On Thu, Mar 25, 2021 at 11:13:11AM +0800, Yunsheng Lin wrote:
> Lockless qdisc has below concurrent problem:
> cpu0 cpu1
> . .
> q->enqueue .
> . .
> qdisc_run_begin() .
> . .
> dequeue_skb() .
> . .
> sch_direct_xmit() .
> . .
> . q->enqueue
> . qdisc_run_begin()
> . return and do nothing
> . .
> qdisc_run_end() .
>
> cpu1 enqueue a skb without calling __qdisc_run() because cpu0
> has not released the lock yet and spin_trylock() return false
> for cpu1 in qdisc_run_begin(), and cpu0 do not see the skb
> enqueued by cpu1 when calling dequeue_skb() because cpu1 may
> enqueue the skb after cpu0 calling dequeue_skb() and before
> cpu0 calling qdisc_run_end().
>
> Lockless qdisc has below another concurrent problem when
> tx_action is involved:
>
> cpu0(serving tx_action) cpu1 cpu2
> . . .
> . q->enqueue .
> . qdisc_run_begin() .
> . dequeue_skb() .
> . . q->enqueue
> . . .
> . sch_direct_xmit() .
> . . qdisc_run_begin()
> . . return and do nothing
> . . .
> clear __QDISC_STATE_SCHED . .
> qdisc_run_begin() . .
> return and do nothing . .
> . . .
> . qdisc_run_end() .
>
> This patch fixes the above data race by:
> 1. Get the flag before doing spin_trylock().
> 2. If the first spin_trylock() return false and the flag is not
> set before the first spin_trylock(), Set the flag and retry
> another spin_trylock() in case other CPU may not see the new
> flag after it releases the lock.
> 3. reschedule if the flags is set after the lock is released
> at the end of qdisc_run_end().
>
> For tx_action case, the flags is also set when cpu1 is at the
> end if qdisc_run_end(), so tx_action will be rescheduled
> again to dequeue the skb enqueued by cpu2.
>
> Only clear the flag before retrying a dequeuing when dequeuing
> returns NULL in order to reduce the overhead of the above double
> spin_trylock() and __netif_schedule() calling.
>
> The performance impact of this patch, tested using pktgen and
> dummy netdev with pfifo_fast qdisc attached:
>
> threads without+this_patch with+this_patch delta
> 1 2.61Mpps 2.60Mpps -0.3%
> 2 3.97Mpps 3.82Mpps -3.7%
> 4 5.62Mpps 5.59Mpps -0.5%
> 8 2.78Mpps 2.77Mpps -0.3%
> 16 2.22Mpps 2.22Mpps -0.0%
>
> Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking")
> Signed-off-by: Yunsheng Lin <linyunsh...@huawei.com>
> ---
> V3: fix a compile error and a few comment typo, remove the
> __QDISC_STATE_DEACTIVATED checking, and update the
> performance data.
> V2: Avoid the overhead of fixing the data race as much as
> possible.
I tried this patch o top of 5.12-rc7 with real devices. I used two
machines with 10Gb/s Intel ixgbe NICs, sender has 16 CPUs (2 8-core CPUs
with HT disabled) and 16 Rx/Tx queues, receiver has 48 CPUs (2 12-core
CPUs with HT enabled) and 48 Rx/Tx queues. With multiple TCP streams on
a saturated ethernet, the CPU consumption grows quite a lot:
threads unpatched 5.12-rc7 5.12-rc7 + v3
1 25.6% 30.6%
8 73.1% 241.4%
128 132.2% 1012.0%
(The values are normalized to one core, i.e. 100% corresponds to one
fully used logical CPU.) I didn't perform a full statistical evaluation
but the growth is way beyond any statistical fluctuation with one
exception: 8-thread test of patched kernel showed values from 155.5% to
311.4%. Closer look shows that most of the CPU time was spent in softirq
and running top in parallel with the test confirms that there are
multiple ksofirqd threads running at 100% CPU. I had similar problem
with earlier versions of my patch (work in progress, I still need to
check some corner cases and write commit message explaining the logic)
and tracing confirmed that similar problem (non-empty queue, no other
thread going to clean it up but device queue stopped) was happening
repeatedly most of the time.
