On 2/13/26 2:15 PM, Luca Weiss wrote: > Add bindings, driver and dts to support the Camera Subsystem on the > SM6350 SoC. > > These patches were tested on a Fairphone 4 smartphone with WIP sensor > drivers (Sony IMX576 and IMX582), the camera pipeline works properly as > far as I can tell. > > Though when stopping the camera stream, the following clock warning > appears in dmesg. But it does not interfere with any functionality, > starting and stopping the stream works and debugcc is showing 426.4 MHz > while the clock is on, and 'off' while it's off. > > Any suggestion how to fix this, is appreciated. > > [ 5738.590980] ------------[ cut here ]------------ > [ 5738.591009] gcc_camera_axi_clk status stuck at 'on'
FWIW 845 has .halt_check = BRANCH_VOTED here, which translates into 'dont check the state at disable', this one has BRANCH_HALT (i.e. spin and keep checking the hw state) +Taniya would BRANCH_VOTED be fitting for 6350 too? ^ Konrad
