notice("\n", adapter);
> + blogic_cont(adapter,
> + " %02X",
> +
> command->sense_buffer[i]);
> + blogic_cont(adapter, "\n");
> }
> }
> break;
> @@ -2925,7 +3030,8 @@ static irqreturn_t blogic_inthandler(int irq_ch, void
> *devid)
> adapter->adapter_extreset = true;
> break;
> case FPOINT_INTERN_ERR:
> - blogic_warn("Internal FlashPoint Error detected
> - Resetting Host Adapter\n", adapter);
> + blogic_warn(adapter,
> + "Internal FlashPoint Error detected
> - Resetting Host Adapter\n");
> adapter->adapter_intern_err = true;
> break;
> }
> @@ -2939,12 +3045,16 @@ static irqreturn_t blogic_inthandler(int irq_ch, void
> *devid)
> Reset the Host Adapter if requested.
> */
> if (adapter->adapter_extreset) {
> - blogic_warn("Resetting %s due to External SCSI Bus Reset\n",
> adapter, adapter->full_model);
> + blogic_warn(adapter,
> + "Resetting %s due to External SCSI Bus Reset\n",
> + adapter->full_model);
> blogic_inc_count(&adapter->ext_resets);
> blogic_resetadapter(adapter, false);
> adapter->adapter_extreset = false;
> } else if (adapter->adapter_intern_err) {
> - blogic_warn("Resetting %s due to Host Adapter Internal
> Error\n", adapter, adapter->full_model);
> + blogic_warn(adapter,
> + "Resetting %s due to Host Adapter Internal Error\n",
> + adapter->full_model);
> blogic_inc_count(&adapter->adapter_intern_errors);
> blogic_resetadapter(adapter, true);
> adapter->adapter_intern_err = false;
> @@ -3142,8 +3252,9 @@ static int blogic_qcmd_lck(struct scsi_cmnd *command,
> && tgt_flags->tagq_ok &&
> (adapter->tagq_ok & (1 << tgt_id))) {
> tgt_flags->tagq_active = true;
> - blogic_notice("Tagged Queuing now active for Target %d\n",
> - adapter, tgt_id);
> + blogic_notice(adapter,
> + "Tagged Queuing now active for Target %d\n",
> + tgt_id);
> }
> if (tgt_flags->tagq_active) {
> enum blogic_queuetag queuetag = BLOGIC_SIMPLETAG;
> @@ -3184,8 +3295,8 @@ static int blogic_qcmd_lck(struct scsi_cmnd *command,
> command->sense_buffer, ccb->sense_datalen,
> DMA_FROM_DEVICE);
> if (dma_mapping_error(&adapter->pci_device->dev, sense_buf)) {
> - blogic_err("DMA mapping for sense data buffer failed\n",
> - adapter);
> + blogic_err(adapter,
> + "DMA mapping for sense data buffer failed\n");
> blogic_dealloc_ccb(ccb, 0);
> return SCSI_MLQUEUE_HOST_BUSY;
> }
> @@ -3204,12 +3315,12 @@ static int blogic_qcmd_lck(struct scsi_cmnd *command,
> */
> if (!blogic_write_outbox(adapter, BLOGIC_MBOX_START, ccb)) {
> spin_unlock_irq(adapter->scsi_host->host_lock);
> - blogic_warn("Unable to write Outgoing Mailbox - Pausing
> for 1 second\n", adapter);
> + blogic_warn(adapter, "Unable to write Outgoing Mailbox
> - Pausing for 1 second\n");
> blogic_delay(1);
> spin_lock_irq(adapter->scsi_host->host_lock);
> if (!blogic_write_outbox(adapter, BLOGIC_MBOX_START,
> ccb)) {
> - blogic_warn("Still unable to write Outgoing
> Mailbox - Host Adapter Dead?\n", adapter);
> + blogic_warn(adapter, "Still unable to write
> Outgoing Mailbox - Host Adapter Dead?\n");
> blogic_dealloc_ccb(ccb, 1);
> command->result = DID_ERROR << 16;