The biggest problem IMHO is that the loop in __qdisc_run() may finish
without rescheduling not only when the qdisc queue is empty but also
when the corresponding device Tx queue is stopped which devices tend to
do whenever they cannot send any more packets out. Thus whenever
__QDISC_STATE_NEED_RESCHEDULE is set with device queue stopped or
frozen, we keep rescheduling the queue cleanup without any chance to
progress or clear __QDISC_STATE_NEED_RESCHEDULE. For this to happen, all
we need is another thready to fail the first spin_trylock() while device
queue is stopped and qdisc queue not empty.
Another part of the problem may be that to avoid the race, the logic is
too pessimistic: consider e.g. (dotted lines show "barriers" where
ordering is important):
CPU A CPU B
spin_trylock() succeeds
pfifo_fast_enqueue()
..................................................................
skb_array empty, exit loop
first spin_trylock() fails
set __QDISC_STATE_NEED_RESCHEDULE
second spin_trylock() fails
..................................................................
spin_unlock()
call __netif_schedule()
When we switch the order of spin_lock() on CPU A and second
spin_trylock() on CPU B (but keep setting __QDISC_STATE_NEED_RESCHEDULE
before CPU A tests it), we end up scheduling a queue cleanup even if
there is already one running. And either of these is quite realistic.
> diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
> index f7a6e14..e3f46eb 100644
> --- a/include/net/sch_generic.h
> +++ b/include/net/sch_generic.h
> @@ -36,6 +36,7 @@ struct qdisc_rate_table {
> enum qdisc_state_t {
> __QDISC_STATE_SCHED,
> __QDISC_STATE_DEACTIVATED,
> + __QDISC_STATE_NEED_RESCHEDULE,
> };
I'm not sure if putting the flag here is a good idea. If you look at the
history of struct Qdisc reshufflings, this part (cacheline) should be
used for members which don't change too often. However, this new flag is
going to be touched about as often and in similar places as q->seqlock
or q->empty so that it should probably be in the last cacheline with
them.
[...]
> diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
> index 44991ea..4953430 100644
> --- a/net/sched/sch_generic.c
> +++ b/net/sched/sch_generic.c
> @@ -640,8 +640,10 @@ static struct sk_buff *pfifo_fast_dequeue(struct Qdisc
> *qdisc)
> {
> struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
> struct sk_buff *skb = NULL;
> + bool need_retry = true;
> int band;
>
> +retry:
> for (band = 0; band < PFIFO_FAST_BANDS && !skb; band++) {
> struct skb_array *q = band2list(priv, band);
>
> @@ -652,6 +654,16 @@ static struct sk_buff *pfifo_fast_dequeue(struct Qdisc
> *qdisc)
> }
> if (likely(skb)) {
> qdisc_update_stats_at_dequeue(qdisc, skb);
> + } else if (need_retry &&
> + test_and_clear_bit(__QDISC_STATE_NEED_RESCHEDULE,
> + &qdisc->state)) {
> + /* do another enqueuing after clearing the flag to
> + * avoid calling __netif_schedule().
> + */
> + smp_mb__after_atomic();
> + need_retry = false;
> +
> + goto retry;
> } else {
> WRITE_ONCE(qdisc->empty, true);
> }i
Does the retry really provide significant improvement? IIUC it only
helps if all of enqueue, first spin_trylock() failure and setting the
__QDISC_STATE_NEED_RESCHEDULE flag happen between us finding the
skb_array empty and checking the flag. If enqueue happens before we
check the array (and flag is set before the check), the retry is
useless. If the flag is set after we check it, we don't catch it (no
matter if the enqueue happened before or after we found skb_array
empty).
Michal
