VER_0 is used to describe device based on tsens version before v0.1.
These device are devices based on msm8960 for example apq8064 or
ipq806x. Add support for VER_0 in tsens.c and set the right tsens feat
in tsens-8960.c file.

Signed-off-by: Ansuel Smith <ansuels...@gmail.com>
Reviewed-by: Thara Gopinath <thara.gopin...@linaro.org>
Reported-by: kernel test robot <l...@intel.com>
Reported-by: Dan Carpenter <dan.carpen...@oracle.com>
---
 drivers/thermal/qcom/tsens-8960.c |   9 ++
 drivers/thermal/qcom/tsens.c      | 150 ++++++++++++++++++++++++------
 drivers/thermal/qcom/tsens.h      |   4 +-
 3 files changed, 133 insertions(+), 30 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-8960.c 
b/drivers/thermal/qcom/tsens-8960.c
index 0d0c2647d..0dd15e812 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -347,8 +347,17 @@ static const struct tsens_ops ops_8960 = {
        .resume         = resume_8960,
 };
 
+static struct tsens_features tsens_8960_feat = {
+       .ver_major      = VER_0,
+       .crit_int       = 0,
+       .adc            = 1,
+       .srot_split     = 0,
+       .max_sensors    = 11,
+};
+
 struct tsens_plat_data data_8960 = {
        .num_sensors    = 11,
        .ops            = &ops_8960,
+       .feat           = &tsens_8960_feat,
        .fields         = tsens_8960_regfields,
 };
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index 562c438ff..be0c5931f 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -12,6 +12,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
+#include <linux/mfd/syscon.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/regmap.h>
@@ -516,6 +517,15 @@ irqreturn_t tsens_irq_thread(int irq, void *data)
                        dev_dbg(priv->dev, "[%u] %s: no violation:  %d\n",
                                hw_id, __func__, temp);
                }
+
+               if (tsens_version(priv) < VER_0_1) {
+                       /* Constraint: There is only 1 interrupt control 
register for all
+                        * 11 temperature sensor. So monitoring more than 1 
sensor based
+                        * on interrupts will yield inconsistent result. To 
overcome this
+                        * issue we will monitor only sensor 0 which is the 
master sensor.
+                        */
+                       break;
+               }
        }
 
        return IRQ_HANDLED;
@@ -531,6 +541,13 @@ int tsens_set_trips(void *_sensor, int low, int high)
        int high_val, low_val, cl_high, cl_low;
        u32 hw_id = s->hw_id;
 
+       if (tsens_version(priv) < VER_0_1) {
+               /* Pre v0.1 IP had a single register for each type of interrupt
+                * and thresholds
+                */
+               hw_id = 0;
+       }
+
        dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n",
                hw_id, __func__, low, high);
 
@@ -585,18 +602,21 @@ int get_temp_tsens_valid(const struct tsens_sensor *s, 
int *temp)
        u32 valid;
        int ret;
 
-       ret = regmap_field_read(priv->rf[valid_idx], &valid);
-       if (ret)
-               return ret;
-       while (!valid) {
-               /* Valid bit is 0 for 6 AHB clock cycles.
-                * At 19.2MHz, 1 AHB clock is ~60ns.
-                * We should enter this loop very, very rarely.
-                */
-               ndelay(400);
+       /* VER_0 doesn't have VALID bit */
+       if (tsens_version(priv) >= VER_0_1) {
                ret = regmap_field_read(priv->rf[valid_idx], &valid);
                if (ret)
                        return ret;
+               while (!valid) {
+                       /* Valid bit is 0 for 6 AHB clock cycles.
+                        * At 19.2MHz, 1 AHB clock is ~60ns.
+                        * We should enter this loop very, very rarely.
+                        */
+                       ndelay(400);
+                       ret = regmap_field_read(priv->rf[valid_idx], &valid);
+                       if (ret)
+                               return ret;
+               }
        }
 