> command->scsi_done(command);
> @@ -3259,13 +3370,16 @@ static int blogic_abort(struct scsi_cmnd *command)
> if (ccb->command == command)
> break;
> if (ccb == NULL) {
> - blogic_warn("Unable to Abort Command to Target %d - No CCB
> Found\n", adapter, tgt_id);
> + blogic_warn(adapter, "Unable to Abort Command to Target %d - No
> CCB Found\n",
> + tgt_id);
> return SUCCESS;
> } else if (ccb->status == BLOGIC_CCB_COMPLETE) {
> - blogic_warn("Unable to Abort Command to Target %d - CCB
> Completed\n", adapter, tgt_id);
> + blogic_warn(adapter, "Unable to Abort Command to Target %d -
> CCB Completed\n",
> + tgt_id);
> return SUCCESS;
> } else if (ccb->status == BLOGIC_CCB_RESET) {
> - blogic_warn("Unable to Abort Command to Target %d - CCB
> Reset\n", adapter, tgt_id);
> + blogic_warn(adapter, "Unable to Abort Command to Target %d -
> CCB Reset\n",
> + tgt_id);
> return SUCCESS;
> }
> if (blogic_multimaster_type(adapter)) {
> @@ -3283,16 +3397,18 @@ static int blogic_abort(struct scsi_cmnd *command)
> */
> if (adapter->tgt_flags[tgt_id].tagq_active &&
> adapter->fw_ver[0] < '5') {
> - blogic_warn("Unable to Abort CCB #%ld to Target %d -
> Abort Tag Not Supported\n", adapter, ccb->serial, tgt_id);
> + blogic_warn(adapter, "Unable to Abort CCB #%ld to
> Target %d - Abort Tag Not Supported\n",
> + ccb->serial, tgt_id);
> return FAILURE;
> } else if (blogic_write_outbox(adapter, BLOGIC_MBOX_ABORT,
> ccb)) {
> - blogic_warn("Aborting CCB #%ld to Target %d\n",
> - adapter, ccb->serial, tgt_id);
> + blogic_warn(adapter, "Aborting CCB #%ld to Target %d\n",
> + ccb->serial, tgt_id);
>
> blogic_inc_count(&adapter->tgt_stats[tgt_id].aborts_tried);
> return SUCCESS;
> } else {
> - blogic_warn("Unable to Abort CCB #%ld to Target %d - No
> Outgoing Mailboxes\n", adapter, ccb->serial, tgt_id);
> + blogic_warn(adapter, "Unable to Abort CCB #%ld to
> Target %d - No Outgoing Mailboxes\n",
> + ccb->serial, tgt_id);
> return FAILURE;
> }
> } else {
> @@ -3300,8 +3416,8 @@ static int blogic_abort(struct scsi_cmnd *command)
> Call the FlashPoint SCCB Manager to abort execution of
> the CCB.
> */
> - blogic_warn("Aborting CCB #%ld to Target %d\n", adapter,
> - ccb->serial, tgt_id);
> + blogic_warn(adapter, "Aborting CCB #%ld to Target %d\n",
> + ccb->serial, tgt_id);
> blogic_inc_count(&adapter->tgt_stats[tgt_id].aborts_tried);
> FlashPoint_AbortCCB(adapter->cardhandle, ccb);
> /*
> @@ -3333,8 +3449,8 @@ static int blogic_resetadapter(struct blogic_adapter
> *adapter, bool hard_reset)
>
> if (!(blogic_hwreset(adapter, hard_reset) &&
> blogic_initadapter(adapter))) {
> - blogic_err("Resetting %s Failed\n", adapter,
> - adapter->full_model);
> + blogic_err(adapter, "Resetting %s Failed\n",
> + adapter->full_model);
> return FAILURE;
> }
>
> @@ -3443,10 +3559,15 @@ static int blogic_diskparam(struct scsi_device *sdev,
> struct block_device *dev,
> diskparam->cylinders = (unsigned long) capacity /
> (diskparam->heads * diskparam->sectors);
> if (part_no < 4 && part_end_sector == diskparam->sectors) {
> if (diskparam->cylinders != saved_cyl)
