From: Gokul Sriram Palanisamy <[email protected]>

Enable nodes required for q6 remoteproc bring up.

Signed-off-by: Gokul Sriram Palanisamy <[email protected]>
Signed-off-by: George Moussalem <[email protected]>
---
 arch/arm64/boot/dts/qcom/ipq5424.dtsi | 68 +++++++++++++++++++++++++++++++++++
 1 file changed, 68 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi 
b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
index 
eb393f3fd728f0b2fc8cd93c849f8c170d76e312..c73a7a1bf397887befd384344394e30f05c372f2
 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
@@ -222,6 +222,11 @@ tfa@8a832000 {
                        no-map;
                        status = "disabled";
                };
+
+               q6_region: wcss@8a900000 {
+                       reg = <0x0 0x8a900000 0x0 0x2800000>;
+                       no-map;
+               };
        };
 
        soc@0 {
@@ -752,6 +757,37 @@ dwc_0: usb@8a00000 {
                        };
                };
 
+               q6v5_wcss: remoteproc@d100000 {
+                       compatible = "qcom,ipq5424-wcss-sec-pil";
+                       reg = <0 0x0d100000 0 0x4040>;
+                       firmware-name = "ath12k/IPQ5424/hw1.0/q6_fw0.mbn";
+                       interrupts-extended = <&intc GIC_SPI 508 
IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_wcss_in 0 0>,
+                                             <&smp2p_wcss_in 1 0>,
+                                             <&smp2p_wcss_in 2 0>,
+                                             <&smp2p_wcss_in 3 0>;
+                       interrupt-names = "wdog",
+                                         "fatal",
+                                         "ready",
+                                         "handover",
+                                         "stop-ack";
+
+                       mboxes = <&tmel_qmp 0>;
+                       qcom,smem-states = <&smp2p_wcss_out 1>,
+                                          <&smp2p_wcss_out 0>;
+                       qcom,smem-state-names = "stop",
+                                               "shutdown";
+
+                       memory-region = <&q6_region>;
+
+                       glink-edge {
+                               interrupts = <GIC_SPI 500 IRQ_TYPE_EDGE_RISING>;
+                               label = "rtr";
+                               qcom,remote-pid = <1>;
+                               mboxes = <&apcs_glb 8>;
+                       };
+               };
+
                timer@f420000 {
                        compatible = "arm,armv7-timer-mem";
                        reg = <0 0xf420000 0 0x1000>;
@@ -811,6 +847,14 @@ frame@f42d000 {
                        };
                };
 
+               apcs_glb: mailbox@f400000 {
+                       compatible = "qcom,ipq5424-apcs-apps-global",
+                                    "qcom,ipq6018-apcs-apps-global";
+                       reg = <0 0x0f400000 0 0x10000>;
+                       #clock-cells = <1>;
+                       #mbox-cells = <1>;
+               };
+
                apss_clk: clock-controller@fa80000 {
                        compatible = "qcom,ipq5424-apss-clk";
                        reg = <0x0 0x0fa80000 0x0 0x20000>;
@@ -1426,4 +1470,28 @@ timer {
                             <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
                             <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
        };
+
+       wcss: smp2p-wcss {
+               compatible = "qcom,smp2p";
+               qcom,smem = <435>, <428>;
+
+               interrupt-parent = <&intc>;
+               interrupts = <GIC_SPI 501 IRQ_TYPE_EDGE_RISING>;
+
+               mboxes = <&apcs_glb 9>;
+
+               qcom,local-pid = <0>;
+               qcom,remote-pid = <1>;
+
+               smp2p_wcss_out: master-kernel {
+                       qcom,entry-name = "master-kernel";
+                       #qcom,smem-state-cells = <1>;
+               };
+
+               smp2p_wcss_in: slave-kernel {
+                       qcom,entry-name = "slave-kernel";
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+       };
 };

-- 
2.52.0



Reply via email to