On 6/27/25 2:54 PM, Luca Weiss wrote:
> On Wed Jun 25, 2025 at 3:20 PM CEST, Konrad Dybcio wrote:
>> On 6/25/25 11:18 AM, Luca Weiss wrote:
>>> Add a dts for the PMIC used e.g. with SM7635 devices.
>>>
>>> Signed-off-by: Luca Weiss <luca.we...@fairphone.com>
>>> ---
>>> arch/arm64/boot/dts/qcom/pmxr2230.dtsi | 63
>>> ++++++++++++++++++++++++++++++++++
>>> 1 file changed, 63 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/pmxr2230.dtsi
>>> b/arch/arm64/boot/dts/qcom/pmxr2230.dtsi
>>> new file mode 100644
>>> index
>>> 0000000000000000000000000000000000000000..a7650f3230c01422b76ef78e897e5e7ae2f20cc6
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/pmxr2230.dtsi
>>> @@ -0,0 +1,63 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * Copyright (c) 2025, Luca Weiss <luca.we...@fairphone.com>
>>> + */
>>> +
>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>> +#include <dt-bindings/spmi/spmi.h>
>>> +
>>> +/ {
>>> + thermal-zones {
>>> + pmxr2230_thermal: pmxr2230-thermal {
>>> + polling-delay-passive = <100>;
>>> +
>>> + thermal-sensors = <&pmxr2230_temp_alarm>;
>>> +
>>> + trips {
>>> + pmxr2230_trip0: trip0 {
>>> + temperature = <95000>;
>>> + hysteresis = <0>;
>>> + type = "passive";
>>> + };
>>> +
>>> + pmxr2230_crit: pmxr2230-crit {
>>
>> This name is "meh", please change to tripN
>>
>>> + temperature = <115000>;
>>
>> Unless there's some actual electrical/physical SKU differences,
>> downstream lists 145C as critical for a PMIC carrying the same
>> name
>
> [ 0.085990] spmi-temp-alarm c400000.spmi:pmic@1:temp-alarm@a00: No ADC is
> configured and critical temperature 145000 mC is above the maximum stage 2
> threshold of 125000 mC! Configuring stage 2 shutdown at 125000 mC.
>
> Same for the PMIV0104:
>
> [ 0.086556] spmi-temp-alarm c400000.spmi:pmic@7:temp-alarm@a00: No ADC is
> configured and critical temperature 145000 mC is above the maximum stage 2
> threshold of 125000 mC! Configuring stage 2 shutdown at 125000 mC.
>
> What shall I do?
IIUC you'll need this series to achieve the full range
https://lore.kernel.org/linux-arm-msm/20250620001918.4090853-5-anjelique.melen...@oss.qualcomm.com/
Which makes me think the driver today may not be doing the greatest
thing in the world for this gen of PMICs..
We can either set it to 125 and leave a comment (which I assume is
sorta 'meh' because that's Linux specifics interfering with DT)
or we can wait until that series gets in
Personally, I wouldn't mind option 1 since we ultimately don't want
the PMIC to run at either 125 or 145 degC most of the time..
Konrad