        /* Valid bit is set, OK to read the temperature */
@@ -609,15 +629,29 @@ int get_temp_common(const struct tsens_sensor *s, int 
*temp)
 {
        struct tsens_priv *priv = s->priv;
        int hw_id = s->hw_id;
-       int last_temp = 0, ret;
+       int last_temp = 0, ret, trdy;
+       unsigned long timeout;
 
-       ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp);
-       if (ret)
-               return ret;
+       timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
+       do {
+               if (tsens_version(priv) == VER_0) {
+                       ret = regmap_field_read(priv->rf[TRDY], &trdy);
+                       if (ret)
+                               return ret;
+                       if (!trdy)
+                               continue;
+               }
 
-       *temp = code_to_degc(last_temp, s) * 1000;
+               ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], 
&last_temp);
+               if (ret)
+                       return ret;
 
-       return 0;
+               *temp = code_to_degc(last_temp, s) * 1000;
+
+               return 0;
+       } while (time_before(jiffies, timeout));
+
+       return -ETIMEDOUT;
 }
 
 #ifdef CONFIG_DEBUG_FS
@@ -739,19 +773,34 @@ int __init init_common(struct tsens_priv *priv)
                priv->tm_offset = 0x1000;
        }
 
-       res = platform_get_resource(op, IORESOURCE_MEM, 0);
-       tm_base = devm_ioremap_resource(dev, res);
-       if (IS_ERR(tm_base)) {
-               ret = PTR_ERR(tm_base);
-               goto err_put_device;
+       if (tsens_version(priv) >= VER_0_1) {
+               res = platform_get_resource(op, IORESOURCE_MEM, 0);
+               tm_base = devm_ioremap_resource(dev, res);
+               if (IS_ERR(tm_base)) {
+                       ret = PTR_ERR(tm_base);
+                       goto err_put_device;
+               }
+
+               priv->tm_map = devm_regmap_init_mmio(dev, tm_base, 
&tsens_config);
+       } else { /* VER_0 share the same gcc regs using a syscon */
+               struct device *parent = priv->dev->parent;
+
+               if (parent)
+                       priv->tm_map = syscon_node_to_regmap(parent->of_node);
        }
 
-       priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config);
-       if (IS_ERR(priv->tm_map)) {
-               ret = PTR_ERR(priv->tm_map);
+       if (IS_ERR_OR_NULL(priv->tm_map)) {
+               if (!priv->tm_map)
+                       ret = -ENODEV;
+               else
+                       ret = PTR_ERR(priv->tm_map);
                goto err_put_device;
        }
 
+       /* VER_0 have only tm_map */
+       if (!priv->srot_map)
+               priv->srot_map = priv->tm_map;
+
        if (tsens_version(priv) > VER_0_1) {
                for (i = VER_MAJOR; i <= VER_STEP; i++) {
                        priv->rf[i] = devm_regmap_field_alloc(dev, 
priv->srot_map,
@@ -770,6 +819,10 @@ int __init init_common(struct tsens_priv *priv)
                ret = PTR_ERR(priv->rf[TSENS_EN]);
                goto err_put_device;
        }
+       /* in VER_0 TSENS need to be explicitly enabled */
+       if (tsens_version(priv) == VER_0)
+               regmap_field_write(priv->rf[TSENS_EN], 1);
+
        ret = regmap_field_read(priv->rf[TSENS_EN], &enabled);
        if (ret)
                goto err_put_device;
@@ -792,6 +845,19 @@ int __init init_common(struct tsens_priv *priv)
                goto err_put_device;
        }
 
+       priv->rf[TSENS_SW_RST] =
+               devm_regmap_field_alloc(dev, priv->srot_map, 
priv->fields[TSENS_SW_RST]);
+       if (IS_ERR(priv->rf[TSENS_SW_RST])) {
+               ret = PTR_ERR(priv->rf[TSENS_SW_RST]);
+               goto err_put_device;
+       }
+
+       priv->rf[TRDY] = devm_regmap_field_alloc(dev, priv->tm_map, 
priv->fields[TRDY]);
+       if (IS_ERR(priv->rf[TRDY])) {
+               ret = PTR_ERR(priv->rf[TRDY]);
+               goto err_put_device;
+       }
+
        /* This loop might need changes if enum regfield_ids is reordered */
        for (j = LAST_TEMP_0; j <= UP_THRESH_15; j += 16) {
                for (i = 0; i < priv->feat->max_sensors; i++) {
@@ -807,7 +873,7 @@ int __init init_common(struct tsens_priv *priv)
                }
        }
 
