Hi,
I tried the current git (9ef9dc69d4167276c04590d67ee55de8380bc1ad) and
got the following error message from ath5k:
ath5k_pci 0000:02:00.0: registered as 'phy0'
ath5k phy0: failed to resume the MAC Chip
ath5k_pci: probe of 0000:02:00.0 failed with error -5
Here is the lspci -vnn output:
02:00.0 Ethernet controller [0200]: Atheros Communications, Inc.
AR5006EG 802.11 b/g Wireless PCI Express Adapter [168c:001c] (rev 01)
Subsystem: Apple Computer Inc. Unknown device [106b:0086]
Flags: fast devsel, IRQ 17
Memory at 90100000 (64-bit, non-prefetchable) [disabled]
[size=64K]
Capabilities: [40] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
Capabilities: [60] Express Legacy Endpoint, MSI 00
Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Kernel modules: ath5k
The same device works with madwifi:
ath_rate_sample: 1.2 (svn r3339)
MadWifi: ath_attach: Switching per-packet transmit power control off
wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: ath_announce: Use hw queue 1 for WME_AC_BE traffic
wifi0: ath_announce: Use hw queue 0 for WME_AC_BK traffic
wifi0: ath_announce: Use hw queue 2 for WME_AC_VI traffic
wifi0: ath_announce: Use hw queue 3 for WME_AC_VO traffic
wifi0: ath_announce: Use hw queue 8 for CAB traffic
wifi0: ath_announce: Use hw queue 9 for beacons
ath_pci: wifi0: Atheros 5424/2424: mem=0x90100000, irq=17
I can also set the interface up and use iwlist ath0 scan.
Regards,
Tino
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