> - blogic_warn("Adopting Geometry %d/%d from
> Partition Table\n", adapter, diskparam->heads, diskparam->sectors);
> + blogic_warn(adapter,
> + "Adopting Geometry %d/%d from
> Partition Table\n",
> + diskparam->heads,
> + diskparam->sectors);
> } else if (part_end_head > 0 || part_end_sector > 0) {
> - blogic_warn("Warning: Partition Table appears to have
> Geometry %d/%d which is\n", adapter, part_end_head + 1, part_end_sector);
> - blogic_warn("not compatible with current BusLogic Host
> Adapter Geometry %d/%d\n", adapter, diskparam->heads, diskparam->sectors);
> + blogic_warn(adapter,
> + "Warning: Partition Table appears to have
> Geometry %d/%d which is not compatible with current BusLogic Host Adapter
> Geometry %d/%d\n",
> + part_end_head + 1, part_end_sector,
> + diskparam->heads, diskparam->sectors);
> }
> }
> kfree(buf);
> @@ -3571,6 +3692,7 @@ Target Requested Completed Requested Completed
> Requested Completed\n\
> }
> seq_printf(m, "\nExternal Host Adapter Resets: %d\n",
> adapter->ext_resets);
> seq_printf(m, "Host Adapter Internal Errors: %d\n",
> adapter->adapter_intern_errors);
> +
> return 0;
> }
>
> @@ -3579,41 +3701,51 @@ Target Requested Completed Requested
> Completed Requested Completed\n\
> blogic_msg prints Driver Messages.
> */
>
> -static void blogic_msg(enum blogic_msglevel msglevel, char *fmt,
> - struct blogic_adapter *adapter, ...)
> +static void blogic_msg(enum blogic_msglevel msglevel,
> + struct blogic_adapter *adapter, const char *fmt, ...)
> {
> static char buf[BLOGIC_LINEBUF_SIZE];
> - static bool begin = true;
> va_list args;
> int len = 0;
> + const char *kern_level = blogic_msglevelmap[msglevel];
>
> - va_start(args, adapter);
> - len = vsprintf(buf, fmt, args);
> + va_start(args, fmt);
> + len = vscnprintf(buf, sizeof(buf), fmt, args);
> va_end(args);
> - if (msglevel == BLOGIC_ANNOUNCE_LEVEL) {
> +
> + switch (msglevel) {
> + case BLOGIC_ANNOUNCE_LEVEL: {
> static int msglines = 0;
> +
> strcpy(&adapter->msgbuf[adapter->msgbuflen], buf);
> adapter->msgbuflen += len;
> if (++msglines <= 2)
> - printk("%sscsi: %s", blogic_msglevelmap[msglevel], buf);
> - } else if (msglevel == BLOGIC_INFO_LEVEL) {
> + printk("%sscsi: %s", kern_level, buf);
> + break;
> + }
> +
> + case BLOGIC_INFO_LEVEL:
> strcpy(&adapter->msgbuf[adapter->msgbuflen], buf);
> adapter->msgbuflen += len;
> - if (begin) {
> - if (buf[0] != '\n' || len > 1)
> - printk("%sscsi%d: %s",
> blogic_msglevelmap[msglevel], adapter->host_no, buf);
> - } else
> - printk("%s", buf);
> - } else {
> - if (begin) {
> - if (adapter != NULL && adapter->adapter_initd)
> - printk("%sscsi%d: %s",
> blogic_msglevelmap[msglevel], adapter->host_no, buf);
> - else
> - printk("%s%s", blogic_msglevelmap[msglevel],
> buf);
> - } else
> - printk("%s", buf);
> + if (buf[0] != '\n' || len > 1)
> + printk("%sscsi%d: %s",
> + kern_level, adapter->host_no, buf);
> + break;
> +
> + case BLOGIC_CONT_LEVEL:
> + strcpy(&adapter->msgbuf[adapter->msgbuflen], buf);
> + adapter->msgbuflen += len;
> + printk("%s%s", kern_level, buf);
> + break;