-       if (priv->feat->crit_int) {
+       if (priv->feat->crit_int || tsens_version(priv) < VER_0_1) {
                /* Loop might need changes if enum regfield_ids is reordered */
                for (j = CRITICAL_STATUS_0; j <= CRIT_THRESH_15; j += 16) {
                        for (i = 0; i < priv->feat->max_sensors; i++) {
@@ -845,7 +911,11 @@ int __init init_common(struct tsens_priv *priv)
        }
 
        spin_lock_init(&priv->ul_lock);
-       tsens_enable_irq(priv);
+
+       /* VER_0 interrupt doesn't need to be enabled */
+       if (tsens_version(priv) >= VER_0_1)
+               tsens_enable_irq(priv);
+
        tsens_debug_init(op);
 
 err_put_device:
@@ -941,10 +1011,19 @@ static int tsens_register_irq(struct tsens_priv *priv, 
char *irqname,
                if (irq == -ENXIO)
                        ret = 0;
        } else {
-               ret = devm_request_threaded_irq(&pdev->dev, irq,
-                                               NULL, thread_fn,
-                                               IRQF_ONESHOT,
-                                               dev_name(&pdev->dev), priv);
+               /* VER_0 interrupt is TRIGGER_RISING, VER_0_1 and up is ONESHOT 
*/
+               if (tsens_version(priv) == VER_0)
+                       ret = devm_request_threaded_irq(&pdev->dev, irq,
+                                                       thread_fn, NULL,
+                                                       IRQF_TRIGGER_RISING,
+                                                       dev_name(&pdev->dev),
+                                                       priv);
+               else
+                       ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+                                                       thread_fn, IRQF_ONESHOT,
+                                                       dev_name(&pdev->dev),
+                                                       priv);
+
                if (ret)
                        dev_err(&pdev->dev, "%s: failed to get irq\n",
                                __func__);
@@ -973,6 +1052,19 @@ static int tsens_register(struct tsens_priv *priv)
                        priv->ops->enable(priv, i);
        }
 
+       /* VER_0 require to set MIN and MAX THRESH
+        * These 2 regs are set using the:
+        * - CRIT_THRESH_0 for MAX THRESH hardcoded to 120°C
+        * - CRIT_THRESH_1 for MIN THRESH hardcoded to   0°C
+        */
+       if (tsens_version(priv) < VER_0_1) {
+               regmap_field_write(priv->rf[CRIT_THRESH_0],
+                                  tsens_mC_to_hw(priv->sensor, 120000));
+
+               regmap_field_write(priv->rf[CRIT_THRESH_1],
+                                  tsens_mC_to_hw(priv->sensor, 0));
+       }
+
        ret = tsens_register_irq(priv, "uplow", tsens_irq_thread);
        if (ret < 0)
                return ret;
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 59d01162c..5dbed0a3f 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -13,6 +13,7 @@
 #define CAL_DEGC_PT2           120
 #define SLOPE_FACTOR           1000
 #define SLOPE_DEFAULT          3200
+#define TIMEOUT_US             100
 #define THRESHOLD_MAX_ADC_CODE 0x3ff
 #define THRESHOLD_MIN_ADC_CODE 0x0
 
@@ -25,7 +26,8 @@ struct tsens_priv;
 
 /* IP version numbers in ascending order */
 enum tsens_ver {
-       VER_0_1 = 0,
+       VER_0 = 0,
+       VER_0_1,
        VER_1_X,
        VER_2_X,
 };
-- 
2.30.2

Reply via email to