> +
> + default:
> + if (adapter && adapter->adapter_initd)
> + printk("%sscsi%d: %s",
> + kern_level, adapter->host_no, buf);
> + else
> + printk("%s%s", kern_level, buf);
> + break;
> }
> - begin = (buf[len - 1] == '\n');
> }
>
>
> @@ -3691,7 +3823,9 @@ static int __init blogic_parseopts(char *options)
> blogic_probe_options.probe134 = true;
> break;
> default:
> - blogic_err("BusLogic: Invalid Driver
> Options (invalid I/O Address 0x%lX)\n", NULL, io_addr);
> + blogic_err(NULL,
> + "BusLogic: Invalid Driver
> Options (invalid I/O Address 0x%lX)\n",
> + io_addr);
> return 0;
> }
> } else if (blogic_parse(&options, "NoProbeISA"))
> @@ -3712,7 +3846,9 @@ static int __init blogic_parseopts(char *options)
> for (tgt_id = 0; tgt_id < BLOGIC_MAXDEV;
> tgt_id++) {
> unsigned short qdepth =
> simple_strtoul(options, &options, 0);
> if (qdepth > BLOGIC_MAX_TAG_DEPTH) {
> - blogic_err("BusLogic: Invalid
> Driver Options (invalid Queue Depth %d)\n", NULL, qdepth);
> + blogic_err(NULL,
> + "BusLogic: Invalid
> Driver Options (invalid Queue Depth %d)\n",
> + qdepth);
> return 0;
> }
> drvr_opts->qdepth[tgt_id] = qdepth;
> @@ -3721,12 +3857,16 @@ static int __init blogic_parseopts(char *options)
> else if (*options == ']')
> break;
> else {
> - blogic_err("BusLogic: Invalid
> Driver Options (',' or ']' expected at '%s')\n", NULL, options);
> + blogic_err(NULL,
> + "BusLogic: Invalid
> Driver Options (',' or ']' expected at '%s')\n",
> + options);
> return 0;
> }
> }
> if (*options != ']') {
> - blogic_err("BusLogic: Invalid Driver
> Options (']' expected at '%s')\n", NULL, options);
> + blogic_err(NULL,
> + "BusLogic: Invalid Driver
> Options (']' expected at '%s')\n",
> + options);
> return 0;
> } else
> options++;
> @@ -3734,7 +3874,9 @@ static int __init blogic_parseopts(char *options)
> unsigned short qdepth = simple_strtoul(options,
> &options, 0);
> if (qdepth == 0 ||
> qdepth > BLOGIC_MAX_TAG_DEPTH) {
> - blogic_err("BusLogic: Invalid Driver
> Options (invalid Queue Depth %d)\n", NULL, qdepth);
> + blogic_err(NULL,
> + "BusLogic: Invalid Driver
> Options (invalid Queue Depth %d)\n",
> + qdepth);
> return 0;
> }
> drvr_opts->common_qdepth = qdepth;
> @@ -3780,7 +3922,9 @@ static int __init blogic_parseopts(char *options)
> unsigned short bus_settle_time =
> simple_strtoul(options, &options, 0);
> if (bus_settle_time > 5 * 60) {
> - blogic_err("BusLogic: Invalid Driver
> Options (invalid Bus Settle Time %d)\n", NULL, bus_settle_time);
> + blogic_err(NULL,
> + "BusLogic: Invalid Driver
> Options (invalid Bus Settle Time %d)\n",
> + bus_settle_time);
> return 0;
> }
> drvr_opts->bus_settle_time = bus_settle_time;
> @@ -3805,14 +3949,17 @@ static int __init blogic_parseopts(char *options)
> if (*options == ',')
> options++;
> else if (*options != ';' && *options != '\0') {
> - blogic_err("BusLogic: Unexpected Driver Option
> '%s' ignored\n", NULL, options);
> + blogic_err(NULL,
> + "BusLogic: Unexpected Driver Option
> '%s' ignored\n",
> + options);
> *options = '\0';
> }
> }
> if (!(blogic_drvr_options_count == 0 ||
> blogic_probeinfo_count == 0 ||
> blogic_drvr_options_count == blogic_probeinfo_count)) {
> - blogic_err("BusLogic: Invalid Driver Options (all or no
> I/O Addresses must be specified)\n", NULL);
> + blogic_err(NULL,
> + "BusLogic: Invalid Driver Options (all or no
> I/O Addresses must be specified)\n");
> return 0;
> }
> /*
> @@ -3866,7 +4013,8 @@ static int __init blogic_setup(char *str)
> (void) get_options(str, ARRAY_SIZE(ints), ints);
>
> if (ints[0] != 0) {
> - blogic_err("BusLogic: Obsolete Command Line Entry Format
> Ignored\n", NULL);
> + blogic_err(NULL,
> + "BusLogic: Obsolete Command Line Entry Format
> Ignored\n");
> return 0;
> }
> if (str == NULL || *str == '\0')
> diff --git a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h
> index 6182cc8a0344..42333fba6005 100644
> --- a/drivers/scsi/BusLogic.h
> +++ b/drivers/scsi/BusLogic.h
> @@ -108,30 +108,34 @@ enum blogic_msglevel {
> BLOGIC_INFO_LEVEL = 1,
> BLOGIC_NOTICE_LEVEL = 2,
> BLOGIC_WARN_LEVEL = 3,
> - BLOGIC_ERR_LEVEL = 4
> + BLOGIC_ERR_LEVEL = 4,
> + BLOGIC_CONT_LEVEL = 5,
> };
>
> -static char *blogic_msglevelmap[] = { KERN_NOTICE, KERN_NOTICE, KERN_NOTICE,
> KERN_WARNING, KERN_ERR };
> +static char *blogic_msglevelmap[] = { KERN_NOTICE, KERN_NOTICE, KERN_NOTICE,
> KERN_WARNING, KERN_ERR, KERN_CONT };
>
>
> /*
> Define Driver Message macros.
> */
>
> -#define blogic_announce(format, args...) \
> - blogic_msg(BLOGIC_ANNOUNCE_LEVEL, format, ##args)
> +#define blogic_announce(adapter, fmt, ...) \
> + blogic_msg(BLOGIC_ANNOUNCE_LEVEL, adapter, fmt, ##__VA_ARGS__)
>
> -#define blogic_info(format, args...) \
> - blogic_msg(BLOGIC_INFO_LEVEL, format, ##args)
> +#define blogic_cont(adapter, fmt, ...)
> \
> + blogic_msg(BLOGIC_CONT_LEVEL, adapter, fmt, ##__VA_ARGS__)
>
> -#define blogic_notice(format, args...) \
> - blogic_msg(BLOGIC_NOTICE_LEVEL, format, ##args)
> +#define blogic_info(adapter, fmt, ...)
> \
> + blogic_msg(BLOGIC_INFO_LEVEL, adapter, fmt, ##__VA_ARGS__)
>
> -#define blogic_warn(format, args...) \
> - blogic_msg(BLOGIC_WARN_LEVEL, format, ##args)
> +#define blogic_notice(adapter, fmt, ...) \
> + blogic_msg(BLOGIC_NOTICE_LEVEL, adapter, fmt, ##__VA_ARGS__)
>
> -#define blogic_err(format, args...) \
> - blogic_msg(BLOGIC_ERR_LEVEL, format, ##args)
> +#define blogic_warn(adapter, fmt, ...)
> \
> + blogic_msg(BLOGIC_WARN_LEVEL, adapter, fmt, ##__VA_ARGS__)
> +
> +#define blogic_err(adapter, fmt, ...)
> \
> + blogic_msg(BLOGIC_ERR_LEVEL, adapter, fmt, ##__VA_ARGS__)
>
>
> /*
> @@ -1289,7 +1293,9 @@ static int blogic_slaveconfig(struct scsi_device *);
> static void blogic_qcompleted_ccb(struct blogic_ccb *);
> static irqreturn_t blogic_inthandler(int, void *);
> static int blogic_resetadapter(struct blogic_adapter *, bool hard_reset);
> -static void blogic_msg(enum blogic_msglevel, char *, struct blogic_adapter
> *, ...);
> +__printf(3, 4)
> +static void blogic_msg(enum blogic_msglevel, struct blogic_adapter *adapter,
> + const char *fmt, ...);
> static int __init blogic_setup(char *);
>
> #endif /* _BUSLOGIC_H */
>
>
